Mobile Sodium Ion Tester from Horiba with Temperature Measurement – precise and robust High-precision sodium ion tester with 2-point calibration – ideal for water and environmental analysis The Horiba LAQUAtwin Na-11 sodium ion tester was specifically designed for accurate measurement of sodium concentrations in a wide range of samples. The device enables direct on-site measurements. Its clear display shows both the Na⁺ concentration and the sample temperature in a single step, making field, laboratory, and greenhouse work significantly more efficient. Mobile sodium ion tester for precise on-site measurements Featuring 2-point calibration and automatic standard recognition (150 and 2000 ppm), the instrument can be easily adapted to different measurement requirements. The integrated temperature display and automatic temperature compensation ensure accurate results even under fluctuating environmental conditions. The robust IP67 housing is dustproof and waterproof, making the tester suitable for demanding daily use. With a battery life of approximately 400 hours, reliable long-term operation is ensured. The tester is supplied with standard solutions, sampling sheets, batteries, and matching pipettes for immediate use. Why sodium measurement matters – and why a handheld tester is the ideal solution Measuring sodium ions plays a crucial role in water, environmental, food, and agricultural analysis. Excessively high or low sodium concentrations can significantly affect water quality, soil structure, plant growth, and the quality of food products and drinking water. Regulatory limits and quality standards further require regular monitoring. A mobile sodium ion handheld tester enables fast and precise analysis directly at the point of use, without time-consuming sampling or laboratory analysis. The Horiba LAQUAtwin Na-11 combines this flexibility with high measurement accuracy and ease of use, making it ideal for routine monitoring, quality control, and research applications. Typical applications for the Horiba sodium ion tester Environmental monitoring: Measurement of sodium concentrations in surface and groundwater to assess water quality and ensure compliance with environmental standards. Food and beverage production: Testing sodium levels in food and beverages for quality assurance, product development, and regulatory compliance. Agriculture: Monitoring sodium content in irrigation water and soils to support plant health and optimize water management. Research & development: Use in laboratories for experimental studies on sodium ion behavior under varying conditions. Education: Utilized in schools and universities to demonstrate the use of ion-selective electrodes in analytical chemistry. Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Horiba Y046 Sampling Sheet B Contains 100 pcs. / boxuse for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract) for the latter, please use sampling sheet holder and cover the sensor during measurement for LAQUAtwin and Twin pocket meters, except conductivity and salt EC modelsManufacturer Part Nr. 3200053858

Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736

Waterproof multifunction meter for measuring conductivity, TDS, and temperature. Features automatic temperature compensation, a replaceable probe, and simple calibration for various applications. Milwaukee EC59 Waterproof Conductivity, TDS, and Temperature Meter – Precision and reliability for all water quality monitoring applications. The Milwaukee EC59 combines conductivity (EC), TDS, and temperature measurements into a single, compact handheld device. By integrating multiple measurement parameters, it is ideal for users who need to assess water quality quickly and easily without carrying multiple instruments. Automatic temperature compensation ensures reliable readings even when temperatures fluctuate. Additionally, automatic 1-point calibration allows for easy setup and regular accuracy checks, making the meter suitable for both beginners and experienced users. A key advantage of the EC59 is its replaceable electrode. The electrode can be swapped out if it wears down or performance declines, thereby extending the device's service life. Its robust, waterproof housing makes it a reliable tool for use in laboratories, greenhouses, or directly in the field. By simultaneously measuring conductivity, TDS, and temperature, the Milwaukee EC59 is suitable for a wide range of water quality monitoring and control applications. Technical Specifications Measurement parameters: Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0 to 3999 µS/cm | 0 to 2000 ppm TDS | 0.0 to 60.0 °C (32.0 to 140.0 °F) Resolution: 1 µS/cm / 1 ppm / 0.1 °C / 0.1 °F Accuracy (EC/TDS/Temp.): 2% of full scale | +/-0.5 °C (+/-1 °F) Temperature compensation: Automatic Key benefits at a glance Measurement of conductivity, TDS, and temperature with a single device Waterproof housing for daily use Replaceable electrode for extended service life Compact and user-friendly design Ideal for portable and stationary measurements Typical applications Water treatment Aquaculture Hydroponics Laboratory applications Environmental analysis Frequently Asked Questions Can I use the device even if I have no prior knowledge? Yes, it is easy to use and the readings can be taken quickly. What can I actually measure with this tester? You can check the water quality based on conductivity, TDS value and temperature. Is the device suitable for outdoor use? Yes, the waterproof housing protects the device when used in damp environments. Will I need to replace the probe at some point? Yes, the probe is replaceable and can be replaced if necessary. How quickly do I get a measurement result? The measurement is taken within a few seconds of immersion in water. For which applications is the device particularly suitable? It is suitable for aquariums, hydroponics, swimming pools and many other water-related applications. Is the device compact enough for use on the go? Yes, thanks to its handy size, it fits easily into a bag or toolbox.

The Total Chlorine powder reagent kit includes high-quality reagents that are ready-to-use with MW11 Total Chlorine Tester. The reagents use the DPD Method with a reaction between chlorine and reagent causing a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.Total Chlorine powder reagent replacement kit (25 reagent sachets)Pre-made reagents for precision and ease of useMarked with expiration date and lot number for traceabilityFor use with the MW11 Tester

The MI527-25 IodinePowder reagent kit includes high-quality reagents that are ready-to-use with MW13. The MW34 meter and reagents use the DPD Method. The reaction between Iodineand the reagent causes a pink tint in the sample. Simply add the reagent to the sample, wait for the reaction to take place and the photometer determines the concentration based on the color. The reagents are designed for use with samples that have an expected range of 0.0 to 12.5 ppm (mg/L). Iodinepowder reagent replacement kit (25 tests) Pre-made reagents for precision and ease of use Marked with expiration date and lot number for traceability For use with the MW13 Tester

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization.Key features include:- User friendly- Small & Ergonomic case design- Inexpensive- Large and easy to read display- Good accuracy and immediate resultsAccessories:- Mi526-25 Powder reagents for free chlorophotometer (25 pieces) (item no. 895551)- MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555)- MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556)The handy photometers are supplied in a carton box with all accessories. Frequently asked questions How easy is the Milwaukee MW10 to use? Very easy – just add a water sample, press the button, and the result is displayed immediately. How accurately does the tester measure the chlorine level? The tester provides reliable and precise readings for everyday use, e.g. in swimming pool water. Do I need any additional accessories for the measurement? Yes, reagents are required, but they are easy to buy and simple to use. How long does a measurement take, roughly? You will usually get the result in less than a minute. Is the device suitable for beginners? Absolutely; even without prior knowledge, you’ll get the hang of it quickly. How often do I need to maintain or clean the tester? Only occasionally – simply rinse with clean water after use.

A precise pH and temperature meter featuring automatic temperature compensation (ATC), automatic calibration, and an extended pH measurement range. The Milwaukee MW102 PRO+ stands out for its high measurement accuracy and ease of use. Milwaukee MW102 PRO+ portable pH and temperature meter for fast and reliable results The Milwaukee MW102 PRO+ is a microprocessor-controlled meter designed for the precise determination of pH and temperature. By combining both measurement parameters with automatic temperature compensation (ATC) and high accuracy, the device is suitable for demanding applications in laboratories and water analysis. Compared to basic pH meters, the MW102 PRO+ offers an extended pH measurement range and superior accuracy, enabling reliable analysis of both acidic and alkaline solutions. The large digital LCD ensures readings are easy to view and supports simple operation during daily use. A key advantage of the MW102 PRO+ is its automatic temperature compensation. It automatically accounts for temperature-related effects on pH readings, ensuring precise and reliable results even when sample temperatures fluctuate. The included temperature probe also allows for the direct measurement of the sample temperature. For simple and secure calibration, the device features automatic one- or two-point calibration. Calibration is conveniently performed at the touch of a button, facilitating quick setup and ensuring measurement reliability. The package includes a high-quality, gel-filled, double-junction pH electrode of laboratory grade. It is characterized by low maintenance requirements and reliable performance. The system is complemented by a robust stainless-steel temperature probe designed for daily use. Thanks to the flexible probe cable, measurements can be conveniently performed even in hard-to-reach sample containers. Its compact design and low weight make the MW102 PRO+ a practical companion for both mobile and stationary applications. The automatic shut-off function reduces energy consumption and contributes to long battery life. This makes the device suitable for regular measurements over extended periods. Technical Data Measurement parameters: pH | Temperature Measurement range: pH range: -2.00 to 16.00 pH | Temperature range: -5 to 70°C Calibration: Automatic Accuracy: ±0.02 pH Temperature compensation: Automatic Key Benefits at a Glance Simultaneous measurement of pH and temperature High measurement accuracy and fine resolution Gel-filled pH electrode with double junction Rugged stainless steel temperature probe Automatic shut-off function Typical Applications Water analysis Laboratory applications Research and development Environmental analysis Quality control Scope of Delivery Milwaukee MW102 PRO+ meter SE220 pH electrode MA831R temperature probe 9 V battery User manual Frequently Asked Questions Does the device also measure temperature? Yes, in addition to the pH value, the MW102 PRO+ also measures the temperature of the sample. Do I need to take the temperature into account myself when taking a measurement? No, the device automatically adjusts the readings to account for the temperature. Is the meter suitable for brewing, wine-making or hydroponics? Yes, the MW102 PRO+ was developed specifically for such applications. How accurate are the measurement results in everyday use? The device provides very precise and reliable readings, even in demanding applications. Is calibration complicated? No, automatic calibration is quick and easy to perform. Can I use the device regularly whilst on the move? Yes, the MW102 PRO+ is robust, easy to transport and suitable for mobile use. What makes this model better than basic pH meters? It measures more accurately, automatically takes temperature into account and delivers particularly stable results.

Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - Mi524-25 Powder reagents for total chlorine photometer (25 pieces) (art. no. 895552) - MI0011 (10ml) glass vials for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories. Frequently asked questions What exactly does the Milwaukee MW11 measure? It measures the total chlorine level in the water, i.e. free and combined chlorine together. Is the tester suitable for my pool? Yes, it is ideal for swimming pools, hot tubs and also for testing tap water. How quickly do I get a reading? It usually takes only about 1 minute for the result to appear. Do I need to do a lot of setting up or preparation? No, it is simple to use and easy to understand. Do I need any extra accessories to use it? Yes, suitable reagents are required and can be easily reordered. How do I look after the device properly? Rinse it briefly after use, and it will remain reliable for a long time.

Iodine is used as disinfectant in various applications - one of the most common is the poultry industry waste water treatment. Key features include: - User friendly - Small & Ergonomic case design - Inexpensive - Large and easy to read display - Good accuracy and immediate results Accessories: - MI527-25 Powder reagents for iodine photometer (25 pieces) (item no. 895553) - MI0011 (10ml) glass cuvettes for handy photometer (2 pieces) (Art.-No. 895555) - MI0013 Plastic stopper caps for 10 ml glass cuvettes (2 pieces) (Art.-No. 895556) The handy photometers are supplied in a carton box with all accessories. Frequently asked questions What exactly does the Milwaukee MW13 measure? It measures the iodine content in water quickly and reliably. Is it complicated to use? No, just add a water sample, add the reagent, press the button – that’s it. How quickly do I get a result? You’ll usually see the reading within a minute. Do I need anything else to take a measurement? Yes, suitable reagents are required and readily available. Can I use the tester even without any experience? Yes, it’s simple in design and easy to understand. How do I keep the tester in good working order for a long time? Clean it briefly after each use and store it in a dry place.

Waterproof pH and temperature meter with automatic temperature compensation and a replaceable electrode. The Milwaukee PH55 enables simultaneous measurement of pH and temperature and offers automatic one- or two-point calibration. Milwaukee PH55 waterproof pH and temperature meter with automatic temperature compensation and replaceable probe The Milwaukee PH55 is a compact, waterproof meter designed for the simultaneous determination of pH and temperature. By combining these two measurement parameters, the device is ideal for applications requiring reliable water quality monitoring. Its robust design and ease of use make the PH55 a practical solution for both portable use and routine measurements in laboratory or technical environments. A key advantage of the Milwaukee PH55 is its integrated automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during measurement, ensuring greater accuracy and reliable pH results, even under changing conditions. The replaceable electrode ensures cost-effective, long-term use of the meter. The probe can be replaced when worn without needing to discard the entire unit, thereby reducing maintenance costs and extending the device's service life. For user convenience, the PH55 features automatic one- or two-point calibration. It supports various international buffer standards, allowing for flexible use across a wide range of applications. Simultaneous display of pH and temperature further simplifies the monitoring and evaluation of measurements. The waterproof housing protects the meter during operation in damp environments, ensuring reliable performance under demanding conditions. Combined with its simple calibration and integrated temperature measurement, the Milwaukee PH55 is suitable for both private and professional users. Technical Specifications Measurement parameters: pH | Temperature Measurement range: -2.0 to 16.0 pH | -5.0 to 60.0 °C pH range: -2.0 – 16.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Automatic 1- or 2-point calibration with two sets of preset buffer solutions (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Benefits of the PH55 Simultaneous measurement of pH and temperature Waterproof housing Replaceable electrode Automatic one- or two-point calibration Support for various buffer standards Compact and handy design Typical Applications Aquaristics Water analysis Environmental monitoring Laboratory applications Water treatment Scope of Delivery Milwaukee PH55 pH and temperature meter Batteries User manual Frequently Asked Questions Can I read the pH value and temperature at the same time? Yes, both values are clearly displayed simultaneously. Is the device suitable for cold or warm water samples? Yes, it provides reliable measurements across a wide temperature range of -5 to 60°C. How quickly do I get a stable reading? The probe responds quickly and displays stable readings after a short time. Can I replace the probe myself if it wears out? Yes, the electrode can be easily replaced by unscrewing it. Does the device really float if it falls into the water? Yes, it floats on the water's surface and does not sink. Do I need to calibrate the device regularly? Yes, simple automatic 1- or 2-point calibration ensures accuracy. Is the device easy for beginners to use? Yes, operation is simple and very intuitive thanks to the use of icons.

Waterproof meter for the simultaneous measurement of pH, redox potential, and temperature. The Milwaukee PH58 features automatic temperature compensation and a replaceable electrode. Milwaukee PH58 waterproof pH, redox, and temperature meter with automatic temperature compensation and replaceable electrode The Milwaukee PH58 is a versatile meter for the simultaneous determination of pH, redox potential (ORP), and temperature. By combining these three key parameters, the device is ideally suited for applications requiring a comprehensive assessment of water quality. Whether in aquaculture, water treatment, environmental analysis, or the laboratory, the PH58 enables reliable and convenient monitoring of various readings using a single device. A key advantage of the Milwaukee PH58 is its redox measurement capability. In addition to pH and temperature, it measures the oxidation-reduction potential of a solution. This provides users with a more complete picture of water quality, allowing for better monitoring and documentation of critical processes. To ensure precise results, the device features automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during pH measurement, ensuring stable and reliable readings. The integrated temperature sensor also allows for direct monitoring of the sample temperature. The replaceable electrode ensures a long service life for the meter. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire unit. This significantly reduces ongoing costs and simplifies maintenance. pH calibration is performed automatically via a one- or two-point process using standard buffer solutions. The redox sensor comes factory-calibrated and is ready for immediate use, enabling quick setup and reducing the workload for the user. The waterproof housing protects the device during work in damp environments, making the PH58 a reliable solution for both mobile and stationary use. Its robust design, ease of use, and versatile measurement capabilities make this model an ideal companion for professional users and demanding measurement tasks. Technical Specifications Measurement parameters: pH | ORP (Redox) | Temperature Measurement range: -2.00 to 16.00 pH | ±1000 mV ORP | -5.0 to 60.0 °C (23 to 140 °F) Resolution: 0.01 pH | 1 mV | 0.1 °C (0.1 °F) Accuracy: ±0.05 pH | ±2 mV | ±0.5 °C (1 °F) Calibration: Automatic 1- or 2-point calibration with two sets of preset buffers (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Key Benefits at a Glance Simultaneous measurement of pH, ORP, and temperature Integrated ORP measurement for advanced water analysis Automatic one- or two-point calibration for pH measurements Factory-calibrated ORP measurement High measurement accuracy and fine resolution Suitable for mobile and stationary applications Typical Applications Aquaculture Aquarium hobby Water treatment Environmental monitoring Laboratory applications Process water monitoring Scope of Delivery Milwaukee PH58 pH, ORP, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with the PH58? Yes, the device measures pH, temperature, and redox levels in a single operation. Is the meter suitable for use in pools or ponds? Yes, it is ideal for pools, ponds, aquariums, and other water applications. What happens if the device falls into the water? No problem—the PH58 is waterproof and floats. Do I need to replace the probe if the readings become less accurate? Yes, the probe can be easily replaced without having to buy a new device. Does the device provide accurate readings at varying temperatures? Yes, automatic temperature compensation adjusts for temperature fluctuations. Is calibration complicated or time-consuming? No, calibration is simple and can be completed in just a few steps. Is the PH58 suitable for beginners? Yes, the device is easy to use and displays readings clearly.

Compact digital pH tester for the rapid determination of pH levels in liquids. The Milwaukee PH600 stands out thanks to its ease of use, easy-to-read display, manual 1-point calibration, and long battery life. Ideal for aquariums, hydroponics, water analysis, and many other applications. Milwaukee PH600 digital pH tester – Simple operation for quick measurements The Milwaukee PH600 is a compact digital pH tester that enables fast and straightforward pH measurements across various applications. Its handy design makes the device ideal for mobile use, allowing for reliable on-site pH monitoring. The measurement range covers the entire pH spectrum—from highly acidic to highly alkaline solutions—making the PH600 a versatile tool for aquariums, hydroponics, water analysis, horticulture, laboratory work, and many other fields. The easy-to-read LCD display ensures convenient reading of measurements and makes the device simple to operate, even for users without extensive experience in measurement technology. To ensure reliable accuracy, the pH tester features manual 1-point calibration. This allows the device to be quickly recalibrated whenever necessary, guaranteeing consistently precise results. Additionally, the long battery life ensures reliable operation over extended periods, making the Milwaukee PH600 a practical companion for routine checks. Thanks to its ease of use, compact design, and reliable measurement technology, the Milwaukee PH600 is suitable for both private and professional users seeking a cost-effective pH measurement solution. Benefits Compact and handy pH tester Manual 1-point calibration Long battery life Suitable for mobile and stationary applications Versatile use across various fields Measurement parameter: pH Measurement range: 0.0 to 14.0 pH Typical applications Aquaristics Hydroponics Water analysis Horticulture Laboratory applications Education and training General pH monitoring Frequently Asked Questions How quickly does the device display the pH value? You see the reading immediately after immersion. Can I use the device in the garden and in water? Yes, you can use it for plants, soil, hydroponics, and pools. Is the device easy for beginners to use? Yes, you can simply switch it on, take a measurement, and read the value directly. How accurate are the measurements in everyday use? The measurements are very reliable and help you ensure proper care. Do I need to consider the temperature? No, the device automatically adjusts to different temperatures. Can it also help me take better care of my plants? Yes, you can quickly see whether the pH level is optimal for healthy plants. Is the device robust enough for regular use? Yes, it is designed for daily use in the garden or around the house.

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

IP Protection: IP67 Manufacturer article number: 50014153

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67Manufacturer article number: 50014163

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014203

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014213