Milwaukee
Conductivity (EC) and TDS (Total Dissolved Solids) measurement with pocket testers is useful because it provides a quick and easy way to check the purity and mineral concentration of water. Here are the main reasons for using these meters:
- water quality & drinking water monitoring
- Checking the purity of tap and spring water
- Detection of impurities and dissolved salts
- Checking the efficiency of water filters or reverse osmosis systems
- hydroponics & agriculture
- Ensuring the correct nutrient concentration for plant growth
- Monitoring salt and mineral concentrations in fertilizer solutions
- Avoidance of over-fertilization or nutrient deficiency
- aquaristics & fish farming
- Control of water quality in aquariums and ponds
- Avoidance of harmful salt concentrations
- Ensuring a stable mineral balance for fish
- pool & spa water care
- Checking the salt content in saltwater pools
- Checking the chemical balance for clear water
- Supplement to pH and redox measurement
- industry & laboratory applications
- Measurement of conductivity in chemical solutions
- Monitoring of production processes in the food & pharmaceutical industry
- Quality control of ultrapure water in laboratories and electronics production
- wastewater & environmental monitoring
- Monitoring industrial wastewater for dissolved substances
- Detection of pollution in rivers, lakes or sewage treatment plants
- Checking the salt concentration in soil water
Why pocket testers?
- Compact & mobile - Ideal for measurements on the go
- Easy to use - No complicated calibration required
- Immediate results - Direct display of conductivity or TDS value
- Cost-effective - Significantly cheaper than large laboratory measuring devices
Der Milwaukee C65 Waterproof EC Pen bringt robuste Technik für präzise Leitfähigkeitsmessungen im niedrigen Bereich. Automatische Temperaturkompensation (ATC) sorgt für verlässliche Messergebnisse bei wechselnden Bedingungen. Dank wasserdichtem Gehäuse und austauschbarer Sonde ist das Gerät ideal für den Outdoor-Einsatz, Labor oder Messungen in feuchten Umgebungen.
Der Milwaukee C66 Waterproof EC Pen überzeugt durch Robustheit und hohe Messbereiche. Mit ATC und Austauschsonde liefert er auch bei extremen Bedingungen präzise Leitfähigkeitswerte. Ideales Werkzeug für Aquaristik, Industrie oder Feldarbeit – langlebig, zuverlässig und leicht zu bedienen.
Milwaukee CD600 TDS-Tester – misst zuverlässig die Konzentration gelöster Feststoffe (TDS). Kristallklare Anzeigen, einfache Handhabung. Zuverlässig für Wasserqualitätskontrolle, Umweltanalyse & Hydroponik. Kompakt, präzise, praxistauglich.
Milwaukee CD601 EC-Pen – handliches Leitfähigkeitstool für schnelle & verlässliche Messungen. Messbereich 0–1990 µS/cm, Auflösung 10 µS/cm, mit ATC (Automatische Temperaturkompensation); Genauigkeit ±2 % FS. Einfache 1-Punkt-Kalibrierung, robust, ideal für Aquarien, Wasseranalysen & Feldmessungssituationen.
Der Milwaukee CD610 ist ein präziser TDS-Tester für Anwendungen im hohen Messbereich. Er ermittelt zuverlässig die Konzentration gelöster Feststoffe (Total Dissolved Solids) im Wasser und eignet sich ideal für industrielle Umgebungen, Aquakultur, Landwirtschaft oder Wasseraufbereitung mit hohem Mineralgehalt. Das kompakte, handliche Design ermöglicht eine einfache Bedienung, während die robuste Bauweise für langlebige Einsatzfähigkeit sorgt. Dank seines weiten Messbereichs ist der CD610 die perfekte Wahl, wenn Standard-TDS-Tester an ihre Grenzen stoßen.
Milwaukee CD611 Leitfähigkeitstester – ideal für präzise Leitfähigkeitsmessung im mittleren bis hohen Bereich. Automatische Temperaturkompensation sorgt für verlässliche Resultate. Robust konstruiert und leicht bedienbar – perfekt für Labor oder Außeneinsatz.
Milwaukee CD97 TDS-Pen – spezialisiert auf niedrige Konzentrationen gelöster Feststoffe. Extrem feine Auflösung & Sensitivität, ideal für Reinwasser- & Laboranwendungen. Schnell, exakt und ideal für hohe Ansprüche an Genauigkeit.
This Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.- Readings are displayed with 20 LEDs graph bar- Range 0.2 to 4 mS/cm- The alarm feature is user settable and is displayed on the LED bar- No calibration required- Auto-ON/OFF function- The auto-check feature indicates the battery level- Waterproof and floating design makes the stick an appropriate tool for stirring nutrient solutions in a bucket/tank- Graphite EC probe with ATC
Der EC59 von Milwaukee ist ein vielseitiger, wasserdichter Tester zur Messung von Leitfähigkeit (EC), gelösten Feststoffen (TDS) und Temperatur. Mit automatischer Temperaturkompensation und einer wechselbaren Sonde ausgestattet, eignet er sich für Anwendungen in Wasseraufbereitung, Aquakultur und Hydroponik. Seine robuste Bauweise und einfache Bedienung machen ihn zum zuverlässigen Begleiter im Alltag.
Das Milwaukee EC60 ist die ideale Lösung für Messungen mit hohem Leitfähigkeitsbereich. Es kombiniert EC-, TDS- und Temperaturmessungen in einem wasserdichten Gerät und bietet automatische Temperaturkompensation. Die austauschbare Sonde sorgt für lange Einsatzdauer. Optimal für industrielle Anwendungen oder Umgebungen, in denen besonders hohe Salz- oder Mineralgehalte zu messen sind.
The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX). Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7
The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX). Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7
The MW301 is a portable conductivity (EC) meter with automatic temperature compensation.It is designed to meet the farmer's need for equipment suitable for the aggressive environments of agriculture and hydroponics.Conductivity testing provides a method to optimise chemical use and minimise operating costs.In agriculture, soil conductivity is tested before fertiliser is applied to determine the need in the field, and after fertilisation to determine its effectiveness.In hydroponics, EC measurement is ideal for determining the concentration of fertiliser in a solution.After the determination, the grower can adjust the nutrient formula for optimal plant growth. The MW301 has a measuring range of 0 to 1990 µS/cm with a resolution of 1 µS/cm.This conductivity meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution.Design featuresMeasuring range 0 to 1990 µS/cm Fast, easy to read results with large digital LCD displaySupplied with a conductivity probe attached to a 3-foot cableAccuracy to ±2Lightweight and portable300 hours of continuous battery life (battery included)MW301 PRO comes complete with SE510 EC probe, 20ml 1413 µS/cm bag of calibration solution, screwdriver for calibration, 9V battery and instructions.
MW302 is a high range portable conductivity meter (EC) with automatic temperature compensation.This meter is designed to meet the need for equipment suitable for agricultural and hydroponic environments and it is also an excellent meter for food, laboratory and water treatment applications.Conductivity testing provides a method for optimising chemical use and minimising operating costs and in hydroponics, conductivity measurement is ideal for determining the concentration of fertiliser in a solution.Once determined, one can adjust the nutrient formula for optimal plant growth.The MW302 has a measuring range of 0.0 to 10.0 mS/cm with a resolution of 0.1 mS/cm.This EC meter comes complete with conductivity probe with a 1m cable and calibration solution.
The portable 4-in-1 MW306 PRO conductivity/TDS/NaCl (salinity)/temperature meter has won many fans worldwide with its reliable fast and easy operation. It is also very rugged and has IP67 waterproof rating. It has a user-friendly interface for data exchange and as mentioned at the beginning, it is designed to measure four different parameters of water. Ideal for use in hydroponics, horticulture, laboratories, food processing, water treatment and many other applications with demanding measurement requirements.
MW401 is a portable TDS meter with automatic temperature compensation and low range.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.In water treatment, high TDS can affect the clarity and taste of drinking water.The MW401 has a measuring range of 0 to 1990 mg/L (ppm) with a resolution of 10 mg/L (ppm).This meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution.
MW402 is a high range (TDS) portable conductivity meter with automatic temperature compensation.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.A high TDS value can affect the clarity and taste of drinking water.The MW402 has a measuring range of 0.0 to 10.0 g/L (ppt) with a resolution of 0.1 g/L (ppt).This TDS meter comes complete with conductivity probe with 1 meter (3.3') cable and a calibration solution.
This 3-in-1 low range combination meter allows you to measure pH, EC (conductivity) and TDS with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1382 ppm calibration solution, a 9 V battery and instructions.
This 3-in-1 combination meter allows you to measure pH, EC high range (conductivity) and TDS high range with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1500 ppm calibration solution, a 9 V battery and instructions.
Das Milwaukee MW803 ist ein kompaktes, wasserdichtes All-in-One-Messgerät für pH, Leitfähigkeit, TDS und Temperatur. Speziell für Messungen im niedrigen Leitfähigkeitsbereich entwickelt, eignet es sich optimal für Hydroponik, Trinkwasseranalysen und Anwendungen mit geringer Salzkonzentration. Dank automatischer Temperaturkompensation, austauschbarer Sonde und einfacher Handhabung bietet der MW803 höchste Zuverlässigkeit auch im mobilen Einsatz.
Der Milwaukee MW804 kombiniert pH-, Leitfähigkeits-, TDS- und Temperaturmessungen in einem robusten, wasserdichten Gerät. Mit seinem hohen Messbereich ist er besonders für Anwendungen in der Landwirtschaft, oder Aquakultur geeignet. Die automatische Temperaturkompensation und die austauschbare Sonde gewährleisten präzise und langlebige Messungen – auch bei hohen Salz- oder Mineralgehalten.
This MW805 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from .40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852D/1 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
This High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from 0.40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutionsGel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
Der Milwaukee T75 Waterproof TDS Pen misst gelöste Feststoffe mit großer Genauigkeit im niedrigen Bereich. Automatische Temperaturkompensation (ATC) sorgt für konsistente Werte – selbst in herausfordernden Umgebungen. Wasserdicht, robust und praxisgerecht – ideal für Anwendung in Aquarien, Wasseraufbereitung oder Labor.