The MA917B/1 probe makes pH testing easy and fast.Top features include:DOUBLE JUNCTIONThe double junction design reduces risk of clogging with the reference cell physically separated from the intermediate electrolyte.REFILLABLEThe MA917B/1 refillable with MA9011 3.5M KCl. This solution is sliver free. Sliver can cause silver precipitate to form at the junction resulting in clogging. Clogging causes erratic and slow readings. The ability to refill the electrolyte also extends the life of the electrode.GLASS BODYThe glass body is easily cleaned and resistant to chemicals.ROUND TIPThe round design of the tip provides the largest possible surface area for faster readings and is well suited to testing liquid samples.

DESIGN FEATURESThe MA924B/1 offers the following design features:PLATINUM SENSING RINGThe platinum ring design is the preferred for most ORP applications.GLASS BODYGlass body is ideal use in wine applications as it is easily cleaned and gives fast results.DOUBLE JUNCTION REFERENCEThe double junction means that virtually no silver from the reference cell is mixed with the sample and reduces the risks of clogging.REFILLABLEThe ability to refill the electrolyte solution extends the life of the probe. Use MA9011 3.5M KCl fill solution. With a refillable ORP electrode, best results are achieved if the fill cap is removed to create a higher flow rate. This results in a faster and more stable reading.

The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX). Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7

The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX). Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7

Accessories for the handy photometers MW10, MW11, MW13 and MW14 (art. no. 895547, 895548, 895549, 895550).These replacement glass cuvettes are made of high quality glass with perfect properties to ensure that light refraction is not distorted and readings are correct and accurate every time.The set contains 2x (10 ml) high quality glass cuvettes.

The Milwaukee MI0013 are replacement plastic stoppers for the MI0011 glass cuvettes.The replacement stoppers are designed to fit perfectly on the MI0011 glass cuvettes to prevent any leakage.The set contains 2 high-quality stoppers for MI0011 glass cuvettes.

- for users demanding fast, reliable, repeatable results with ease of useDESIGN FEATURES- Fast easy to read results with large digital LCD readout- Accurate to ±5 FNU or 5% of reading (whichever is greater)- Lightweight and portable- Tungsten Lamp for high accuracy- Easy measurement: just fill a cuvette with the sample after calibration, insert the cuvette, then press "read" and the reading displays on the large LCD- Simple easy-to-use calibration cuvettes- Easy 1-2-3 instruction steps- Auto shut off after 5 minutes of non-use, 9 volt (battery included)

The Free Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW10 Free Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 2.50 ppm free chlorine.Free Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW10 Tester

The Total Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW11 Total Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.Total Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW11 Tester

The MI527-25 IodinePowder reagent kit includes high-quality reagents that are ready-to-use with MW13. The MW34 meter and reagents use the DPD Method. The reaction between Iodineand the reagent causes a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.0 to 12.5 ppm (mg/L). Iodinepowder reagent replacement kit (25 tests) Pre-made reagents for precision and ease of use Marked with expiration date and lot number for traceability For use with the MW13 Tester

The MI528-25 Iron Powder Reagent Kit contains high quality reagents ready for use with the MW14 (Art. No. 895550). The MW14 meter and reagents use the USEPA method Phenatroline 315B adaptation. The reaction between iron and the reagent causes the sample to turn orange. Simply add the reagent to the sample, wait for the reaction and the photometer will determine the concentration by the colour. The reagents are designed for use with samples that have an expected range of 0.00 to 5.00 ppm (mg/L).- Reagent kit for iron powder (25 tests)- Pre-prepared reagents for precision and ease of use- Labeled with expiry date and lot number for traceability- For use with the MW14 tester

Manufacturer article number: Mi56P

Manufacturer article number: Mi57P

Manufacturer article number: Mi58P

Manufacturer article number: Mi59P

Manufacturer article number: Mi60P

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization.Key features include:- User friendly- Small & Ergonomic case design- Inexpensive- Large and easy to read display- Good accuracy and immediate resultsAccessories:- Mi526-25 Powder reagents for free chlorophotometer (25 pieces) (item no. 895551)- MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555)- MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556)The handy photometers are supplied in a carton box with all accessories.

The Milwaukee MW100 PRO pH meter features manual calibration and fast operation in a rugged design.It is ideal for users in pools, and hydroponic applications. This meter is also ideal for educators that want their students to learn the basics of pH meter calibration before going fully automatic.Design featuresFast easy to read results with large digital LCD readoutAccurate to ±0.2 pH with a 0.0-14.0 pH rangeLightweight, ergonomic and portableEasy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilizeSimple manual two-point calibration for increased accuracyGel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included)3 feet probe cables for extra flexibility when testingLow battery indicatorBattery life of approx. 300 hours of continuous use (battery included)

It performs pH measurements with a resolution of 0.01 pH and with manual temperature compensation.The MW101 PRO comes complete with an SE220 pH electrode, a 20 ml bag of pH 7.01 calibration solution, a calibration screwdriver, a 9 V battery and instructions.Design featuresFast, easy-to-read results with large digital LCD display Accuracy of ±0.02 pH with a pH range of 0.00-14.00Lightweight and portable Easy to measure: simply insert the probe into the sample, stir gently and wait for the reading to stabiliseEasy manual two-point calibration for increased accuracy Laboratory-grade gel-filled pH electrode with double connector for low maintenance and high performance, with screw cap for proper storage (SE220 probe included) 3-foot probe cable for added testing flexibility Automatic shut-off and low power requirements for approximately 300 hours of continuous operation. (Battery included)

It is a microprocessor-controlled pH/temperature meter with extended measuring range (-2.00 to 16.00 pH), automatic temperature compensation, automatic calibration in 2 points and an accuracy of ± 0.02 pH.Design featuresFast, easy-to-read results with large digital LCD displayExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: simply insert the probe into the sample, stir gently and wait for the reading to stabiliseSimple push-button, automatic two-point calibration for increased accuracyDouble-junction, laboratory-grade gel-filled pH electrode for low maintenance and high performance, with screw cap for proper storageRobust stainless steel temperature probe3-foot probe cable for added testing flexibilityAutomatic shut-off and low power consumption for approx. 300 hours of continuous operation (battery included)

This Meter is a specialist food pH meter and probe combination specifically designed for the pH analysis of semi-solid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.AccuracyWith two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration.The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.Special features:- Fast easy to read results with large digital LCD readout- Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)- Lightweight and portable- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize- Simple push button, automatic two-point calibration for increased accuracy- Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage- Rugged stainless temperature probe- 3 feet probe cables for extra flexibility when testing- Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

The MW105 MAX meter combines all the features of a benchtop meter in an IP67-rated portable meter.The units are equipped with a range of new diagnostic functions that improve the reliability of pH measurement:Waterproof IP67 housingExtended pH range: -2.00 to 20.00 pHUp to 3-point automatic pH calibration, 7 standard calibration buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45)alphanumeric LCD display for user-friendly, intuitive information, warning and error messagesautomatic switch-off function to conserve battery powerinternal clock and date for monitoring various time-dependent functions (calibration timestamp, calibration timeout)Special GLP button

The MW106 MAX meter combines all the features of a benchtop meter in an IP67 portable meter.The meter is equipped with a range of new diagnostic functions that improve the reliability of pH measurement.Hand carrying caseEach meter is supplied in a hard carrying case, ideal for on-site measurements.

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - Mi524-25 Powder reagents for total chlorine photometer (25 pieces) (art. no. 895552) - MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories.