Mobile Sodium Ion Tester from Horiba with Temperature Measurement – precise and robust High-precision sodium ion tester with 2-point calibration – ideal for water and environmental analysis The Horiba LAQUAtwin Na-11 sodium ion tester was specifically designed for accurate measurement of sodium concentrations in a wide range of samples. The device enables direct on-site measurements. Its clear display shows both the Na⁺ concentration and the sample temperature in a single step, making field, laboratory, and greenhouse work significantly more efficient. Mobile sodium ion tester for precise on-site measurements Featuring 2-point calibration and automatic standard recognition (150 and 2000 ppm), the instrument can be easily adapted to different measurement requirements. The integrated temperature display and automatic temperature compensation ensure accurate results even under fluctuating environmental conditions. The robust IP67 housing is dustproof and waterproof, making the tester suitable for demanding daily use. With a battery life of approximately 400 hours, reliable long-term operation is ensured. The tester is supplied with standard solutions, sampling sheets, batteries, and matching pipettes for immediate use. Why sodium measurement matters – and why a handheld tester is the ideal solution Measuring sodium ions plays a crucial role in water, environmental, food, and agricultural analysis. Excessively high or low sodium concentrations can significantly affect water quality, soil structure, plant growth, and the quality of food products and drinking water. Regulatory limits and quality standards further require regular monitoring. A mobile sodium ion handheld tester enables fast and precise analysis directly at the point of use, without time-consuming sampling or laboratory analysis. The Horiba LAQUAtwin Na-11 combines this flexibility with high measurement accuracy and ease of use, making it ideal for routine monitoring, quality control, and research applications. Typical applications for the Horiba sodium ion tester Environmental monitoring: Measurement of sodium concentrations in surface and groundwater to assess water quality and ensure compliance with environmental standards. Food and beverage production: Testing sodium levels in food and beverages for quality assurance, product development, and regulatory compliance. Agriculture: Monitoring sodium content in irrigation water and soils to support plant health and optimize water management. Research & development: Use in laboratories for experimental studies on sodium ion behavior under varying conditions. Education: Utilized in schools and universities to demonstrate the use of ion-selective electrodes in analytical chemistry. Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Horiba Y046 Sampling Sheet B Contains 100 pcs. / boxuse for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract) for the latter, please use sampling sheet holder and cover the sensor during measurement for LAQUAtwin and Twin pocket meters, except conductivity and salt EC modelsManufacturer Part Nr. 3200053858

Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736

Waterproof conductivity meter for low-range measurements, featuring automatic temperature compensation and a replaceable probe. Ideal for precise conductivity measurements in the laboratory, water analysis, and mobile applications. Milwaukee C65 Waterproof Low-Range Conductivity Meter The Milwaukee C65 is designed for the precise measurement of electrical conductivity in low-conductivity solutions. Its compact design and waterproof housing make the meter suitable for both laboratory applications and mobile use in humid or demanding environments. Integrated automatic temperature compensation (ATC) accounts for temperature fluctuations during measurement, ensuring reliable conductivity readings. This allows for convenient data collection even under changing environmental conditions. A key advantage of the Milwaukee C65 is its replaceable probe. In the event of wear or damage, there is no need to replace the entire unit, thereby reducing maintenance effort and ongoing costs. Additionally, manual 1-point calibration allows for easy verification and adjustment of measurement accuracy. Thanks to its light weight and compact dimensions, the device is easy to transport and ideal for users who need to perform conductivity measurements directly on-site. Technical Specifications Measurement parameter: Conductivity Measurement range: 0 to 1999 µS/cm Resolution: 1 µS/cm Accuracy: EC: ±2% of full scale Temperature compensation: Automatic 5 to 50 °C / 41 to 122 °F; β = 2 %/°C Your benefits at a glance For conductivity measurements in the low range Waterproof housing for demanding operating conditions Replaceable probe for extended service life Compact and lightweight design Suitable for laboratory and field use Typical applications Water analysis Laboratory applications Environmental testing Water treatment Education and research Frequently Asked Questions What do I need this meter for in everyday life? It measures the conductivity of liquids, e.g. in water treatment, laboratories or hydroponics. Is the device easy to use, even for beginners? Yes, it has a simple design and shows the reading directly on the display. Can I use the device in water? Yes, it is waterproof and can be submerged in liquids without any problems. What does automatic temperature compensation mean? The device automatically adjusts readings to the water temperature for more accurate results. Will I need to replace the electrode at some point? Yes, the electrode is replaceable and can be changed when necessary. For which applications is the meter particularly suitable? Ideal for aquariums, hydroponics, swimming pools and general water analysis.

Waterproof multifunction meter for measuring conductivity, TDS, and temperature. Features automatic temperature compensation, a replaceable probe, and simple calibration for various applications. Milwaukee EC59 Waterproof Conductivity, TDS, and Temperature Meter – Precision and reliability for all water quality monitoring applications. The Milwaukee EC59 combines conductivity (EC), TDS, and temperature measurements into a single, compact handheld device. By integrating multiple measurement parameters, it is ideal for users who need to assess water quality quickly and easily without carrying multiple instruments. Automatic temperature compensation ensures reliable readings even when temperatures fluctuate. Additionally, automatic 1-point calibration allows for easy setup and regular accuracy checks, making the meter suitable for both beginners and experienced users. A key advantage of the EC59 is its replaceable electrode. The electrode can be swapped out if it wears down or performance declines, thereby extending the device's service life. Its robust, waterproof housing makes it a reliable tool for use in laboratories, greenhouses, or directly in the field. By simultaneously measuring conductivity, TDS, and temperature, the Milwaukee EC59 is suitable for a wide range of water quality monitoring and control applications. Technical Specifications Measurement parameters: Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0 to 3999 µS/cm | 0 to 2000 ppm TDS | 0.0 to 60.0 °C (32.0 to 140.0 °F) Resolution: 1 µS/cm / 1 ppm / 0.1 °C / 0.1 °F Accuracy (EC/TDS/Temp.): 2% of full scale | +/-0.5 °C (+/-1 °F) Temperature compensation: Automatic Key benefits at a glance Measurement of conductivity, TDS, and temperature with a single device Waterproof housing for daily use Replaceable electrode for extended service life Compact and user-friendly design Ideal for portable and stationary measurements Typical applications Water treatment Aquaculture Hydroponics Laboratory applications Environmental analysis Frequently Asked Questions Can I use the device even if I have no prior knowledge? Yes, it is easy to use and the readings can be taken quickly. What can I actually measure with this tester? You can check the water quality based on conductivity, TDS value and temperature. Is the device suitable for outdoor use? Yes, the waterproof housing protects the device when used in damp environments. Will I need to replace the probe at some point? Yes, the probe is replaceable and can be replaced if necessary. How quickly do I get a measurement result? The measurement is taken within a few seconds of immersion in water. For which applications is the device particularly suitable? It is suitable for aquariums, hydroponics, swimming pools and many other water-related applications. Is the device compact enough for use on the go? Yes, thanks to its handy size, it fits easily into a bag or toolbox.

The Total Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW11 Total Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.Total Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW11 Tester

The MI527-25 IodinePowder reagent kit includes high-quality reagents that are ready-to-use with MW13. The MW34 meter and reagents use the DPD Method. The reaction between Iodineand the reagent causes a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.0 to 12.5 ppm (mg/L). Iodinepowder reagent replacement kit (25 tests) Pre-made reagents for precision and ease of use Marked with expiration date and lot number for traceability For use with the MW13 Tester

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization.Key features include:- User friendly- Small & Ergonomic case design- Inexpensive- Large and easy to read display- Good accuracy and immediate resultsAccessories:- Mi526-25 Powder reagents for free chlorophotometer (25 pieces) (item no. 895551)- MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555)- MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556)The handy photometers are supplied in a carton box with all accessories. Frequently asked questions How easy is the Milwaukee MW10 to use? Very easy – just add a water sample, press the button, and the result is displayed immediately. How accurately does the tester measure the chlorine level? The tester provides reliable and precise readings for everyday use, e.g. in swimming pool water. Do I need any additional accessories for the measurement? Yes, reagents are required, but they are easy to buy and simple to use. How long does a measurement take, roughly? You will usually get the result in less than a minute. Is the device suitable for beginners? Absolutely; even without prior knowledge, you’ll get the hang of it quickly. How often do I need to maintain or clean the tester? Only occasionally – simply rinse with clean water after use.

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - Mi524-25 Powder reagents for total chlorine photometer (25 pieces) (art. no. 895552) - MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories. Frequently asked questions What exactly does the Milwaukee MW11 measure? It measures the total chlorine level in the water, i.e. free and combined chlorine together. Is the tester suitable for my pool? Yes, it is ideal for swimming pools, hot tubs and also for testing tap water. How quickly do I get a reading? It usually takes only about 1 minute for the result to appear. Do I need to do a lot of setting up or preparation? No, it is simple to use and easy to understand. Do I need any extra accessories to use it? Yes, suitable reagents are required and can be easily reordered. How do I look after the device properly? Rinse it briefly after use, and it will remain reliable for a long time.

Iodine is used as disinfectant in various applications - one of the most common is the poultry industry waste water treatment. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - MI527-25 Powder reagents for iodine photometer (25 pieces) (item no. 895553) - MI0011 (10ml) glass cuvettes for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories. Frequently asked questions What exactly does the Milwaukee MW13 measure? It measures the iodine content in water quickly and reliably. Is it complicated to use? No, just add a water sample, add the reagent, press the button – that’s it. How quickly do I get a result? You’ll usually see the reading within a minute. Do I need anything else to take a measurement? Yes, suitable reagents are required and readily available. Can I use the tester even without any experience? Yes, it’s simple in design and easy to understand. How do I keep the tester in good working order for a long time? Clean it briefly after each use and store it in a dry place.

Portable conductivity meter for higher conductivity ranges with automatic temperature compensation. Milwaukee MW302 PRO portable conductivity meter for high measurement ranges The Milwaukee MW302 PRO is designed for conductivity measurements in applications involving elevated salt and nutrient concentrations. Thanks to its extended measurement range, the device is particularly well-suited for agriculture, hydroponics, and water treatment, as well as numerous other applications in laboratories and food production. Measuring electrical conductivity provides important information regarding the concentration of dissolved salts in a solution. In hydroponic systems, the MW302 PRO aids in monitoring nutrient solutions, allowing fertilizer concentrations to be controlled and adjusted as needed. Conductivity measurement is also useful in agriculture for assessing nutrient levels and irrigation solutions. For ease of use, the meter features automatic temperature compensation. This accounts for temperature fluctuations during measurement and improves the comparability of results. Its compact design allows for flexible use directly on-site. The MW302 PRO comes complete with a suitable conductivity probe and calibration solution, ensuring a quick and easy start to conductivity measurement. Technical Specifications Measurement parameter: EC (Electrical Conductivity) Measurement range: EC: 0.0 to 10.0 mS/cm Resolution: 0.1 mS/cm Accuracy: ±2% of full scale at 25°C Key Benefits at a Glance For conductivity measurements in higher ranges Automatic temperature compensation Compact and portable design Includes conductivity probe and calibration solution Long battery life for mobile applications Typical Applications Agriculture Hydroponics and soilless cultivation Greenhouse applications Water treatment Food production Water analysis Scope of Delivery Milwaukee MW302 PRO meter SE520 conductivity probe 1413 µS/cm calibration solution 9V battery User manual Frequently Asked Questions Which parameter does the MW302 PRO EC meter measure? The MW302 is a portable high-range (EC High) conductivity meter with automatic temperature compensation. Measurement parameter: EC (Electrical Conductivity) Measurement range: EC: 0.0 to 10.0 mS/cm For which types of water is this meter suitable? It is particularly suitable for water with higher concentrations of dissolved substances. Can I take measurements directly on-site? Yes, the device is portable and delivers quick results. Is it easy for beginners to use? Yes, operation is straightforward and easy to understand. How easy is it to read the values? The large display ensures a clear and easy-to-read readout. Do I have to wait long for the measurement result? No, the readings are displayed within a few seconds. Can I use the device regularly? Yes, it is suitable for frequent use in both daily life and professional settings. Why should I measure my water values myself? You gain immediate clarity and can react promptly if necessary. For which applications is the device suitable? This meter was developed for agricultural and hydroponic applications and is also ideally suited for use in the food industry, laboratories, and water treatment.

The portable 4-in-1 MW306 PRO conductivity/TDS/NaCl (salinity)/temperature meter has won many fans worldwide with its reliable fast and easy operation. It is also very rugged and has IP67 waterproof rating.   It has a user-friendly interface for data exchange and as mentioned at the beginning, it is designed to measure four different parameters of water.  Ideal for use in hydroponics, horticulture, laboratories, food processing, water treatment and many other applications with demanding measurement requirements.

MW401 is a portable TDS meter with automatic temperature compensation and low range.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.In water treatment, high TDS can affect the clarity and taste of drinking water.The MW401 has a measuring range of 0 to 1990 mg/L (ppm) with a resolution of 10 mg/L (ppm).This meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution. Frequently Asked Questions What can I use this tester for? Ideal for testing drinking water, aquariums, reverse osmosis systems and other water applications. How quickly do I get a reading? The result appears on the display within a few seconds. Is the device suitable for beginners? Yes, it is straightforward to use and requires no prior knowledge. Can I detect changes in water quality? Yes, regular measurements help to identify changes quickly. Do I have to calculate the values myself? No, the device displays the measurement directly and clearly. Is the meter suitable for regular checks? Yes, it has been designed for frequent and reliable measurements. Why should I use a digital meter? You get quick results and avoid inaccurate estimates or colour comparisons.

MW402 is a high range (TDS) portable conductivity meter with automatic temperature compensation.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.A high TDS value can affect the clarity and taste of drinking water.The MW402 has a measuring range of 0.0 to 10.0 g/L (ppt) with a resolution of 0.1 g/L (ppt).This TDS meter comes complete with conductivity probe with 1 meter (3.3') cable and a calibration solution. Frequently Asked Questions What types of water samples is this meter suitable for? Ideal for water with a higher mineral or salt content, as well as many technical applications. Can I check the water quality quickly? Yes, the meter provides an easy-to-read reading within a few seconds. Is the meter suitable for regular measurements? Yes, it has been designed for frequent use and reliable results. Do I need experience with this type of equipment? No, it is easy to use and well suited even for beginners. Can I use the device in different locations? Yes, thanks to its compact design, it is easy to transport. How can I detect changes in the water? Regular measurements allow deviations to be identified quickly. Why is a digital measuring device worth it? You get quick results and avoid inaccurate estimates or comparisons.

The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost.DESIGN FEATURESFast, easy-to-read results with large digital LCD readoutRepeatable, accuracy to ±1.5% FSLightweight and portableSimple 2 point open air calibrationUses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor5x o-rings, membranes and one protective cap included3m probe cable for extra flexibility when testing70 hours of battery life with continuous use (battery included) with low battery warning

The Milwaukee MW605 MAX Galvanic Portable Waterproof Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.The Milwaukee MW605 MAX DO Meter is preferred by people looking for lab level accuracy without the cost.The Milwaukee DO Meter is popular with everyone from field biologists, educators, fish farmers, water treatement plants and labs.DESIGN FEATURESFast, easy-to-read results with large digital LCD readoutGalvanic probe means no conditioning timeRepeatable, accuracy to ±1.5% of readingWater Proof IP 67 ratedLightweight and portableSimple 1 or 2 % saturation calibration points at 100% (water saturated air) and 0% (zero oxygen solution)Dedicated GLP key to store and recall data on system statusAvailable log space for up to 1000 recordsLogged data export via USB cableAltitude and Salinity compensationAutomatic temperature compensation °F & °CUses MA860 (included) reinforced Galvanic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor2x O-rings, membranes and one protective cap included3m probe cable for extra flexibility when testing3 x 1.5 volt akaline AA battery (battery included) approx. 200 hours of battery life with continuous use with low battery warning

Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature, featuring automatic temperature compensation (ATC) and a replaceable electrode. The Milwaukee MW803 was specifically designed for applications in the low conductivity range. Milwaukee MW803 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW803 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into one compact unit, the meter is ideal for users who need to monitor water quality quickly and reliably without relying on multiple separate devices. The MW803 was specifically developed for low-conductivity applications. This makes the device particularly suitable for hydroponics, drinking water analysis, aquarium maintenance, and other applications involving low salt and mineral concentrations. Simultaneous measurement of multiple parameters simplifies water quality assessment and supports efficient monitoring of water and nutrient solutions. To ensure precise results, the meter features automatic temperature compensation (ATC). Temperature-related fluctuations are automatically accounted for during conductivity and TDS measurements, ensuring reliable readings even under changing environmental conditions. Additionally, the integrated temperature sensor allows for direct monitoring of the sample temperature. Another advantage of the Milwaukee MW803 is its replaceable electrode. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire meter. This reduces long-term costs and significantly extends the device's service life. Automatic calibration ensures simple and convenient setup. One- or two-point calibration options are available for pH measurements, while conductivity measurement utilizes automatic single-point calibration. This allows the device to be quickly adapted to various measurement requirements. The waterproof housing protects the meter during use in damp environments, making the MW803 a reliable solution for both mobile and stationary applications. Its robust construction and ease of use make the device an attractive choice for both professional users and demanding hobbyists. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0 to 3999 µS/cm | 0 to 2000 ppm (mg/L) TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Resolution: 0.01 pH | 1 µS/cm | 1 ppm | 0.1 °C (0.1 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale | ±0.5 °C (±1 °F) Calibration: Automatic Temperature compensation: Automatic (ATC) Key Benefits at a Glance Simultaneous measurement of pH, conductivity, TDS, and temperature Specially designed for low-conductivity applications Automatic temperature compensation Automatic calibration functions Reliable monitoring of multiple water parameters with a single device Typical Applications Drinking water analysis Aquariums Water treatment Laboratory applications Nutrient solutions General water analysis Scope of Delivery Milwaukee MW803 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with this device? Yes, you can measure pH, conductivity, TDS, and temperature with a single device. Is the meter suitable for aquariums and ponds? Yes, it helps you quickly check key water parameters and detect changes early on. Can I replace the probe if it wears out? Yes, the pH probe is replaceable, allowing you to continue using the device for a long time. Is the device suitable for outdoor use? Yes, the housing is waterproof and designed for both humid environments and outdoor use. Do I need to account for temperature myself when taking measurements? No, the device automatically compensates for temperature fluctuations to ensure reliable results. Is it easy for beginners to use? Yes, the measurement process is straightforward, and the readings are displayed directly on the screen. What applications is this meter best suited for? It is ideal for hydroponics, aquariums, pools, drinking water testing, and many other water analysis applications.

Waterproof pH meter with a replaceable double-junction electrode for precise pH measurements in laboratories, aquariums, water analysis, and other applications. The Milwaukee PH54 stands out due to its fine measurement resolution, ease of use, flexible one- or two-point calibration, and long battery life. Milwaukee PH54 waterproof pH meter with replaceable probe The Milwaukee PH54 is a compact, waterproof pH meter designed for precise pH measurements across a wide range of applications. Compared to the Milwaukee PH51, the PH54 offers finer measurement resolution, making it ideal for users who require more detailed pH readings. Thanks to its robust design and user-friendly operation, the device is suitable for both portable use and routine spot checks. A key advantage of the PH54 is its replaceable pH electrode. This allows the probe to be swapped out when worn, eliminating the need to replace the entire meter. This reduces maintenance costs and extends the device's service life. The integrated double-junction electrode ensures reliable, stable performance, even with frequent use. To ensure optimal performance across various measurement tasks, the device features manual one- or two-point calibration. The clear display allows for quick reading of measurements and ensures convenient operation during daily use. The waterproof housing protects the device when working in damp environments, making it a reliable solution for diverse applications. Additionally, the long battery life ensures the device is always ready for use and supports cost-effective operation over many hours of measurement. Technical Specifications: (h3) Technical Specifications: Measurement parameter: pH Measurement range: 0.00 to 14.00 pH Resolution: 0.01 pH Accuracy: ±0.1 pH Calibration: Manual, 1- or 2-point calibration Advantages Water-resistant housing Higher measurement resolution than the Milwaukee PH51 Replaceable pH electrode Manual one- or two-point calibration Compact and handy design Long battery life Typical Applications Aquaristics Water analysis Horticulture Environmental analysis General pH monitoring Scope of delivery Milwaukee PH54 pH meter Batteries User manual Frequently Asked Questions Is the pH54 suitable for outdoor use in all weather conditions? Yes, the device is waterproof and operates reliably outdoors. Does the device also display the water temperature? Yes, the pH value and temperature are displayed simultaneously on the screen. How accurate are the readings in everyday use? The measurement is highly precise, with an accuracy of ±0.1 pH. Do I need to recalibrate the device frequently? For best results, we recommend calibrating before each measurement or doing so regularly. Can I replace the probe if it stops measuring accurately? Yes, the electrode is replaceable, which significantly extends the device's service life. Is the device easy for beginners to use? Yes, it is simple to operate, and calibration is quick to perform. For which applications is this pH meter particularly useful? It is ideal for aquariums, plant cultivation, pools, laboratories, and water analysis.

Waterproof pH and temperature meter with automatic temperature compensation and a replaceable electrode. The Milwaukee PH55 enables simultaneous measurement of pH and temperature and offers automatic one- or two-point calibration. Milwaukee PH55 waterproof pH and temperature meter with automatic temperature compensation and replaceable probe The Milwaukee PH55 is a compact, waterproof meter designed for the simultaneous determination of pH and temperature. By combining these two measurement parameters, the device is ideal for applications requiring reliable water quality monitoring. Its robust design and ease of use make the PH55 a practical solution for both portable use and routine measurements in laboratory or technical environments. A key advantage of the Milwaukee PH55 is its integrated automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during measurement, ensuring greater accuracy and reliable pH results, even under changing conditions. The replaceable electrode ensures cost-effective, long-term use of the meter. The probe can be replaced when worn without needing to discard the entire unit, thereby reducing maintenance costs and extending the device's service life. For user convenience, the PH55 features automatic one- or two-point calibration. It supports various international buffer standards, allowing for flexible use across a wide range of applications. Simultaneous display of pH and temperature further simplifies the monitoring and evaluation of measurements. The waterproof housing protects the meter during operation in damp environments, ensuring reliable performance under demanding conditions. Combined with its simple calibration and integrated temperature measurement, the Milwaukee PH55 is suitable for both private and professional users. Technical Specifications Measurement parameters: pH | Temperature Measurement range: -2.0 to 16.0 pH | -5.0 to 60.0 °C pH range: -2.0 – 16.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Automatic 1- or 2-point calibration with two sets of preset buffer solutions (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Benefits of the PH55 Simultaneous measurement of pH and temperature Waterproof housing Replaceable electrode Automatic one- or two-point calibration Support for various buffer standards Compact and handy design Typical Applications Aquaristics Water analysis Environmental monitoring Laboratory applications Water treatment Scope of Delivery Milwaukee PH55 pH and temperature meter Batteries User manual Frequently Asked Questions Can I read the pH value and temperature at the same time? Yes, both values are clearly displayed simultaneously. Is the device suitable for cold or warm water samples? Yes, it provides reliable measurements across a wide temperature range of -5 to 60°C. How quickly do I get a stable reading? The probe responds quickly and displays stable readings after a short time. Can I replace the probe myself if it wears out? Yes, the electrode can be easily replaced by unscrewing it. Does the device really float if it falls into the water? Yes, it floats on the water's surface and does not sink. Do I need to calibrate the device regularly? Yes, simple automatic 1- or 2-point calibration ensures accuracy. Is the device easy for beginners to use? Yes, operation is simple and very intuitive thanks to the use of icons.

Waterproof meter for the simultaneous measurement of pH, redox potential, and temperature. The Milwaukee PH58 features automatic temperature compensation and a replaceable electrode. Milwaukee PH58 waterproof pH, redox, and temperature meter with automatic temperature compensation and replaceable electrode The Milwaukee PH58 is a versatile meter for the simultaneous determination of pH, redox potential (ORP), and temperature. By combining these three key parameters, the device is ideally suited for applications requiring a comprehensive assessment of water quality. Whether in aquaculture, water treatment, environmental analysis, or the laboratory, the PH58 enables reliable and convenient monitoring of various readings using a single device. A key advantage of the Milwaukee PH58 is its redox measurement capability. In addition to pH and temperature, it measures the oxidation-reduction potential of a solution. This provides users with a more complete picture of water quality, allowing for better monitoring and documentation of critical processes. To ensure precise results, the device features automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during pH measurement, ensuring stable and reliable readings. The integrated temperature sensor also allows for direct monitoring of the sample temperature. The replaceable electrode ensures a long service life for the meter. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire unit. This significantly reduces ongoing costs and simplifies maintenance. pH calibration is performed automatically via a one- or two-point process using standard buffer solutions. The redox sensor comes factory-calibrated and is ready for immediate use, enabling quick setup and reducing the workload for the user. The waterproof housing protects the device during work in damp environments, making the PH58 a reliable solution for both mobile and stationary use. Its robust design, ease of use, and versatile measurement capabilities make this model an ideal companion for professional users and demanding measurement tasks. Technical Specifications Measurement parameters: pH | ORP (Redox) | Temperature Measurement range: -2.00 to 16.00 pH | ±1000 mV ORP | -5.0 to 60.0 °C (23 to 140 °F) Resolution: 0.01 pH | 1 mV | 0.1 °C (0.1 °F) Accuracy: ±0.05 pH | ±2 mV | ±0.5 °C (1 °F) Calibration: Automatic 1- or 2-point calibration with two sets of preset buffers (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Key Benefits at a Glance Simultaneous measurement of pH, ORP, and temperature Integrated ORP measurement for advanced water analysis Automatic one- or two-point calibration for pH measurements Factory-calibrated ORP measurement High measurement accuracy and fine resolution Suitable for mobile and stationary applications Typical Applications Aquaculture Aquarium hobby Water treatment Environmental monitoring Laboratory applications Process water monitoring Scope of Delivery Milwaukee PH58 pH, ORP, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with the PH58? Yes, the device measures pH, temperature, and redox levels in a single operation. Is the meter suitable for use in pools or ponds? Yes, it is ideal for pools, ponds, aquariums, and other water applications. What happens if the device falls into the water? No problem—the PH58 is waterproof and floats. Do I need to replace the probe if the readings become less accurate? Yes, the probe can be easily replaced without having to buy a new device. Does the device provide accurate readings at varying temperatures? Yes, automatic temperature compensation adjusts for temperature fluctuations. Is calibration complicated or time-consuming? No, calibration is simple and can be completed in just a few steps. Is the PH58 suitable for beginners? Yes, the device is easy to use and displays readings clearly.

Waterproof TDS meter for measuring dissolved solids in the low range. The Milwaukee T75 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T75 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T75 is a compact, waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Specifically developed for low-range measurements, this tester is ideal for applications requiring reliable water quality monitoring. Automatic temperature compensation (ATC) ensures that temperature fluctuations during measurement are automatically accounted for, delivering consistent results even under changing environmental conditions. This is particularly advantageous for applications such as water treatment, aquarium maintenance, and routine water testing. Another key feature of the Milwaukee T75 is its replaceable probe. Should the electrode wear out or performance decline, it can be replaced individually without the need to discard the entire unit, thereby extending the device's service life and reducing maintenance costs. Manual single-point calibration allows for easy adjustment of the device to specific measurement requirements. Its compact design ensures a comfortable grip, making it suitable for both portable use and regular operation in laboratories or technical facilities. The waterproof housing protects the device during use in damp environments, ensuring reliable operation across a wide range of conditions. Combined with ease of use and precise measurement technology, the Milwaukee T75 offers a practical solution for monitoring TDS levels. Technical Data Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 1999 ppm (mg/L) Resolution: 1 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Specifically designed for low-range TDS measurements Replaceable probe Compact and portable design Reliable monitoring of total dissolved solids Suitable for mobile and stationary applications Typical Applications Aquaristics Water treatment Drinking water monitoring Environmental analysis Water quality monitoring General TDS measurements Scope of Delivery Milwaukee T75 TDS meter Batteries User manual Frequently Asked Questions Is this meter suitable for drinking water? Yes, it is ideal for quickly testing drinking water and other water samples. Can I check the water quality myself? Yes, the meter displays a reading directly on the screen in just a few seconds. How does a TDS meter benefit me in everyday life? You can quickly tell if the composition of your water has changed. Is the device also suitable for aquariums or reverse osmosis systems? Yes, many users employ it to monitor aquarium and filtered water. Do I need to take special care of the device after each use? No, it is usually sufficient to rinse the measuring tip briefly after use. Can the device get wet? Yes, the casing is waterproof and designed for use around water. Is it complicated to use? No, the device is easy to use and is also suitable for beginners.

Waterproof TDS meter for measuring dissolved solids in the high range. The Milwaukee T76 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T76 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T76 is a waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Unlike meters designed for lower TDS ranges, the T76 is particularly well-suited for applications involving higher concentrations of dissolved substances, offering reliable water quality monitoring in demanding environments. Automatic temperature compensation (ATC) automatically adjusts for temperature-related fluctuations during measurement. This ensures consistent and reliable results, even amidst changing ambient conditions or varying sample temperatures. A key advantage of the Milwaukee T76 is its replaceable probe. If the sensor wears out or performance declines, the electrode can be replaced without needing to discard the entire unit. This significantly reduces maintenance costs and extends the device's service life. Manual single-point calibration allows for easy adjustment to specific measurement requirements. Its compact design ensures a comfortable grip, making the device suitable for both portable use and regular operation in technical facilities or laboratory settings. The waterproof housing protects the meter during use in damp environments, ensuring reliable operation under challenging conditions. Ease of use and robust construction make the Milwaukee T76 a practical solution for users who need to precisely monitor higher TDS levels. Technical Specifications Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 9990 ppm (mg/L) Resolution: 10 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Waterproof housing Suitable for high-range TDS measurements Replaceable probe Rugged design for demanding operating conditions Typical Applications Water treatment Process water monitoring Aquariums Environmental analysis Laboratory applications Scope of Delivery Milwaukee T76 TDS meter Batteries User manual Frequently Asked Questions Can I quickly see if my water is clean enough using this device? Yes, it displays the amount of dissolved substances in the water directly. Is the meter suitable for pools and aquariums as well? Yes, it is ideal for aquariums, pools, water treatment, and similar applications. Do I need to worry about inaccurate readings due to temperature fluctuations? No, automatic temperature compensation ensures stable results. How often do I need to calibrate the device? A simple 1-point calibration—performed occasionally depending on usage—is sufficient. What happens if the probe gets dirty over time? It can be easily cleaned or replaced if necessary. Can I use the device outdoors? Yes, it is waterproof and suitable for outdoor use. Is the device easy to use, even without prior experience? Yes—simply dip it in, read the result, and you're done; it’s very straightforward.

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)