Manufacturer number: 3200585455This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.Electrode: 251mm length, 7mm diameterConstructed with responsive glass that is 10x stronger than JIS standardsWaterproof, Pb-free glass

Manufacturer number: 3200585463pH electrode with integrated temperature sensor for stable measurements of highly viscous samples. The saline bridge part is equipped with a movable sleeve that can be easily cleaned to prevent viscous samples from clogging the saline bridge and to keep measurements stable and accurate.Rapid stabilisation and reduction of aeronauticsToupH electrodes use sensitive glass, reducing the risk of damageWaterproof (IP-67), pb-free glassWhen measuring samples with high viscosity or non-aqueous solutions (e.g. paints or cosmetics), we recommend using the instrument's chart function to ensure stability.

The Horiba LAQUA 300 BNC adapter is an intermediate piece to connect an ion selective electrode to the Smart Sensor Module with cable to an 300 series meter. After prior clarification with our company, your previous pH and redox electrodes can, if applicable, be connected to the 300 series meter after a compatibility check.Manufacturer number: 3200821465

300-P-C pH sensor cartridgeManufacturer article number: 3200786363

pH cable with digital sensor head to mount the "300-P-C pH electrode". Manufacturer Part Nr. :  3200812206 (2 metres 300-PH-2) 3200812207 (5 metres 300-PH-5)

pH cable with digital sensor head to mount the "300-P-C pH electrode". Manufacturer Part Nr. :  3200812206 (2 metres 300-PH-2) 3200812207 (5 metres 300-PH-5)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long service life due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series. During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users.  The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnosis function. The fold-out stand on the back of the devices means that you always have your hands free to carry out your measurements easily and safely. Version PC220 with GLP functions Measurement data storage of 1000, instead of 500 data sets Measurement and calibration data are stored GLP compliant with date and time stamp PC communication via optional USB cable RS232 printer function to print the measurement data Scope of delivery: Handheld meter PC210 or PC220 2x AA battery manual and quick reference guide Manufacturer article number:  3200779543 (PC210) 3200779544 (PC220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long service life due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series. During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users.  The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnosis function. The fold-out stand on the back of the devices means that you always have your hands free to carry out your measurements easily and safely. Version PC220 with GLP functions Measurement data storage of 1000, instead of 500 data sets Measurement and calibration data are stored GLP compliant with date and time stamp PC communication via optional USB cable RS232 printer function to print the measurement data Scope of delivery: Handheld meter PC210 or PC220 2x AA battery manual and quick reference guide Manufacturer article number:  3200779543 (PC210) 3200779544 (PC220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series.  During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users. The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely.   PD220 version with GLP functions  Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data  Scope of delivery: Hand-held meter PD210 or PD220 2x AA battery manual and quick reference guide Manufacturer article number: 3200779545 (PD210)  3200779546 (PD220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series.  During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users. The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely.   PD220 version with GLP functions  Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data  Scope of delivery: Hand-held meter PD210 or PD220 2x AA battery manual and quick reference guide Manufacturer article number: 3200779545 (PD210)  3200779546 (PD220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation. In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series. During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users.  The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely. Instruments marked as "Kit" are delivered in a reinforced measuring case for mobile use in the open air. This contains the exchangeable measuring electrode, the corresponding cable which is connected to the device and the electrode, as well as the appropriate buffer or calibration solutions and instructions. If you want to carry out measurements of different parameters with different electrodes, you can simply connect the electrodes to each other at the upper part and then immerse them in the measuring solution. PH220 version with GLP functions Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data Scope of delivery: PH210 or PH220 handheld meter  2x AA battery  Robust measuring case manual and quick reference guide Manufacturer article number:   3200779537 (PH210)  3200779538 (PH220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation. In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series. During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users.  The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely. Instruments marked as "Kit" are delivered in a reinforced measuring case for mobile use in the open air. This contains the exchangeable measuring electrode, the corresponding cable which is connected to the device and the electrode, as well as the appropriate buffer or calibration solutions and instructions. If you want to carry out measurements of different parameters with different electrodes, you can simply connect the electrodes to each other at the upper part and then immerse them in the measuring solution. PH220 version with GLP functions Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data Scope of delivery: PH210 or PH220 handheld meter  2x AA battery  Robust measuring case manual and quick reference guide Manufacturer article number:   3200779537 (PH210)  3200779538 (PH220)

Manufacturer Part Nr. 3200459834

Horiba Y046 Sampling Sheet B Contains 100 pcs. / boxuse for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract) for the latter, please use sampling sheet holder and cover the sensor during measurement for LAQUAtwin and Twin pocket meters, except conductivity and salt EC modelsManufacturer Part Nr. 3200053858

Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736

The pH sensor 7112 is a high-quality original replacement part for the HORIBA U-50 series of multiparameter measuring devices. It enables precise and reliable pH measurements in a wide range of water quality applications – from environmental monitoring to industrial process control.Quick replacement – can be mounted on the U-50 probe unit without toolsDurable & robust – designed for use in harsh environmental conditions Manufacturer article number: 3014057312

The Milwaukee MA906BR/1 Reinforced pH/Redox/Temp replacement electrode for Milwaukee MW105 pH/Temp and MW106 pH/ORP/Temp meters.The MA906BR/1 has a rugged housing (epoxy) and comes with a 1m cable and BNC connector (meters sold separately).OPR probes for MW105 or MW106 are available separately.The probe connects quickly and firmly to a BNC connector. No slipping off is to be feared.

The MA911B/2 probe is lab grade, gel-filled pH probe for use with Milwaukee Monitors and Controllers.DESIGN FEATURESTop features include:DOUBLE JUNCTIONThe double junction junction design reduces the risk of clogging.SPHERICAL GLASS TIPThe sperical glass tip provide the largest possible surface area for faster results.RESIN BODYThe resin body is tough to withstand accidental knocks and also protects the glass sensing bulb.EXTENDED CABLEOffers a 2m cable for increased flexibility in measuring.USE AND CAREpH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function. You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibiration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and block the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.

The MA917B/1 probe makes pH testing easy and fast.Top features include:DOUBLE JUNCTIONThe double junction design reduces risk of clogging with the reference cell physically separated from the intermediate electrolyte.REFILLABLEThe MA917B/1 refillable with MA9011 3.5M KCl. This solution is sliver free. Sliver can cause silver precipitate to form at the junction resulting in clogging. Clogging causes erratic and slow readings. The ability to refill the electrolyte also extends the life of the electrode.GLASS BODYThe glass body is easily cleaned and resistant to chemicals.ROUND TIPThe round design of the tip provides the largest possible surface area for faster readings and is well suited to testing liquid samples.

Manufacturer article number: Mi56P

Manufacturer article number: Mi58P

Manufacturer article number: Mi60P

Original spare part from HORIBA – guaranteed to fit the U-50 series perfectlyThe Horiba Reference Electrode Tip 7210 is a high-quality replacement part designed specifically for Horiba's U50 series of multiparameter measuring devices. It ensures a precise and stable reference voltage, which is essential for reliable measurement results in demanding environmental and water analyses. The electrode tip is easy to replace and helps to extend the service life of the entire system. Thanks to its robust design, it is ideal for use in harsh field conditions. With the 7210 reference electrode tip, your U50 measuring device will always be ready for use and perform at its best. Manufacturer article number: 3200043582

Manufacturer number: 50002072Gel filling with porous separator, maintenance-free, fixed cable 3m, pH 0 to 14, temperature 0 to 60°C