To ensure proper commissioning as well as highly accurate measurement, the use of calibration solutions is essential. Regular calibration ensures that the medium to be monitored is measured reliably. The frequency depends in particular on the operating conditions and the respective process requirements. Proper calibration can compensate for changes in the probe over time, which can be caused by minor damage or contamination, for example.
When selecting a probe, it is important to ensure that:
- The solution selected matches the measuring range of the instrument used.
- The solution used best matches the range in which measurements are to be made.
- In the case of a multi-point calibration, make sure that calibration solutions are used whose values are above and below the required measuring range.
All solutions offered are traceable to the certified international standard SRM NIST.
Box of 25x20ml sachets Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Including:230ml bottle MA9007 pH 7.01 calibration buffer solution230ml bottle MA9061 1413 µS/cm conductivity calibration solution230ml bottle MA9015 storage solution230ml bottle MA9016 cleaning solution
Including:230ml bottle MA9004 pH 4.01 Calibration Buffer Solution230ml bottle MA9007 pH 7.01 Calibration Buffer Solution230ml bottle MA9015 Storage Solution230ml bottle MA9016 Cleaning Solution Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Die MA9071 Elektrolytlösung ist speziell für gelöste-Sauerstoff-Sonden konzipiert. Sie sorgt für eine zuverlässige Funktion und exakte Messergebnisse.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Die M10016B Reinigungslösung von Milwaukee sorgt für eine gründliche Pflege von Elektroden. Jeder Beutel enthält 20 ml und bietet eine hygienische, frische Anwendung, um die Lebensdauer und Genauigkeit der Messgeräte zu erhalten.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Die M10032B ist eine präzise TDS-Kalibrierlösung (1382 ppm) im Einwegbeutel. Perfekt für portable und Laborgeräte, wenn eine schnelle und saubere Kalibrierung erforderlich ist. Häufige Fragen Wofür brauche ich eine Puffer- oder Kalibrierlösung? Damit stellen Sie Ihr Messgerät richtig ein und sorgen für verlässliche Messwerte. Wie oft sollte ich mein Messgerät kalibrieren? Das hängt von der Nutzung ab. Bei häufiger Nutzung empfiehlt sich eine regelmäßige Kalibrierung. Passt die Milwaukee Kalibrierlösung auch zu anderen Messgeräten? In vielen Fällen ja, wenn der gleiche Messbereich verwendet wird. Kann ich eine geöffnete Lösung mehrfach verwenden? Ja, solange sie sauber bleibt und korrekt gelagert wird. Wie lagere ich Puffer- und Kalibrierlösungen richtig? Am besten kühl, trocken und gut verschlossen lagern. Woran erkenne ich, dass ich neu kalibrieren sollte? Wenn Messwerte ungewöhnlich wirken oder diese sich deutlich verändern.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
Frequently Asked Questions Why do I need a buffer or calibration solution? It allows you to set up your measuring device correctly and ensures reliable readings. How often should I calibrate my measuring device? That depends on how often you use it. If used frequently, regular calibration is recommended. Is the Milwaukee calibration solution also suitable for other measuring devices? In many cases, yes, provided the same measurement range is used. Can I use an opened solution more than once? Yes, as long as it remains clean and is stored correctly. How do I store buffer and calibration solutions correctly? It is best to store them in a cool, dry place and keep them tightly sealed. How do I know when I should recalibrate? If the readings seem unusual or change significantly.
The Free Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW10 Free Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 2.50 ppm free chlorine.Free Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW10 Tester
The Total Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW11 Total Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.Total Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW11 Tester
The MI527-25 IodinePowder reagent kit includes high-quality reagents that are ready-to-use with MW13. The MW34 meter and reagents use the DPD Method. The reaction between Iodineand the reagent causes a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.0 to 12.5 ppm (mg/L). Iodinepowder reagent replacement kit (25 tests) Pre-made reagents for precision and ease of use Marked with expiration date and lot number for traceability For use with the MW13 Tester
The MI528-25 Iron Powder Reagent Kit contains high quality reagents ready for use with the MW14 (Art. No. 895550). The MW14 meter and reagents use the USEPA method Phenatroline 315B adaptation. The reaction between iron and the reagent causes the sample to turn orange. Simply add the reagent to the sample, wait for the reaction and the photometer will determine the concentration by the colour. The reagents are designed for use with samples that have an expected range of 0.00 to 5.00 ppm (mg/L).- Reagent kit for iron powder (25 tests)- Pre-prepared reagents for precision and ease of use- Labeled with expiry date and lot number for traceability- For use with the MW14 tester
Iodine is used as disinfectant in various applications - one of the most common is the poultry industry waste water treatment. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - MI527-25 Powder reagents for iodine photometer (25 pieces) (item no. 895553) - MI0011 (10ml) glass cuvettes for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories. Frequently asked questions What exactly does the Milwaukee MW13 measure? It measures the iodine content in water quickly and reliably. Is it complicated to use? No, just add a water sample, add the reagent, press the button – that’s it. How quickly do I get a result? You’ll usually see the reading within a minute. Do I need anything else to take a measurement? Yes, suitable reagents are required and readily available. Can I use the tester even without any experience? Yes, it’s simple in design and easy to understand. How do I keep the tester in good working order for a long time? Clean it briefly after each use and store it in a dry place.
for pH/ORP electrodes
Neomeris cleaning solution ensures thorough cleaning and care of your pH and redox electrodes. Thanks to the practical, small 70 ml plastic bottle, this solution is also ideal for low consumption. Neomeris Cleaning Solution for pH and Redox Electrodes (Pepsin) – 70 ml Neomeris cleaning solution is a specially developed probe cleaner for the thorough care and cleaning of pH and redox electrodes. With its effective pepsin formula, it reliably removes deposits and organic contaminants that can impair measurement accuracy. Why use Neomeris cleaning solution? Effective cleaning of pH and redox electrodes Maintains precision and extends the service life of probes Ideal for laboratories, industry, and environmental analysis During use, electrodes can become contaminated with proteins, fats, or other residues. The pepsin-based Neomeris cleaning solution gently dissolves these deposits without damaging the sensitive membrane, keeping your electrode performing well and delivering reliable measurement results. Recommended use: Cleaning should be carried out regularly and in accordance with the manufacturer's instructions. Excessive use can impair the sensitivity of the electrode, so targeted care is crucial for optimal results. Product details: Contents: 70 ml Active ingredient: Pepsin Application: Cleaning of pH and redox electrodes Packaging: Practical plastic bottle Note: For cleaning glass electrodes. Not suitable for HORIBA LAQUAtwin testers and plastic electrodes.
This Neomeris cleaning solution is ideal for maintaining and cleaning pH and redox electrodes. The 500 ml bottle is versatile and particularly suitable for use in laboratories. The Neomeris cleaning solution is a highly effective special solution for the care and cleaning of pH and redox electrodes. With its pepsin-based formula, it reliably removes organic deposits such as proteins and other contaminants that can impair measurement accuracy. Thorough cleaning for precise and stable measurement results Extends the service life of glass electrodes Ideal for use in laboratories, industry, and environmental analysis pH and redox electrodes are sensitive measuring instruments that can become contaminated through improper storage or frequent use. Regular use of the Neomeris cleaning solution ensures that your electrodes remain ready for use and reliable at all times. Practical & hygienic: The 500 ml bottle is equipped with a hygienic cap that protects the solution from external contamination. Simply squeeze the bottle to dispense the required amount into the upper part – clean, controlled, and user-friendly. Important note: Suitable for cleaning glass electrodes. Not suitable for HORIBA LAQUAtwin testers and plastic electrodes. Product details: Contents: 500 ml Active ingredient: Pepsin Application: Cleaning pH and redox electrodes Packaging: Bottle with hygienic dispensing function Neomeris cleaning solution for daily use The practical 500 ml bottle makes the Neomeris cleaning solution ideal for regular use in laboratories, industrial environments, and other professional applications.