Horiba 7544-Stirrer Stirrer with holder for 9521-10D (works in combination with magnetic stirrer) Manufacturer article number: 3200897227

Manufacturer's number: 3200697411Chloride (Cl-) replacement electrode tip for 6560S-10C

Manufacturer's number: 3200693606Fluoride (Fl-) replacement electrode tip for 6561S-10C

Manufacturer's Number: 3200697412 Nitrate (NO3-) replacement electrode tip for 6581S-10C

Manufacturer's Number: 3200697413Potassium (K+) replacement electrode tip for 6582S-10C

Manufacturer's number: 3200697414Calcium (Ca2+) replacement electrode tip for 6583S-10C

Manufacturer number: 3014046710The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofCombined electrode

Manufacturer number: 3200922105The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofNot refillableCombined electrode

Stainless made Conductivity cell is now available!This conductivity cell is tough to shock and the best choise to measure Organic Solvent as well as Ultra pure water sample by employing the stainless material for its body. Low conductivity measurements (0.01~500 µS/cm) with BNC connector.This cell can be connected with the meters which equip BNC connector e.g. 200/F-70/1500/2000 series.Flow cell is available. Manufacturer article number: 3200878882 (9371-10D)

Manufacturer's number: 3014046709For general use Plastic housing, titanium/platinum black, k=1, conductivity cell with integrated temperature sensorWaterproofunder water measurements up to a depth of 1 meter

Manufacturer number: 3200611623This glass-body, refillable pH electrode is recommended for a wide range of applications, including pH buffers and aqueous test solutions.Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200611627This glass-body, refillable pH electrode can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200611625This plastic-body, refillable pH electrode is recommended for general-purpose use.

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body. Electrode: 251mm length, 7mm diameterConstructed with responsive glass that is 10x stronger than JIS standardsWaterproof, Pb-free glass Manufacturer article number:3200611628 (9480-10C)

This glass-body, refillable pH electrode gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints). The liquid junction is designed with a movable sleeve that prevents clogging. Easy to clean and provides quick stable readingsWaterproof, Pb-free glass Manufacturer article number:3200611631 (9481-10C)

Horiba 9521-10D DO ElectrodeGalvanic DO Electrode for DO and BOD measurements in laboratories Ideal for laboratory useIntegrated with built-in temperature sensorComes with replaceable 7544 DO Electrode Tip, detachable BOD bottle adapter and stirrer Use magnetic stir plate during measurementWaterproof Dissolved Oxygen Range: 0 to 20.00 mg/LTemperature Range: 0 to 50 °CResponse Time: 20 seconds (90% response time at constant temperature)Connectors: BNC, phono jackCable Length: 1 mOverall Length: 183 mmDiameter: 15.6 mmReplacement DO Tip: 7544Manufacturer article number: 3200891722

The Horiba 9600-10D PUREIL pH electrode can perform pH measurements in water within five minutes without affecting its conductivity thanks to its gel ion liquid salt bridge. This pH electrode allows pH values in water with low conductivity to be measured accurately and quickly. An innovative pH electrode that does not release KCl Accurate readings through quick and easy measurement This pH electrode is used to determine pH values in water in order to reliably determine pH values. It supports measurements in the pH range 0-14 and is ideal for water with low conductivity (<100 µS/cm) such as ultrapure water samples (e.g., distilled water, rainwater, reverse osmosis water, and boiler water). KCl is usually diffused in pH electrodes, but the use of a newly developed ionic liquid salt bridge now makes it possible to stabilize the potential difference at the liquid interface. When measuring with the 9600-10D PUREIL pH electrode, no potassium chloride is released that could influence the measurement or the pH value in samples with low ionic strength or special solutions. Advantages: Maintenance-free and waterproof Built-in temperature sensor for automatic temperature compensation Minimal dissolution of the ionic liquid during the measurement process Precise and fast measurement even with samples with low electrical conductivity The impact on the sample is a maximum of 1/10,000 compared to conventional methods Measurements are also possible with samples that react with KCl Waterproof construction Suitable for: Can be used for water with low electrical conductivity (pure water, rainwater, river water) and medical solutions (injections). Solutions that react with KCl (potassium chloride) or contain ions, such as injection solutions. Not suitable for: Since the Pure IL pH electrode uses an ionic liquid as a salt bridge as a reference electrode, it is not suitable for measuring samples containing surfactants, heavy metal ions, or organic solvents. For acidic samples, citrate buffer (pH 3.776 at 25 °C) is recommended for calibration instead of phthalate buffer (pH 4.01 at 25 °C) in order to achieve a more accurate measurement. Why should I use this electrode? The 9600-10D PUREIL is a very good and stable pH electrode. If you value speed and accuracy, this electrode is the right choice. Choose the winner of the 2012 Super Monozukuri Parts Award in the “Healthcare and Medical Equipment Parts” category.

Manufacturer Part Number: 3200585428This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.  Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200585447This refillable glass-body pH electrode with temperature sensor can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.

This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use. Cable length: 2 metres Manufacturer article number: 3200393025 (9625-20D)

Manufacturer number: 320052411This plastic-body, refillable pH electrode with integrated temperature sensor can measure 1% hydrofluoric acid solution (at 25°C, immersed for 1min) for about 1000X. Suitable for drain water measurement after etching process.

This plastic-body, refillable pH electrode with integrated temperature sensor has higher resistance and longer stability than conventional electrodes. The alkali-resistant glass membrane is suitable for strong alkali samples such as plating solutions. Manufacturer article number: 3200524120 (9632-10D)

This plastic-body, gel-filled pH electrode with integrated temperature sensor is ideal for field testing. The body is durable and no need to refill the electrode. Manufacturer article number:3200642020 (9651-10D)