In the field of inorganic analysis, the corresponding measurement technology is also used in schools and universities, which is particularly suitable for training students. An outstanding example of this is the digital multi-parameter hand-held measuring instruments of the HORIBA WQ 300 series, which have been specially developed for checking water quality.
These devices make it possible to regularly check the water quality and to react quickly to potential problems, such as gastrointestinal diseases caused by contaminated water. Thanks to their ease of use, teachers, caretakers or hygiene officers can carry out the measurements independently. With precise results in real time, the hand-held measuring devices not only support safety and health in educational institutions, but also offer practical learning experiences for students.
By integrating the devices into science lessons, students learn to measure environmental parameters such as pH, conductivity or oxygen content and to understand their significance for the environment and health. At the same time, scientific skills, critical thinking and an awareness of environmental protection and sustainability are promoted.
The HORIBA WQ 300 series impresses with its user-friendliness, precision and versatility in the classroom. With these devices, students can learn how to apply the digital technology of the future in a practical way and recognize interdisciplinary connections in subjects such as biology, chemistry and geography.
HORIBA multi-parameter handheld meters for testing water quality in schools and universities
It is a microprocessor-controlled pH/temperature meter with extended measuring range (-2.00 to 16.00 pH), automatic temperature compensation, automatic calibration in 2 points and an accuracy of ± 0.02 pH.Design featuresFast, easy-to-read results with large digital LCD displayExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: simply insert the probe into the sample, stir gently and wait for the reading to stabiliseSimple push-button, automatic two-point calibration for increased accuracyDouble-junction, laboratory-grade gel-filled pH electrode for low maintenance and high performance, with screw cap for proper storageRobust stainless steel temperature probe3-foot probe cable for added testing flexibilityAutomatic shut-off and low power consumption for approx. 300 hours of continuous operation (battery included)
Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - Mi524-25 Powder reagents for total chlorine photometer (25 pieces) (art. no. 895552) - MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories.
Iodine is used as disinfectant in various applications - one of the most common is the poultry industry waste water treatment. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - MI527-25 Powder reagents for iodine photometer (25 pieces) (item no. 895553) - MI0011 (10ml) glass cuvettes for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories.
Der Milwaukee PH51 Waterproof pH-Tester kombiniert robustes Design mit präziser Messfunktion. Dank automatischer Temperaturkompensation (ATC) liefert er verlässliche pH-Werte – egal ob im Garten, Labor oder Aquaristikbereich. Die austauschbare Sonde verlängert die Lebensdauer des Instruments und vereinfacht Reinigung oder Wartung. Schnell betriebsbereit, effizient und langlebig – perfekt für anspruchsvolle Anwender.
Der Milwaukee PH54 Waterproof pH-Pen bietet robuste Bauweise und benutzerfreundliche Handhabung, ergänzt durch eine austauschbare Sonde. ATC garantiert genaue Ergebnisse – ideal für den Einsatz in feuchten oder anspruchsvollen Umgebungen. Handlich, zuverlässig und wartungsfreundlich – ein pH-Tester fürs tägliche Profi-Workload.
Das Milwaukee PH55 ist ein wasserdichtes, kompaktes Messgerät für pH und Temperatur. Mit automatischer Temperaturkompensation und einer austauschbaren Sonde liefert es schnelle und präzise Messergebnisse im Bereich 0,00–14,00 pH. Dank seiner robusten Bauweise ist es ideal für den Einsatz in Aquaristik, Hydroponik oder Umweltkontrolle. Die einfache Zwei-Punkt-Kalibrierung sorgt für zuverlässige Ergebnisse auch im professionellen Umfeld.
Das Milwaukee PH56 bietet präzise pH- und Temperaturmessungen mit hoher Auflösung (0,01 pH). Es ist wasserdicht nach IP65, mit automatischer Temperaturkompensation ausgestattet und verfügt über eine austauschbare Sonde. Besonders praktisch für Anwender, die Genauigkeit und Langlebigkeit benötigen – sei es in Laboren, der Lebensmittelindustrie oder im Outdoor-Bereich.
Der Milwaukee PH58 ist ein vielseitiges, wasserdichtes Messgerät für pH, Redox (ORP) und Temperatur. Mit automatischer Temperaturkompensation und austauschbarer Sonde liefert er zuverlässige Ergebnisse in verschiedenen Anwendungen – von Aquakultur über Laboranalysen bis hin zu Umweltprüfungen. Die robuste Bauweise und die einfache Kalibrierung machen den PH58 zum idealen Begleiter für präzise Messungen im Alltag und im professionellen Bereich.
Milwaukee PH600 Digital pH-Pen – präziser pH-Testkomfort für unterwegs. Misst im Bereich von 0,0–14,0 pH mit ± 0,1 Genauigkeit, ideal für Aquarien, Hydroponik und Labor. Einfache 1-Punkt-Kalibrierung, klare LCD-Anzeige. Kompakt, handlich und zuverlässig – für schnelle, genaue pH-Kontrollen jederzeit.
Der Milwaukee T75 Waterproof TDS Pen misst gelöste Feststoffe mit großer Genauigkeit im niedrigen Bereich. Automatische Temperaturkompensation (ATC) sorgt für konsistente Werte – selbst in herausfordernden Umgebungen. Wasserdicht, robust und praxisgerecht – ideal für Anwendung in Aquarien, Wasseraufbereitung oder Labor.
Der Milwaukee T76 Waterproof TDS Pen deckt hohe Konzentrationen gelöster Feststoffe ab – robust, wasserdicht und mit ATC-Technologie für verlässliche Messungen. Dank austauschbarer Sonde besonders langlebig und wartungsfreundlich. Optimal für professionelle Einsatzfelder mit anspruchsvollen Bedingungen.
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
IP Protection: IP67 Manufacturer article number: 50014153
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank. Your analysis case consists of the following components: 1x pocket tester 1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
IP Protection: IP67Manufacturer article number: 50014163
IP Protection: IP67 With exchangeable probe Manufacturer article number: 50014203
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank. Your analysis case consists of the following components: 1x pocket tester 1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
IP Protection: IP67 With exchangeable probe Manufacturer article number: 50014213
The XS Instruments Cond 7 Vio and 70 Vio multi-parameter hand-held measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time. The combined portable conductivity, total dissolved solids and temperature meter of the Vio series has an automatic, up to five-point, conductivity calibration for the most common conductivity calibration standards. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the measuring electrode, as well as our respective buffer solutions and the instructions. Complementary advantages of the 70 Vio version: GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unit Manufacturer article number: 50110412
The XS Instruments Cond 7 Vio and 70 Vio multi-parameter hand-held measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time. The combined portable conductivity, total dissolved solids, salinity (70 Vio only) and temperature meter of the Vio series has an automatic, up to five-point, conductivity calibration for the most common conductivity calibration standards. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the measuring electrode, as well as our respective buffer solutions and the instructions. Complementary advantages of the 70 Vio version: GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unit Manufacturer article number: 50110512