Horiba 7544 DO Electrode TipReplacement DO Electrode Tip for 9521-10D Comes with detachable stirrer holderTo be used with 9521-10D Galvanic DO ElectrodeCompatible with stirrer setManufacturer article number: 3200891724

Horiba 7544-Stirrer Stirrer with holder for 9521-10D (works in combination with magnetic stirrer) Manufacturer article number: 3200897227

Manufacturer's number: 3200697411Chloride (Cl-) replacement electrode tip for 6560S-10C

Manufacturer's number: 3200693606Fluoride (Fl-) replacement electrode tip for 6561S-10C

Manufacturer's Number: 3200697412 Nitrate (NO3-) replacement electrode tip for 6581S-10C

Manufacturer's Number: 3200697413Potassium (K+) replacement electrode tip for 6582S-10C

Manufacturer's number: 3200697414Calcium (Ca2+) replacement electrode tip for 6583S-10C

Manufacturer number: 3014046710The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofCombined electrode

Manufacturer number: 3200922105The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofNot refillableCombined electrode

Stainless made Conductivity cell is now available!This conductivity cell is tough to shock and the best choise to measure Organic Solvent as well as Ultra pure water sample by employing the stainless material for its body. Low conductivity measurements (0.01~500 µS/cm) with BNC connector.This cell can be connected with the meters which equip BNC connector e.g. 200/F-70/1500/2000 series.Flow cell is available. Manufacturer article number: 3200878882 (9371-10D)

Manufacturer's number: 3014046709For general use Plastic housing, titanium/platinum black, k=1, conductivity cell with integrated temperature sensorWaterproofunder water measurements up to a depth of 1 meter

The Horiba 9383-10D conductivity electrode is a robust, waterproof electrode for measuring electrical conductivity (1 µS/cm to 100 mS/cm) and temperature (0–80 °C), designed for universal use in the laboratory and in the field. It features a plastic housing, a titanium measuring cell with platinum-black coating (k=1.0), an integrated temperature sensor and standard BNC and phono connectors (including 1 m cable). It is specifically compatible with handheld measuring devices from the LAQUA 200 series, such as the EC210 or EC220. Manufacturer item number: 3200780927

Manufacturer number: 3200611623This glass-body, refillable pH electrode is recommended for a wide range of applications, including pH buffers and aqueous test solutions.Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200611627This glass-body, refillable pH electrode can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200611625This plastic-body, refillable pH electrode is recommended for general-purpose use.

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body. Electrode: 251mm length, 7mm diameterConstructed with responsive glass that is 10x stronger than JIS standardsWaterproof, Pb-free glass Manufacturer article number:3200611628 (9480-10C)

This glass-body, refillable pH electrode gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints). The liquid junction is designed with a movable sleeve that prevents clogging. Easy to clean and provides quick stable readingsWaterproof, Pb-free glass Manufacturer article number:3200611631 (9481-10C)

Horiba 9521-10D DO ElectrodeGalvanic DO Electrode for DO and BOD measurements in laboratories Ideal for laboratory useIntegrated with built-in temperature sensorComes with replaceable 7544 DO Electrode Tip, detachable BOD bottle adapter and stirrer Use magnetic stir plate during measurementWaterproof Dissolved Oxygen Range: 0 to 20.00 mg/LTemperature Range: 0 to 50 °CResponse Time: 20 seconds (90% response time at constant temperature)Connectors: BNC, phono jackCable Length: 1 mOverall Length: 183 mmDiameter: 15.6 mmReplacement DO Tip: 7544Manufacturer article number: 3200891722

The Horiba 9552-20D sensor with a 2 m cable length combines robust construction, fast response time and easy maintenance in a waterproof sensor for precise measurements in outdoor use – ideal for the professional requirements of the LAQUA 200 series. The probe reaches 90% of its final value within just 30 seconds at a stable temperature. It is equipped with replaceable DO measuring tips of type 5402, which allows for easy maintenance without having to replace the entire sensor. Thanks to the galvanic measuring method, there is no warm-up time and no external power supply is required, while the integrated electrolytic gel solution ensures a long service life. The Horiba 9552-20D sensor combines robust construction, fast response time and easy maintenance in a waterproof sensor for precise measurements in outdoor use – ideal for the professional requirements of the LAQUA 200 series. Manufacturer item number: 3200780939

The Horiba 9552-50D galvanic DO probe is a waterproof galvanic sensor designed for outdoor use with an integrated temperature sensor and 5 m connection cable – ideally compatible with handheld measuring devices from the LAQUA 200 series. The probe can achieve a 90% response within 30 seconds at a constant temperature. The probe uses replaceable DO measuring tips of type 5402, which allow practical maintenance without replacing the entire sensor. The use of a galvanic measuring method avoids additional warm-up times or external power supply and offers a long-lasting electrolytic gel solution.Manufacturer item number: 3200780941

The Horiba 9600-10D PUREIL pH electrode can perform pH measurements in water within five minutes without affecting its conductivity thanks to its gel ion liquid salt bridge. This pH electrode allows pH values in water with low conductivity to be measured accurately and quickly. An innovative pH electrode that does not release KCl Accurate readings through quick and easy measurement This pH electrode is used to determine pH values in water in order to reliably determine pH values. It supports measurements in the pH range 0-14 and is ideal for water with low conductivity (<100 µS/cm) such as ultrapure water samples (e.g., distilled water, rainwater, reverse osmosis water, and boiler water). KCl is usually diffused in pH electrodes, but the use of a newly developed ionic liquid salt bridge now makes it possible to stabilize the potential difference at the liquid interface. When measuring with the 9600-10D PUREIL pH electrode, no potassium chloride is released that could influence the measurement or the pH value in samples with low ionic strength or special solutions. Advantages: Maintenance-free and waterproof Built-in temperature sensor for automatic temperature compensation Minimal dissolution of the ionic liquid during the measurement process Precise and fast measurement even with samples with low electrical conductivity The impact on the sample is a maximum of 1/10,000 compared to conventional methods Measurements are also possible with samples that react with KCl Waterproof construction Suitable for: Can be used for water with low electrical conductivity (pure water, rainwater, river water) and medical solutions (injections). Solutions that react with KCl (potassium chloride) or contain ions, such as injection solutions. Not suitable for: Since the Pure IL pH electrode uses an ionic liquid as a salt bridge as a reference electrode, it is not suitable for measuring samples containing surfactants, heavy metal ions, or organic solvents. For acidic samples, citrate buffer (pH 3.776 at 25 °C) is recommended for calibration instead of phthalate buffer (pH 4.01 at 25 °C) in order to achieve a more accurate measurement. Why should I use this electrode? The 9600-10D PUREIL is a very good and stable pH electrode. If you value speed and accuracy, this electrode is the right choice. Choose the winner of the 2012 Super Monozukuri Parts Award in the “Healthcare and Medical Equipment Parts” category.

Manufacturer Part Number: 3200585428This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.  Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200585447This refillable glass-body pH electrode with temperature sensor can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.