The Milwaukee MW605 MAX Galvanic Portable Waterproof Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.The Milwaukee MW605 MAX DO Meter is preferred by people looking for lab level accuracy without the cost.The Milwaukee DO Meter is popular with everyone from field biologists, educators, fish farmers, water treatement plants and labs.DESIGN FEATURESFast, easy-to-read results with large digital LCD readoutGalvanic probe means no conditioning timeRepeatable, accuracy to ±1.5% of readingWater Proof IP 67 ratedLightweight and portableSimple 1 or 2 % saturation calibration points at 100% (water saturated air) and 0% (zero oxygen solution)Dedicated GLP key to store and recall data on system statusAvailable log space for up to 1000 recordsLogged data export via USB cableAltitude and Salinity compensationAutomatic temperature compensation °F & °CUses MA860 (included) reinforced Galvanic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor2x O-rings, membranes and one protective cap included3m probe cable for extra flexibility when testing3 x 1.5 volt akaline AA battery (battery included) approx. 200 hours of battery life with continuous use with low battery warning

This 3-in-1 low range combination meter allows you to measure pH, EC (conductivity) and TDS with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1382 ppm calibration solution, a 9 V battery and instructions.

This 3-in-1 combination meter allows you to measure pH, EC high range (conductivity) and TDS high range with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1500 ppm calibration solution, a 9 V battery and instructions.

Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature, featuring automatic temperature compensation (ATC) and a replaceable electrode. The Milwaukee MW803 was specifically designed for applications in the low conductivity range. Milwaukee MW803 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW803 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into one compact unit, the meter is ideal for users who need to monitor water quality quickly and reliably without relying on multiple separate devices. The MW803 was specifically developed for low-conductivity applications. This makes the device particularly suitable for hydroponics, drinking water analysis, aquarium maintenance, and other applications involving low salt and mineral concentrations. Simultaneous measurement of multiple parameters simplifies water quality assessment and supports efficient monitoring of water and nutrient solutions. To ensure precise results, the meter features automatic temperature compensation (ATC). Temperature-related fluctuations are automatically accounted for during conductivity and TDS measurements, ensuring reliable readings even under changing environmental conditions. Additionally, the integrated temperature sensor allows for direct monitoring of the sample temperature. Another advantage of the Milwaukee MW803 is its replaceable electrode. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire meter. This reduces long-term costs and significantly extends the device's service life. Automatic calibration ensures simple and convenient setup. One- or two-point calibration options are available for pH measurements, while conductivity measurement utilizes automatic single-point calibration. This allows the device to be quickly adapted to various measurement requirements. The waterproof housing protects the meter during use in damp environments, making the MW803 a reliable solution for both mobile and stationary applications. Its robust construction and ease of use make the device an attractive choice for both professional users and demanding hobbyists. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0 to 3999 µS/cm | 0 to 2000 ppm (mg/L) TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Resolution: 0.01 pH | 1 µS/cm | 1 ppm | 0.1 °C (0.1 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale | ±0.5 °C (±1 °F) Calibration: Automatic Temperature compensation: Automatic (ATC) Key Benefits at a Glance Simultaneous measurement of pH, conductivity, TDS, and temperature Specially designed for low-conductivity applications Automatic temperature compensation Automatic calibration functions Reliable monitoring of multiple water parameters with a single device Typical Applications Drinking water analysis Aquariums Water treatment Laboratory applications Nutrient solutions General water analysis Scope of Delivery Milwaukee MW803 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with this device? Yes, you can measure pH, conductivity, TDS, and temperature with a single device. Is the meter suitable for aquariums and ponds? Yes, it helps you quickly check key water parameters and detect changes early on. Can I replace the probe if it wears out? Yes, the pH probe is replaceable, allowing you to continue using the device for a long time. Is the device suitable for outdoor use? Yes, the housing is waterproof and designed for both humid environments and outdoor use. Do I need to account for temperature myself when taking measurements? No, the device automatically compensates for temperature fluctuations to ensure reliable results. Is it easy for beginners to use? Yes, the measurement process is straightforward, and the readings are displayed directly on the screen. What applications is this meter best suited for? It is ideal for hydroponics, aquariums, pools, drinking water testing, and many other water analysis applications.

Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature. The Milwaukee MW804 was specifically designed for applications involving higher conductivity and TDS levels and features automatic temperature compensation (ATC), automatic calibration, and a replaceable electrode. Milwaukee MW804 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW804 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into a single device, the meter is ideally suited for applications requiring reliable monitoring of water quality and mineral content. Compared to the Milwaukee MW803, the MW804 was developed for applications with higher conductivity and TDS levels. This makes the device particularly suitable for use in agriculture, aquaculture, and water treatment, as well as in applications involving elevated salt and mineral concentrations. Simultaneous parameter monitoring enables a comprehensive assessment of water quality and reduces the effort required for individual measurements. To ensure reliable results, the MW804 features automatic temperature compensation (ATC). Temperature-related effects on conductivity and TDS measurements are automatically accounted for, ensuring consistent readings even under changing environmental conditions. Additionally, the sample temperature can be directly measured and monitored. The replaceable electrode ensures a long service life and cost-effective maintenance. Should the electrode wear out or sensor performance decline, it can be replaced without needing to replace the entire meter. This reduces ongoing costs and simplifies device maintenance. Automatic calibration facilitates quick and convenient setup. One- or two-point calibration is available for pH measurement, while conductivity measurement utilizes automatic one-point calibration. This allows the device to be easily adapted to various measurement tasks. Thanks to its waterproof housing, the MW804 is suitable for both laboratory use and mobile outdoor measurements. Its robust construction and ease of use make it a reliable solution for professional users and demanding monitoring applications. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale Calibration: Automatic Temperature compensation: Automatic Key benefits at a glance Simultaneous measurement of pH, conductivity, TDS, and temperature Designed for applications with higher conductivity and TDS levels Automatic temperature compensation Automatic calibration functions Suitable for portable and stationary applications Typical applications Agriculture Aquaculture Water treatment Process water monitoring Nutrient solutions Laboratory applications Scope of delivery Milwaukee MW804 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Is the device suitable for water with high mineral or nutrient concentrations? Yes, the MW804 is particularly well-suited for water with higher conductivity and TDS levels. Do I need multiple devices for different water parameters? No, pH, conductivity, TDS, and temperature are all measured with a single device. Is the meter suitable for hydroponics and nutrient solutions? Yes, it was designed to reliably monitor key water parameters in nutrient solutions. Can I replace the pH probe if necessary? Yes, the probe is replaceable. This saves costs in the long run and extends the device's service life. Is the device easy to use? Yes, the readings are clearly displayed, and the device is quick to learn. Can I use the meter outdoors? Yes, the robust, water-resistant housing makes it well-suited for outdoor use. Do I need to account for water temperature during measurement? No, the device automatically compensates for temperature fluctuations to ensure the most accurate readings possible.

This MW805 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from .40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852D/1 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers

This High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from 0.40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutionsGel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers

Waterproof pH meter with a replaceable double-junction electrode for reliable pH measurements in aquaculture, pools, hydroponics, and laboratory applications. The Milwaukee PH51 stands out due to its ease of use, flexible one- or two-point calibration, and long battery life. Milwaukee PH51 waterproof pH meter with replaceable probe The Milwaukee PH51 is a compact, waterproof pH meter designed for reliable pH measurements across a wide range of applications. Its user-friendly design and robust construction make it suitable for both portable use and routine monitoring in aquaculture, pools, hydroponics, schools, and laboratories. A key advantage of the PH51 is its replaceable pH electrode. If the probe wears out or performance declines, it can be replaced without needing to discard the entire meter. This extends the device's service life and reduces long-term operating costs. The integrated double-junction electrode ensures reliable and stable measurement performance. For optimal accuracy, the device can be manually adjusted using one- or two-point calibration. The clear display allows for quick and easy reading of measurements, making the PH51 suitable for both experienced users and beginners. Its waterproof housing makes the meter ideal for use in humid environments. The compact design ensures easy transport and handling, while the long battery life guarantees reliable operation over numerous measurements. The Milwaukee PH51 offers a practical solution for anyone needing to monitor pH levels regularly while prioritizing ease of use, a replaceable electrode, and a robust design. Technical data Measurement parameter: pH Measurement range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Manual, 1- or 2-point Advantages Water-resistant housing for use in humid environments Replaceable pH electrode for extended service life Double-junction electrode Compact and handy design Long battery life Easy to use Suitable for mobile and stationary applications Typical applications Aquaculture Coral care Swimming pools Hydroponics Schools and education Laboratory applications Water analysis General pH monitoring Frequently Asked Questions Why do I need a pH tester in the first place? It’s used to measure whether the water is more acidic or more alkaline. Is the pH meter really waterproof and suitable for outdoor use? Yes, the device is waterproof and can be used without any problems in the garden, by the pool or outdoors. How accurately does the device measure the pH value? It provides very accurate results with a margin of error of just ±0.1 pH. How quickly do I get a result? You can see the current pH value on the display in a few seconds. Is the device also suitable for beginners? Yes. Simply switch it on, hold it in the water and read the value straight away. Is calibration easy for beginners to carry out? Yes, the manual 2-point calibration is easy to understand and quick to perform. Can I replace the probe myself if it wears out? Yes, the probe is replaceable and can be easily swapped out. Where can I use the pH tester? Ideal for aquariums, hydroponics, horticulture, swimming pools and many other applications. How do I care for and store the meter correctly? Clean it regularly, calibrate it correctly and store the probe in storage solution.

Waterproof pH meter with a replaceable double-junction electrode for precise pH measurements in laboratories, aquariums, water analysis, and other applications. The Milwaukee PH54 stands out due to its fine measurement resolution, ease of use, flexible one- or two-point calibration, and long battery life. Milwaukee PH54 waterproof pH meter with replaceable probe The Milwaukee PH54 is a compact, waterproof pH meter designed for precise pH measurements across a wide range of applications. Compared to the Milwaukee PH51, the PH54 offers finer measurement resolution, making it ideal for users who require more detailed pH readings. Thanks to its robust design and user-friendly operation, the device is suitable for both portable use and routine spot checks. A key advantage of the PH54 is its replaceable pH electrode. This allows the probe to be swapped out when worn, eliminating the need to replace the entire meter. This reduces maintenance costs and extends the device's service life. The integrated double-junction electrode ensures reliable, stable performance, even with frequent use. To ensure optimal performance across various measurement tasks, the device features manual one- or two-point calibration. The clear display allows for quick reading of measurements and ensures convenient operation during daily use. The waterproof housing protects the device when working in damp environments, making it a reliable solution for diverse applications. Additionally, the long battery life ensures the device is always ready for use and supports cost-effective operation over many hours of measurement. Technical Specifications: (h3) Technical Specifications: Measurement parameter: pH Measurement range: 0.00 to 14.00 pH Resolution: 0.01 pH Accuracy: ±0.1 pH Calibration: Manual, 1- or 2-point calibration Advantages Water-resistant housing Higher measurement resolution than the Milwaukee PH51 Replaceable pH electrode Manual one- or two-point calibration Compact and handy design Long battery life Typical Applications Aquaristics Water analysis Horticulture Environmental analysis General pH monitoring Scope of delivery Milwaukee PH54 pH meter Batteries User manual Frequently Asked Questions Is the pH54 suitable for outdoor use in all weather conditions? Yes, the device is waterproof and operates reliably outdoors. Does the device also display the water temperature? Yes, the pH value and temperature are displayed simultaneously on the screen. How accurate are the readings in everyday use? The measurement is highly precise, with an accuracy of ±0.1 pH. Do I need to recalibrate the device frequently? For best results, we recommend calibrating before each measurement or doing so regularly. Can I replace the probe if it stops measuring accurately? Yes, the electrode is replaceable, which significantly extends the device's service life. Is the device easy for beginners to use? Yes, it is simple to operate, and calibration is quick to perform. For which applications is this pH meter particularly useful? It is ideal for aquariums, plant cultivation, pools, laboratories, and water analysis.

Waterproof pH and temperature meter with automatic temperature compensation and a replaceable electrode. The Milwaukee PH55 enables simultaneous measurement of pH and temperature and offers automatic one- or two-point calibration. Milwaukee PH55 waterproof pH and temperature meter with automatic temperature compensation and replaceable probe The Milwaukee PH55 is a compact, waterproof meter designed for the simultaneous determination of pH and temperature. By combining these two measurement parameters, the device is ideal for applications requiring reliable water quality monitoring. Its robust design and ease of use make the PH55 a practical solution for both portable use and routine measurements in laboratory or technical environments. A key advantage of the Milwaukee PH55 is its integrated automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during measurement, ensuring greater accuracy and reliable pH results, even under changing conditions. The replaceable electrode ensures cost-effective, long-term use of the meter. The probe can be replaced when worn without needing to discard the entire unit, thereby reducing maintenance costs and extending the device's service life. For user convenience, the PH55 features automatic one- or two-point calibration. It supports various international buffer standards, allowing for flexible use across a wide range of applications. Simultaneous display of pH and temperature further simplifies the monitoring and evaluation of measurements. The waterproof housing protects the meter during operation in damp environments, ensuring reliable performance under demanding conditions. Combined with its simple calibration and integrated temperature measurement, the Milwaukee PH55 is suitable for both private and professional users. Technical Specifications Measurement parameters: pH | Temperature Measurement range: -2.0 to 16.0 pH | -5.0 to 60.0 °C pH range: -2.0 – 16.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Automatic 1- or 2-point calibration with two sets of preset buffer solutions (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Benefits of the PH55 Simultaneous measurement of pH and temperature Waterproof housing Replaceable electrode Automatic one- or two-point calibration Support for various buffer standards Compact and handy design Typical Applications Aquaristics Water analysis Environmental monitoring Laboratory applications Water treatment Scope of Delivery Milwaukee PH55 pH and temperature meter Batteries User manual Frequently Asked Questions Can I read the pH value and temperature at the same time? Yes, both values are clearly displayed simultaneously. Is the device suitable for cold or warm water samples? Yes, it provides reliable measurements across a wide temperature range of -5 to 60°C. How quickly do I get a stable reading? The probe responds quickly and displays stable readings after a short time. Can I replace the probe myself if it wears out? Yes, the electrode can be easily replaced by unscrewing it. Does the device really float if it falls into the water? Yes, it floats on the water's surface and does not sink. Do I need to calibrate the device regularly? Yes, simple automatic 1- or 2-point calibration ensures accuracy. Is the device easy for beginners to use? Yes, operation is simple and very intuitive thanks to the use of icons.

Waterproof pH and temperature meter with automatic temperature compensation and a replaceable electrode. The Milwaukee PH56 offers higher measurement accuracy and finer resolution than the PH55. Milwaukee PH56 Waterproof pH and temperature meter with automatic temperature compensation and replaceable probe The Milwaukee PH56 is a high-quality pH and temperature meter designed for users who require highly precise measurement results. By simultaneously measuring pH and temperature, the device is suitable for a wide range of applications—including laboratories, water analysis, the food industry, and aquarium keeping—wherever reliable monitoring of readings is essential. The Milwaukee PH56 was developed for users seeking highly accurate pH measurements. Compared to the Milwaukee PH55, this device offers higher measurement resolution and improved accuracy, allowing even minor changes in pH levels to be detected and documented more reliably. This makes the PH56 particularly attractive for laboratory applications, quality control, research, and other fields where precision is critical. Integrated automatic temperature compensation (ATC) automatically accounts for temperature fluctuations during measurement, ensuring stable and reliable pH readings even under changing environmental conditions. Additionally, the temperature measurement function allows for the direct monitoring of sample temperatures, facilitating the interpretation of results. Another advantage of the Milwaukee PH56 is its replaceable electrode. The probe can be swapped out when worn, eliminating the need to replace the entire meter. This reduces ongoing costs and significantly extends the device's service life. Its robust, waterproof design also makes it a reliable choice for portable use and for working environments with high humidity. For ease of use, the PH56 features automatic one- or two-point calibration. It supports various international buffer standards, allowing the device to be used flexibly across a range of applications. The clear display ensures that readings can be taken quickly and easily. Thanks to its waterproof housing, the PH56 is suitable for both laboratory use and mobile outdoor applications. Its compact design and ease of use make it a practical solution for professional and demanding users. Technical Data Measurement parameters: pH | Temperature Measurement range: -2.00 to 16.00 pH | -5.0 to 60.0 °C pH range: -2.00 – 16.00 pH Resolution: 0.01 pH Accuracy: ±0.05 pH Calibration: Automatic Temperature compensation: Automatic Key benefits at a glance Simultaneous measurement of pH and temperature Higher measurement resolution and accuracy than the Milwaukee PH55 Automatic one- or two-point calibration Support for various buffer standards Precise measurements for demanding applications Suitable for mobile and stationary use Typical applications Laboratory applications Water analysis Food industry Aquaristics Hydroponics Environmental monitoring Water treatment Scope of delivery Milwaukee PH56 pH and temperature meter Batteries User manual Frequently Asked Questions Can I measure pH and temperature simultaneously? Yes, both values are displayed on the screen at the same time. Does the device provide accurate results at varying water temperatures? Yes, automatic temperature compensation ensures precise readings. Is the PH56 suitable for outdoor use? Yes, the waterproof housing provides reliable protection against moisture and splashes. Can I replace the probe myself if it wears out? Yes, the electrode is replaceable and can be easily swapped out. Is the device easy to carry and use on the go? Yes, it is compact and lightweight, fitting easily into a pocket or toolbox. How involved is the calibration process? Calibration is automatic and quick to complete. What applications is the PH56 particularly well-suited for? Ideal for aquariums, plant cultivation, brewing, pools, laboratories, and water analysis.

Waterproof meter for the simultaneous measurement of pH, redox potential, and temperature. The Milwaukee PH58 features automatic temperature compensation and a replaceable electrode. Milwaukee PH58 waterproof pH, redox, and temperature meter with automatic temperature compensation and replaceable electrode The Milwaukee PH58 is a versatile meter for the simultaneous determination of pH, redox potential (ORP), and temperature. By combining these three key parameters, the device is ideally suited for applications requiring a comprehensive assessment of water quality. Whether in aquaculture, water treatment, environmental analysis, or the laboratory, the PH58 enables reliable and convenient monitoring of various readings using a single device. A key advantage of the Milwaukee PH58 is its redox measurement capability. In addition to pH and temperature, it measures the oxidation-reduction potential of a solution. This provides users with a more complete picture of water quality, allowing for better monitoring and documentation of critical processes. To ensure precise results, the device features automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during pH measurement, ensuring stable and reliable readings. The integrated temperature sensor also allows for direct monitoring of the sample temperature. The replaceable electrode ensures a long service life for the meter. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire unit. This significantly reduces ongoing costs and simplifies maintenance. pH calibration is performed automatically via a one- or two-point process using standard buffer solutions. The redox sensor comes factory-calibrated and is ready for immediate use, enabling quick setup and reducing the workload for the user. The waterproof housing protects the device during work in damp environments, making the PH58 a reliable solution for both mobile and stationary use. Its robust design, ease of use, and versatile measurement capabilities make this model an ideal companion for professional users and demanding measurement tasks. Technical Specifications Measurement parameters: pH | ORP (Redox) | Temperature Measurement range: -2.00 to 16.00 pH | ±1000 mV ORP | -5.0 to 60.0 °C (23 to 140 °F) Resolution: 0.01 pH | 1 mV | 0.1 °C (0.1 °F) Accuracy: ±0.05 pH | ±2 mV | ±0.5 °C (1 °F) Calibration: Automatic 1- or 2-point calibration with two sets of preset buffers (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Key Benefits at a Glance Simultaneous measurement of pH, ORP, and temperature Integrated ORP measurement for advanced water analysis Automatic one- or two-point calibration for pH measurements Factory-calibrated ORP measurement High measurement accuracy and fine resolution Suitable for mobile and stationary applications Typical Applications Aquaculture Aquarium hobby Water treatment Environmental monitoring Laboratory applications Process water monitoring Scope of Delivery Milwaukee PH58 pH, ORP, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with the PH58? Yes, the device measures pH, temperature, and redox levels in a single operation. Is the meter suitable for use in pools or ponds? Yes, it is ideal for pools, ponds, aquariums, and other water applications. What happens if the device falls into the water? No problem—the PH58 is waterproof and floats. Do I need to replace the probe if the readings become less accurate? Yes, the probe can be easily replaced without having to buy a new device. Does the device provide accurate readings at varying temperatures? Yes, automatic temperature compensation adjusts for temperature fluctuations. Is calibration complicated or time-consuming? No, calibration is simple and can be completed in just a few steps. Is the PH58 suitable for beginners? Yes, the device is easy to use and displays readings clearly.

Compact digital pH tester for the rapid determination of pH levels in liquids. The Milwaukee PH600 stands out thanks to its ease of use, easy-to-read display, manual 1-point calibration, and long battery life. Ideal for aquariums, hydroponics, water analysis, and many other applications. Milwaukee PH600 digital pH tester – Simple operation for quick measurements The Milwaukee PH600 is a compact digital pH tester that enables fast and straightforward pH measurements across various applications. Its handy design makes the device ideal for mobile use, allowing for reliable on-site pH monitoring. The measurement range covers the entire pH spectrum—from highly acidic to highly alkaline solutions—making the PH600 a versatile tool for aquariums, hydroponics, water analysis, horticulture, laboratory work, and many other fields. The easy-to-read LCD display ensures convenient reading of measurements and makes the device simple to operate, even for users without extensive experience in measurement technology. To ensure reliable accuracy, the pH tester features manual 1-point calibration. This allows the device to be quickly recalibrated whenever necessary, guaranteeing consistently precise results. Additionally, the long battery life ensures reliable operation over extended periods, making the Milwaukee PH600 a practical companion for routine checks. Thanks to its ease of use, compact design, and reliable measurement technology, the Milwaukee PH600 is suitable for both private and professional users seeking a cost-effective pH measurement solution. Benefits Compact and handy pH tester Manual 1-point calibration Long battery life Suitable for mobile and stationary applications Versatile use across various fields Measurement parameter: pH Measurement range: 0.0 to 14.0 pH Typical applications Aquaristics Hydroponics Water analysis Horticulture Laboratory applications Education and training General pH monitoring Frequently Asked Questions How quickly does the device display the pH value? You see the reading immediately after immersion. Can I use the device in the garden and in water? Yes, you can use it for plants, soil, hydroponics, and pools. Is the device easy for beginners to use? Yes, you can simply switch it on, take a measurement, and read the value directly. How accurate are the measurements in everyday use? The measurements are very reliable and help you ensure proper care. Do I need to consider the temperature? No, the device automatically adjusts to different temperatures. Can it also help me take better care of my plants? Yes, you can quickly see whether the pH level is optimal for healthy plants. Is the device robust enough for regular use? Yes, it is designed for daily use in the garden or around the house.

for pH/ORP electrodes

for pH/ORP electrodes

Waterproof TDS meter for measuring dissolved solids in the low range. The Milwaukee T75 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T75 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T75 is a compact, waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Specifically developed for low-range measurements, this tester is ideal for applications requiring reliable water quality monitoring. Automatic temperature compensation (ATC) ensures that temperature fluctuations during measurement are automatically accounted for, delivering consistent results even under changing environmental conditions. This is particularly advantageous for applications such as water treatment, aquarium maintenance, and routine water testing. Another key feature of the Milwaukee T75 is its replaceable probe. Should the electrode wear out or performance decline, it can be replaced individually without the need to discard the entire unit, thereby extending the device's service life and reducing maintenance costs. Manual single-point calibration allows for easy adjustment of the device to specific measurement requirements. Its compact design ensures a comfortable grip, making it suitable for both portable use and regular operation in laboratories or technical facilities. The waterproof housing protects the device during use in damp environments, ensuring reliable operation across a wide range of conditions. Combined with ease of use and precise measurement technology, the Milwaukee T75 offers a practical solution for monitoring TDS levels. Technical Data Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 1999 ppm (mg/L) Resolution: 1 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Specifically designed for low-range TDS measurements Replaceable probe Compact and portable design Reliable monitoring of total dissolved solids Suitable for mobile and stationary applications Typical Applications Aquaristics Water treatment Drinking water monitoring Environmental analysis Water quality monitoring General TDS measurements Scope of Delivery Milwaukee T75 TDS meter Batteries User manual Frequently Asked Questions Is this meter suitable for drinking water? Yes, it is ideal for quickly testing drinking water and other water samples. Can I check the water quality myself? Yes, the meter displays a reading directly on the screen in just a few seconds. How does a TDS meter benefit me in everyday life? You can quickly tell if the composition of your water has changed. Is the device also suitable for aquariums or reverse osmosis systems? Yes, many users employ it to monitor aquarium and filtered water. Do I need to take special care of the device after each use? No, it is usually sufficient to rinse the measuring tip briefly after use. Can the device get wet? Yes, the casing is waterproof and designed for use around water. Is it complicated to use? No, the device is easy to use and is also suitable for beginners.

Waterproof TDS meter for measuring dissolved solids in the high range. The Milwaukee T76 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T76 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T76 is a waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Unlike meters designed for lower TDS ranges, the T76 is particularly well-suited for applications involving higher concentrations of dissolved substances, offering reliable water quality monitoring in demanding environments. Automatic temperature compensation (ATC) automatically adjusts for temperature-related fluctuations during measurement. This ensures consistent and reliable results, even amidst changing ambient conditions or varying sample temperatures. A key advantage of the Milwaukee T76 is its replaceable probe. If the sensor wears out or performance declines, the electrode can be replaced without needing to discard the entire unit. This significantly reduces maintenance costs and extends the device's service life. Manual single-point calibration allows for easy adjustment to specific measurement requirements. Its compact design ensures a comfortable grip, making the device suitable for both portable use and regular operation in technical facilities or laboratory settings. The waterproof housing protects the meter during use in damp environments, ensuring reliable operation under challenging conditions. Ease of use and robust construction make the Milwaukee T76 a practical solution for users who need to precisely monitor higher TDS levels. Technical Specifications Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 9990 ppm (mg/L) Resolution: 10 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Waterproof housing Suitable for high-range TDS measurements Replaceable probe Rugged design for demanding operating conditions Typical Applications Water treatment Process water monitoring Aquariums Environmental analysis Laboratory applications Scope of Delivery Milwaukee T76 TDS meter Batteries User manual Frequently Asked Questions Can I quickly see if my water is clean enough using this device? Yes, it displays the amount of dissolved substances in the water directly. Is the meter suitable for pools and aquariums as well? Yes, it is ideal for aquariums, pools, water treatment, and similar applications. Do I need to worry about inaccurate readings due to temperature fluctuations? No, automatic temperature compensation ensures stable results. How often do I need to calibrate the device? A simple 1-point calibration—performed occasionally depending on usage—is sufficient. What happens if the probe gets dirty over time? It can be easily cleaned or replaced if necessary. Can I use the device outdoors? Yes, it is waterproof and suitable for outdoor use. Is the device easy to use, even without prior experience? Yes—simply dip it in, read the result, and you're done; it’s very straightforward.