Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.

Manufacturer number: 3200528726This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for pH measurement of samples that have low conductivity or buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.

Manufacturer number: 320052411This plastic-body, refillable pH electrode with integrated temperature sensor can measure 1% hydrofluoric acid solution (at 25°C, immersed for 1min) for about 1000X. Suitable for drain water measurement after etching process.

The Horiba 9652-10D pH electrode with double diaphragm is a durable, gel-filled glass electrode in a robust plastic housing, specially developed for mobile use with handheld measuring devices from the LAQUA 200 series. It covers a measuring range from 0 to 14 pH and guarantees reliable results in a temperature range from 0 to 80 °C. The combination of a double diaphragm (double junction) and a porous, sintered polyethylene contact ensures stable measuring performance even under demanding conditions. An integrated temperature sensor enables accurate, temperature-compensated pH measurements. Thanks to its gel filling, the electrode is virtually maintenance-free and does not require refilling of the electrolyte solution.  Manufacturer item number: 3200786359

The Horiba 9652-20D pH electrode with double diaphragm is a gel-filled pH glass electrode in a robust plastic housing, ideal for outdoor use in conjunction with handheld measuring devices from the LAQUA 200 series. It offers a measuring range from 0 to 14 pH and works reliably in a temperature range from 0 to 80 °C. Thanks to the double diaphragm (double junction) and the porous, sintered polyethylene liquid contact, it ensures high measurement stability. An integrated temperature sensor ensures precise, temperature-compensated measurements. The electrode is low-maintenance as it is gel-filled and does not need to be refilled. Manufacturer Part Nr. 3200786361

Manufacturer number: 3200585455This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.Electrode: 251mm length, 7mm diameterConstructed with responsive glass that is 10x stronger than JIS standardsWaterproof, Pb-free glass

Manufacturer number: 3200585463pH electrode with integrated temperature sensor for stable measurements of highly viscous samples. The saline bridge part is equipped with a movable sleeve that can be easily cleaned to prevent viscous samples from clogging the saline bridge and to keep measurements stable and accurate.Rapid stabilisation and reduction of aeronauticsToupH electrodes use sensitive glass, reducing the risk of damageWaterproof (IP-67), pb-free glassWhen measuring samples with high viscosity or non-aqueous solutions (e.g. paints or cosmetics), we recommend using the instrument's chart function to ensure stability.

The Horiba LAQUA 300 BNC adapter is an intermediate piece to connect an ion selective electrode to the Smart Sensor Module with cable to an 300 series meter. After prior clarification with our company, your previous pH and redox electrodes can, if applicable, be connected to the 300 series meter after a compatibility check.Manufacturer number: 3200821465

300-2C2C, 2-cell conductivity sensor cartridge, stainless steel, K=0.1 0.01 to 500µS/cm to 2000 mS/cmManufacturer article number: 3200820579

300-4C-C, 4 cell conductivity sensor cartridge, epoxy, carbon body, 10µS/cm to 2000 mS/cmManufacturer article number: 3200780928

Conductivity/TDS/resistivity/salinity cable with digital sensor head to mount the conductivity sensors of type "300-2C2C" and "300-4C-C". Manufacturer Part Nr. :  3200784468 (2 metres 300-C-2) 3200812202 (5 metres 300-C-5)

Conductivity/TDS/resistivity/salinity cable with digital sensor head to mount the conductivity sensors of type "300-2C2C" and "300-4C-C". Manufacturer Part Nr. :  3200784468 (2 metres 300-C-2) 3200812202 (5 metres 300-C-5)

Optical dissolved oxygen sensor with hard moulded 2m or 5m cable including a membrane cap. Manufacturer Part Nr.  3200780940 (2 metres = 300-D-2)  3200780942 (5 metres = 300-D-5)

Optical dissolved oxygen sensor with hard moulded 2m or 5m cable including a membrane cap. Manufacturer Part Nr.  3200780940 (2 metres = 300-D-2)  3200780942 (5 metres = 300-D-5)

Cable with digital sensor head to accommodate the ion selective sensors.   Manufacturer Part Nr. :3200812203 (2 metres 300-I-2)    3200923560 (5 metres 300-I-5) Note: To use the ion selective sensors, the respective adapters are required.

Cable with digital sensor head to accommodate the ion selective sensors.   Manufacturer Part Nr. :3200812203 (2 metres 300-I-2)    3200923560 (5 metres 300-I-5) Note: To use the ion selective sensors, the respective adapters are required.

ORP cable with digital sensor head to mount the "300-O-C ORP electrode".  Manufacturer Part Nr. :   3200812204 (2 metres 300-O-2)  3200923561 (5 metres 300-O-5)

ORP cable with digital sensor head to mount the "300-O-C ORP electrode".  Manufacturer Part Nr. :   3200812204 (2 metres 300-O-2)  3200923561 (5 metres 300-O-5)

300-O-C ORP sensor cartridge Manufacturer article number: 3200922104

300-P-C pH sensor cartridgeManufacturer article number: 3200786363

pH cable with digital sensor head to mount the "300-P-C pH electrode". Manufacturer Part Nr. :  3200812206 (2 metres 300-PH-2) 3200812207 (5 metres 300-PH-5)

pH cable with digital sensor head to mount the "300-P-C pH electrode". Manufacturer Part Nr. :  3200812206 (2 metres 300-PH-2) 3200812207 (5 metres 300-PH-5)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series.  During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users. The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely.  EC220 version with GLP functions  Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data  Scope of delivery: Hand-held meter EC210 or EC220 2x AA battery manual and quick reference guide Manufacturer article number: 3200779539 (EC210) 3200779540 (EC220)

The high-quality multi-parameter hand-held meters of the LAQUA 200 series manufactured by Horiba are suitable for use in the field under any conditions and in direct daylight thanks to their monochrome LCD display with LED backlight.  Another advantage of these devices is that the hand-held meters are very shock and scratch resistant due to the special rubber coating and offer a long operating time due to the AA 2500 mAh batteries used. An IP67 certification, which certifies dust-tightness and protection against temporary submersion for up to 30 minutes at a water depth of one metre, rounds off the professional overall package in addition to the ergonomic design and simple operation.  In the certainty of producing high-quality devices, the manufacturer Horiba offers you a three-year guarantee on the hand-held measuring devices of the LAQUA 200 series.  During the measurements, the user is supported by the display of instructions in the form of smiley symbols. This is intended to prevent operating errors that can lead to implausible measurement results. Furthermore, the measuring device has only 9 keys and no menu texts. This design decision serves, among other things, to ensure that the device can be operated as easily as possible during discontinuous use or when used by other users. The Horiba meters have an electrode wear indicator, a lock function to "save" the current measured value on the display, automatic calibration functions and a self-diagnostic function. The fold-out stand on the back of the units means that you always have your hands free to carry out your measurements easily and safely.  EC220 version with GLP functions  Measurement data storage of 1000, instead of 500 data sets  Measurement and calibration data are stored GLP compliant with date and time stamp  PC communication via optional USB cable  RS232 printer function to print the measurement data  Scope of delivery: Hand-held meter EC210 or EC220 2x AA battery manual and quick reference guide Manufacturer article number: 3200779539 (EC210) 3200779540 (EC220)