Thank you for your interest in our smart and individually configurable measuring instruments of the HORIBA LAQUA WQ-300 series. The high-quality digital multi-parameter handheld meters feature a large colour LCD display with LED backlight (7 cm x 5.2 cm), making them ideally suited for field use under a wide range of conditions and in direct daylight. Use our configurator to select the appropriate measuring instrument from the HORIBA WQ-300 series with 1 to 3 measuring channels, the desired measuring parameters (sensor cartridges) and the required cable length according to your individual needs. The sensor cables feature an integrated sensor receptacle and digital module. Additional measuring parameters can also be connected at a later stage using the corresponding sensor cable or carried in the measuring case as supplementary equipment. As with other HORIBA handheld meters, the devices are particularly resistant to shocks, slipping and scratches thanks to their special rubber coating. Operation requires four standard AA batteries with 2500 mAh. For greater flexibility during mobile use, the WQ-300 series can alternatively be powered by a power bank or battery pack via the integrated USB interface. An IP67 certification, which confirms dust-tightness and protection against temporary immersion for up to 30 minutes at a water depth of one metre, completes the professional overall package alongside the ergonomic design and easy operation. HORIBA offers a three-year warranty on the handheld measuring instruments of the LAQUA WQ-300 series. Functions and Features During measurements, users are supported by operating instructions displayed in the form of smiley symbols. These are complemented by an LED status indicator on the sensor to help prevent operating errors and implausible measurement results. The small number of control buttons and the absence of complex, nested menus ensure that the instruments remain easy and safe to operate, even when used intermittently or by different users. Additional Functions Electrode wear indicator Measurement stability indicator on the instrument and sensor Hold function to "save" the current measured value on the display Individual measuring point identification with up to 8 characters Automatic calibration functions Integrated sensor holders Self-diagnostic function GLP functions Fold-out stand for convenient hands-free measurements Transfer of measurement data to a computer or smartphone via USB or WiFi Measuring Case for Mobile Use All handheld meters of the WQ-300 series are supplied in a reinforced measuring case for mobile outdoor use. The case provides space for the measuring instrument, electrodes and cables, as well as up to eight 60 ml bottles of buffer solutions. An integrated holder for buffer solution bottles facilitates calibration. Automatic Sensor Recognition A particular advantage of the WQ-300 series is automatic sensor recognition through sensor cables with integrated digital sensor receptacles. Information about the sensor, calibration data and measurement settings is stored in the digital sensor module and transmitted to the measuring instrument. In addition, all connected sensors can be calibrated simultaneously, as each sensor module independently stores measurement and calibration data and transmits them to the WQ-300 series measuring instrument. Analogue sensors can optionally be connected using the HORIBA BNC sensor adapter. Please contact us for further information. Available Languages German English French Spanish Portuguese Chinese Scope of Delivery WQ-300 series handheld meter in a carrying case Selected digital electrode, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptacle Instruction manual Manufacturer Article Number WQ-310-K (1 channel): 3200832605 Calibrating the Instrument pH Measurement To obtain accurate results, a two-point calibration must be carried out. The following buffer solutions are recommended: pH 7.00 and 4.01 for acidic samples pH 7.00 and 10.01 for alkaline samples If the expected pH value of the sample is unknown, a three-point calibration using pH 7.00, 4.01 and 10.01 is recommended. It is recommended to begin calibration with pH 7.00. Conductivity Measurement For conductivity measurements, a single-point calibration is sufficient, for example at 1413 µS/cm. For greater accuracy, a multi-point calibration can also be performed. Important Note on the Chloride Sensor Note: If a chloride sensor is selected, it is supplied without chloride ionic strength adjuster and chloride electrode filling solution. These solutions must be purchased separately by the customer. The chloride sensor cannot be used without the required filling solution. Why We Use These Measuring Devices in Water Treatment Precise calcium control is an important element of efficient water treatment, from drinking water purification and process water management to environmental analysis. Elevated calcium concentrations can contribute to scale formation, pipe damage, increased energy consumption and disruptions in chemical processes. For these applications, we offer configurable solutions from the HORIBA LAQUA WQ series in our online shop. Available Measuring Instruments WQ310-K: Single-channel solution for targeted measurements. WQ320-K: Simultaneous measurement of two parameters, such as calcium and conductivity. WQ330-K: Three-channel measurement for complex multi-parameter analyses. Benefits for Water Treatment Reliable measurement data for monitoring and optimising water treatment systems. Digital evaluation, documented measurement results and interfaces for data transfer. Robust design and practical measuring case for mobile on-site use. Flexible combination of calcium measurements with other parameters such as pH, conductivity or redox potential. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required.

Thank you for your interest in our smart and individually configurable measuring instruments of the HORIBA LAQUA WQ-300 series. The high-quality digital multi-parameter handheld meters feature a large colour LCD display with LED backlight (7 cm x 5.2 cm), making them ideally suited for field use under a wide range of conditions and in direct daylight. Use our configurator to select the appropriate measuring instrument from the HORIBA WQ-300 series with 1 to 3 measuring channels, the desired measuring parameters (sensor cartridges) and the required cable length according to your individual needs. The sensor cables feature an integrated sensor receptacle and digital module. Additional measuring parameters can also be connected at a later stage using the corresponding sensor cable or carried in the measuring case as supplementary equipment. As with other HORIBA handheld meters, the devices are particularly resistant to shocks, slipping and scratches thanks to their special rubber coating. Operation requires four standard AA batteries with 2500 mAh. For greater flexibility during mobile use, the WQ-300 series can alternatively be powered by a power bank or battery pack via the integrated USB interface. An IP67 certification, which confirms dust-tightness and protection against temporary immersion for up to 30 minutes at a water depth of one metre, completes the professional overall package alongside the ergonomic design and easy operation. HORIBA offers a three-year warranty on the handheld measuring instruments of the LAQUA WQ-300 series. Functions and Features During measurements, users are supported by operating instructions displayed in the form of smiley symbols. These are complemented by an LED status indicator on the sensor to help prevent operating errors and implausible measurement results. The small number of control buttons and the absence of complex, nested menus ensure that the instruments remain easy and safe to operate, even when used intermittently or by different users. Additional Functions Electrode wear indicator Measurement stability indicator on the instrument and sensor Hold function to "save" the current measured value on the display Individual measuring point identification with up to 8 characters Automatic calibration functions Integrated sensor holders Self-diagnostic function GLP functions Fold-out stand for convenient hands-free measurements Transfer of measurement data to a computer or smartphone via USB or WiFi Measuring Case for Mobile Use All handheld meters of the WQ-300 series are supplied in a reinforced measuring case for mobile outdoor use. The case provides space for the measuring instrument, electrodes and cables, as well as up to eight 60 ml bottles of buffer solutions. An integrated holder for buffer solution bottles facilitates calibration. Automatic Sensor Recognition A particular advantage of the WQ-300 series is automatic sensor recognition through sensor cables with integrated digital sensor receptacles. Information about the sensor, calibration data and measurement settings is stored in the digital sensor module and transmitted to the measuring instrument. In addition, all connected sensors can be calibrated simultaneously, as each sensor module independently stores measurement and calibration data and transmits them to the WQ-300 series measuring instrument. Analogue sensors can optionally be connected using the HORIBA BNC sensor adapter. Please contact us for further information. Available Languages German English French Spanish Portuguese Chinese Scope of Delivery WQ-300 series handheld meter in a carrying case Selected digital electrode, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptacle Instruction manual Manufacturer Article Number WQ-320-K (2 channels): 3200832606 Calibrating the Instrument pH Measurement To obtain accurate results, a two-point calibration must be carried out. The following buffer solutions are recommended: pH 7.00 and 4.01 for acidic samples pH 7.00 and 10.01 for alkaline samples If the expected pH value of the sample is unknown, a three-point calibration using pH 7.00, 4.01 and 10.01 is recommended. It is recommended to begin calibration with pH 7.00. Conductivity Measurement For conductivity measurements, a single-point calibration is sufficient, for example at 1413 µS/cm. For greater accuracy, a multi-point calibration can also be performed. Important Note on the Chloride Sensor Note: If a chloride sensor is selected, it is supplied without chloride ionic strength adjuster and chloride electrode filling solution. These solutions must be purchased separately by the customer. The chloride sensor cannot be used without the required filling solution. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required.

Horiba WQ330-K – Your Professional 3-Channel Water Quality Meter Expandable multi-parameter system for simultaneous measurement of pH, conductivity, redox, and other water parameters The Horiba LAQUA WQ330-K is a powerful multi-channel device for advanced water analysis, both on-site and in the laboratory. With three freely configurable measurement channels, it can simultaneously record parameters such as pH, conductivity, redox potential, TDS, temperature, oxygen, ammonia, calcium, chloride, nitrate, fluoride, and potassium. Intuitive operation, automatic sensor recognition, and digital calibration ensure accurate, fast, and reproducible measurements. Flexible Multi-Parameter System for Field and Laboratory Applications The analysis kit with the Horiba WQ330-K is ideal for environmental and water body monitoring, research and teaching, as well as drinking and process water control. The large LCD display with LED backlight ensures excellent readability even in direct sunlight. Measurement data can be exported and documented via USB or wirelessly, greatly simplifying traceability and analysis. The modular system allows the device to be quickly and precisely adapted to any measurement task. It is ideal for users who need to efficiently and reliably monitor multiple water parameters. Technical Features and Key Advantages of the WQ330-K The three measurement channels of the Horiba WQ330-K enable simultaneous recording of different water parameters, reducing measurement time and allowing better evaluation of relationships between parameters. The modular sensor concept allows flexible use of digital sensors, which are automatically recognized and store their calibration history. Notably, the combination of high measurement precision, user-friendliness, and mobility makes this device stand out. Quick deployment without complicated setup, along with easy data transfer for documentation and analysis, makes the Horiba LAQUA WQ330-K an ideal solution for professional water analytics. Calibrating the instrument: pH measurement To obtain accurate results, a two-point calibration must be carried out. It is recommended that the following solutions be used: pH 7.00 and 4.01 for acidic samples pH 7.00 and 10.01 for alkaline samples Carry out a three-point calibration using pH 7.00, 4.01 and 10.01 if you do not know the expected pH value of the sample. It is recommended that you calibrate using pH 7.00 first. Conductivity measurement For a conductivity measurement, a single-point calibration is sufficient, for example at 1413 μS/cm. For greater accuracy, a multi-point calibration can also be carried out. Note: During the promotional period, the discount on accessories will be automatically deducted at the shop’s checkout when purchased together with the HORIBA WQ330 device. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required. Frequently asked questions How long is the warranty period for HORIBA analysers? The warranty period is 2 years for the 300 (WQ) series and 1 year for the F series after delivery. Where can I find suitable replacement electrodes or buffer solutions? You can find the appropriate replacement electrodes and buffer solutions in the shop under the main item at the bottom of the cross-selling section. How do I clean the probe before calibration? The sensors should be cleaned with DI water (deionised). After cleaning, wipe them with tissue paper if possible. Frequently asked questions about the promotion How long does the promotion run for? The promotion runs from 1 September 2026 to 31 December 2026. How do I get the discount on the accessories? The discount will be automatically deducted at the shop’s checkout when you purchase the HORIBA WQ330 unit at the same time.

Find out more about the accuracy of HORIBA’s pocket conductivity testers: your ideal choice for precise conductivity measurements. The EC-11, EC-22 and EC-33 models, manufactured in Japan, represent the pinnacle of quality in pocket testers. They offer numerous benefits for users in laboratories, industry, aquaculture, water treatment, schools and universities, as well as amateur gardeners. An overview of the HORIBA Conductivity Pocket Tester series: Model EC-11: Water resistance, micro-sample analysis from 0.12 ml and a conductivity measurement range of up to 19.99 mS/cm are the key features of these instruments. They are straightforward to use and maintain, ensuring long-term reliability. Model EC-22: Offers a larger temperature display and a wider measurement range. Perfect for advanced applications where the temperature of the medium must be determined for detailed analysis. Model EC-33: With the widest measurement range, TDS measurement capability and advanced features, this model sets new standards. For professionals who need to carry out the most precise measurements under varying conditions. Applications and benefits for the user: ‘Immersion’: Direct measurement is possible in solutions. For example, you can immerse the tester in a beaker and determine the value. ‘Scoop’: The hinged lid, which acts as a scoop here, allows you to easily take a sample from a hard-to-reach area. ‘Drops’: Efficient analysis of the smallest volumes. Thanks to their user-friendliness, durability and ‘Made in Japan’ quality, HORIBA pocket conductivity testers are a reliable solution for a variety of measurement applications. Manufacturer’s item number: 3999960126 LAQUAtwin EC-22: The world’s first pocket-sized conductivity meter Your mobile laboratory – for on-site use: Ideal for water quality testing in aquariums, foodstuffs and many other applications. HORIBAs unique compact analyser integrates the electrode, display and sample chamber to enable simple, effective on-site testing through direct measurement using a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity and temperature display Automatic range Automatic calibration Automatic standard recognition: 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm Automatic temperature compensation: 2%/°C fixed Temperature calibration: 5 to 40.0 °C Automatic stabilisation / automatic hold measurement Automatic switch-off: 30 mins Low battery indicator IP67 rating: dust and water resistant Replaceable sensor 400-hour battery life: continuous operation without backlight Materials: ABS-epoxy housing and titanium coating with platinum-black sensor Display: custom (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years – meter, 6 months – sensor Packaged in a handy carrying case Supplied with 1413 µS/cm & 12.88 mS/cm conductivity standards (14 ml each), conditioning solution (4 ml), 2 x CR2032 batteries, dropper, instructions and quick start guide Additional information We would like to inform you of an upcoming product update for the LAQUAtwin pocket-sized analysers. To enhance product safety and prevent accidental swallowing of the batteries by infants and young children, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for increased safety. Reason: To prevent accidental swallowing of batteries. Production date: from January 2026 in Japan Deliveries to EMEA distribution partners: from March 2026 As this change is currently being rolled out, you may receive mixed deliveries of the current and updated versions during the transition period. Please note: The EC4 replacement sensors, both old and new, are not compatible with each other. Similarly, the conditioning solutions for the old and new versions are not compatible with the respective device variants. How can you tell if you have an older or a new device? If your Pocket Tester is marked ‘4-cell’, you have the latest version of this device. In this case, you will need the replacement sensors listed in the cross-selling section, as well as the standard and conditioning solutions. These have been specially optimised for the new Pocket Testers and are not suitable for the older models.

HORIBA pH Handheld Tester – Ideal for Water and Environmental Analysis Precise pH measurements on-site – compact, reliable, and easy to use The Horiba LAQUAtwin pH tester is ideal for water quality testing in rivers, drinking water, and process water. With a measurement range of 0.0 to 14.0 pH and a 2-point calibration, the tester is suitable for a wide range of pH analyses. Just a single drop of sample provides quick and reliable measurement results. The tester combines electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital display with backlight shows both pH and mV values. Features such as automatic stability detection and Auto-Hold simplify operation. With up to 400 hours of battery life, the tester is suitable for extended measurement series. Included are calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a carrying case. Handheld pH tester for fast and precise results With its wide measurement range and 2-point calibration, the Horiba LAQUAtwin pH tester is suitable for a variety of pH analyses. Even a single drop of sample is enough to obtain fast and accurate results. Its compact design makes the mobile pH tester highly user-friendly and allows on-site measurements without complex sample preparation or laboratory infrastructure. Robust, waterproof design with comprehensive features The tester integrates the electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital backlit display clearly shows pH and mV values. Features like automatic stability detection and Auto-Hold simplify daily use. With a battery life of up to 400 hours, the tester is suitable for long measurement series. The package includes calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a practical carrying case. Typical applications of the Horiba LAQUAtwin pH Pocket Tester Aquaculture and corals Aquariums Beer, beverages, and food Heating systems Laboratories and schools Horticulture Water treatment Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Mobile pH Tester with 3-Point Calibration for On-the-Go Use Horiba LAQUAtwin pH Tester – ideal for water and environmental analysis The Horiba LAQUAtwin pH Tester pH-22 is compact, robust, and designed for mobile use. With up to three calibration points and a measurement range of 0.00 to 14.00 pH, this device delivers high precision and reliability. Direct measurement with just a single drop of sample provides fast results. Features such as automatic buffer recognition, temperature compensation, and Stabil/Hold functionality make daily operation simple and convenient. Mobile precision pH tester for reliable on-site measurements The tester combines electrode, display, and sample container in a dust- and waterproof IP67 housing, making it ideal for field and laboratory applications. The digital backlit display shows pH and mV values clearly and accurately. Automatic shut-off and battery status indicators ensure convenient operation. The package includes calibration buffer solutions (pH 4.01 and 7.00), batteries, a pipette, and a quick-start guide. Why accurate pH measurement is critical – and why a handheld tester is ideal pH is a key parameter in water, environmental, and process analysis because it significantly influences chemical reactions, biological processes, and material stability. Even small deviations can substantially impact water quality, product quality, or process safety. A mobile handheld pH tester allows fast, reliable measurements directly on site. Changes can be detected immediately, and corrective actions implemented without delay. The Horiba LAQUAtwin pH-22 combines this flexibility with high measurement precision, making it ideal for field, laboratory, and routine applications. Typical applications for the Horiba LAQUAtwin pH handheld tester Aquaculture and coral monitoring Beer, beverage, and food production Heating systems Laboratories and schools Environmental analysis Water treatment Horticulture Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Manufacturer Part No. 3999960124 LAQUAtwin PH-33: The world's first pocket-sized PH meter Your mobile laboratory - for use on site: Ideal for water quality testing in aquatic, drinking and process water and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.1 ml (0.05 ml with sampling sheet B) Up to 5 calibration points pH, mV and temperature display Automatic calibration Automatic buffer recognition: USA & NIST pH buffers Automatic temperature compensation Temperature calibration: 5 to 40.0 ºC Automatic stable / automatic hold measurement Automatic switch off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Material: ABS epoxy Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instructions and quick reference guide Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Note on Scope of Delivery: From November 2026, HORIBA products will be supplied without batteries. Existing stock may still include batteries. Batteries are no longer included with newly manufactured products and must be purchased separately if required.

Horiba Y046 Sampling Sheet B Contains 100 pcs. / boxuse for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract) for the latter, please use sampling sheet holder and cover the sensor during measurement for LAQUAtwin and Twin pocket meters, except conductivity and salt EC modelsManufacturer Part Nr. 3200053858

Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736

The MA888 is an potical instrument that employs the measurements of the refractive index to determine the % volume and freezing point of ethylene glycol based coolants of antifreeze.The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for use in the field to optimize your cooling system.The MA888 refractometer is an optical device that is simple and quick to use. Samples are measured after a simple user calibration with distilled or deionized water. Within seconds, the refractive index and temperature are measured and converted into one of two measurement units; % Volume or Freezing Point.The Instrument utilizes internationally recognized references for unit conversion and temperature compensation for ethylene glycol solutions (e.g. CRC Handbook of Chemistry and Physics, 87th Edition).The temperature (in °C or °F) is also displayed on the large dual level display along with helpful message codes.Key features:Dual-level LCDAutomatic Temperature Compensation (ATC)Easy setupBattery operation with Low Power indicator (BEPS)Automatically turns off after 3 minutes of non-use Frequently Asked Questions Can I check the antifreeze quickly? Yes, the device provides measurement results in less than 2 seconds. Does the device also display the freezing point? Yes, in addition to the ethylene glycol content, the freezing point is also displayed directly. How much sample do I need for a measurement? Just 2 to 3 drops are sufficient for a reliable analysis. Do I need to account for the sample temperature? No, the device automatically compensates for temperature fluctuations to ensure precise results. Is it complicated to operate? No, it is easily operated using just two buttons and is quick to learn. How much effort does cleaning require after measurement? The stainless steel measuring well and the prism can be cleaned quickly and easily. Why is a digital refractometer more practical than an optical model? Readings are displayed digitally, eliminating the need for estimation or difficult manual reading. Can I use the device in the field? Yes, its compact design makes it ideal for on-site use.

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

IP Protection: IP67 Manufacturer article number: 50014153

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67Manufacturer article number: 50014163

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014203

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014213

The XS Instruments Cond 7 Vio and 70 Vio multi-parameter hand-held measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time. The combined portable conductivity, total dissolved solids, salinity (70 Vio only) and temperature meter of the Vio series has an automatic, up to five-point, conductivity calibration for the most common conductivity calibration standards. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the measuring electrode, as well as our respective buffer solutions and the instructions. Complementary advantages of the 70 Vio version: GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unit Manufacturer article number: 50110512

The professional XS Instruments Oxy 7 Vio and 70 Vio portable oxygen multi-parameter meter with innovative high-resolution colour display is suitable for working in all conditions and like our other available Professional meters in the case, it offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This means that the user can also use the device easily and intuitively at any time.Both instruments has an automatic, up to two-point, oxygen calibration with an adjustable manual compensation factor of the salinity for the automatic temperature-compensated measurement of the temperature. You are assisted by intuitive symbols on the backlit screen, including display of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter measuring device is supplied in our professional measuring case, which contains the oxygen electrode, two replacement membranes, the instructions and, depending on the version, a 30 ml refill solution. Complementary advantages of the 70 Vio version:Optical oxygen sensor (higher accuracy in the lower measuring range)GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unitManufacturer article number: 50110202

The professional XS Instruments Oxy 7 Vio and 70 Vio portable oxygen multi-parameter meter with innovative high-resolution colour display is suitable for working in all conditions and like our other available Professional meters in the case, it offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This means that the user can also use the device easily and intuitively at any time.Both instruments has an automatic, up to two-point, oxygen calibration with an adjustable manual compensation factor of the salinity for the automatic temperature-compensated measurement of the temperature. You are assisted by intuitive symbols on the backlit screen, including display of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter measuring device is supplied in our professional measuring case, which contains the oxygen electrode, two replacement membranes, the instructions and, depending on the version, a 30 ml refill solution. Complementary advantages of the 70 Vio version:Optical oxygen sensor (higher accuracy in the lower measuring range)GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unit