Combined / Multiparameter Instruments from Milwaukee
Milwaukee’s multiparameter meters allow you to measure several key water quality parameters simultaneously – quickly, precisely, and with a single device. These all-in-one instruments save time, space, and effort, making them the ideal solution for a wide range of professional applications.
Which parameters are measured?
Depending on the model – such as the Milwaukee MW806 (896146) – the following parameters can be measured at the same time:
- pH – for assessing the acid-base balance of a solution
- Electrical Conductivity (EC) – indicates ion concentration and salinity
- TDS (Total Dissolved Solids) – measures the total amount of dissolved solids in ppm or g/L
- Temperature – affects all other values and is key for compensation and accuracy
Typical applications
Milwaukee multiparameter meters are suitable for both field use and permanent installation in industrial and laboratory environments:
- Hydroponics & Aquaponics: Monitor nutrient solutions for optimal plant development
- Aquaculture & Fish Farming: Control water quality to ensure healthy aquatic environments
- Environmental Monitoring: Analyze surface, ground, or wastewater on-site or in the lab
- Agriculture & Irrigation: Check irrigation water for salinity and pH
- Food & Beverage Industry: Maintain quality and consistency in water and process control
- Water Treatment & Industry: Reliable multi-parameter monitoring in technical systems
Milwaukee MC810 MAX, pH/TDS/Temp. monitor
Product number:
896174
Version:
pH / TDS / Temperature Monitor
|
The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX).
Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7
€259.80*
Milwaukee MC811 MAX, pH/EC/Temp. monitor
Product number:
896175
Version:
pH / Conductivity / Temperature Monitor
|
The MC810 MAX and MC811 MAX monitors provide measurement and 24 hour continious tracking of pH, conductivity (TDS with MC810 MAX and EC with MC811 MAX) and temperature.Quick to setup and simple to use, these monitors can be calibrated at one or two points for pH, and at one point for TDS (MC810 MAX) or EC (MC811 MAX).
Results are monitored with 3 large LCD readouts, for simultaneous display of all three main parameters, and the temperature range is factory calibrated.The unit can be mounted above the sample to be tested or rested on a flat surface next to the sample, and the 2m probes cable length allows for a correct positioning and adequate viewing.An external switch atop the MC810 MAX converts EC conductivity to TDS (ppm) using a fixed 0.5 or 0.7 conversion factor.Features include:Easy Manual CalibrationNo Buttons to ProgramNo Waiting for Software ConfirmationEasy Wall Bracket Set-up (Brackets included)Backlit LCDTwo point pH calibrationOne point TDS/EC calibrationReplaceable pH electrode"Easy switch" TDS Conversion Technology between 0.5 and 0.7
€259.80*
Tip
Milwaukee MW102 PRO+ portable pH/temperature meter for fast and reliable results
Product number:
895562
Measurement parameters:
pH-Range: -2.00 to 16.00 pH | Temperature-Range: -5 to 70°C
It is a microprocessor-controlled pH/temperature meter with extended measuring range (-2.00 to 16.00 pH), automatic temperature compensation, automatic calibration in 2 points and an accuracy of ± 0.02 pH.Design featuresFast, easy-to-read results with large digital LCD displayExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: simply insert the probe into the sample, stir gently and wait for the reading to stabiliseSimple push-button, automatic two-point calibration for increased accuracyDouble-junction, laboratory-grade gel-filled pH electrode for low maintenance and high performance, with screw cap for proper storageRobust stainless steel temperature probe3-foot probe cable for added testing flexibilityAutomatic shut-off and low power consumption for approx. 300 hours of continuous operation (battery included)
€166.10*
Milwaukee MW102-FOOD PRO+ 2-in-1 pH and Temperature Meter for Food
Product number:
896148
Measuring range:
pH: 0.00 to 14.00 pH | Temperature: -5 to 104°C (23 to 104°F)
|
Measurement parameters:
pH | Temperature
This Meter is a specialist food pH meter and probe combination specifically designed for the pH analysis of semi-solid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.AccuracyWith two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration.The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.Special features:- Fast easy to read results with large digital LCD readout- Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)- Lightweight and portable- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize- Simple push button, automatic two-point calibration for increased accuracy- Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage- Rugged stainless temperature probe- 3 feet probe cables for extra flexibility when testing- Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)
€272.60*
Milwaukee MW105 MAX Waterproof pH / ORP / Temp Portable Meter
Product number:
895557
Measuring range:
pH: -2.00 to 20.00 | ORP: ±2000mV | Temperatur: -20.0 to 120.0°C / -4.0 to 248.0°F
|
Measurement parameters:
pH, Redox, Temperatur
The MW105 MAX meter combines all the features of a benchtop meter in an IP67-rated portable meter.The units are equipped with a range of new diagnostic functions that improve the reliability of pH measurement:Waterproof IP67 housingExtended pH range: -2.00 to 20.00 pHUp to 3-point automatic pH calibration, 7 standard calibration buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45)alphanumeric LCD display for user-friendly, intuitive information, warning and error messagesautomatic switch-off function to conserve battery powerinternal clock and date for monitoring various time-dependent functions (calibration timestamp, calibration timeout)Special GLP button
€375.70*
Milwaukee MW106 MAX Waterproof pH / ORP / Temp Portable Meter
Product number:
895558
Measuring range:
pH: -2.00 to 20.00 pH / -2.000 to 20.000 pH | ORP: ±2000.0mV | Temperature: -20.0 to 120.00°C (-4.0 to 248.0°F)
|
Measurement parameters:
pH, ORP, Temperatur
The MW106 MAX meter combines all the features of a benchtop meter in an IP67 portable meter.The meter is equipped with a range of new diagnostic functions that improve the reliability of pH measurement.Hand carrying caseEach meter is supplied in a hard carrying case, ideal for on-site measurements.
€389.00*
Milwaukee MW306 MAX, Automatic and logging EC/TDS/NaCl/Temperature meter.
Product number:
895564
Measuring range:
EC Range: 0.00 to 29.99 uS/cm / 3.0 to 29.9 uS/cm | EC Range: 30.0 to 299.9 uS/cm / 300 to 2999 uS/cm | EC Range: 3.00 to 29.99 mS/cm / 30.0 to 200.0 mS/cm / up to 500.0 mS/cm, absolute conductivity* | TDS Range: 0.00 to 14.99 ppm (mg/L) | TDS Range: 15.0 to 149.9 ppm (mg/L) / 150 to 1499 ppm (mg/L) | TDS Range: 1.50 to 14.99 g/L / 15.0 to 100.0 g/l / up to 400.0 g/L absolute TDS* (with 0.80 factor) | Salinity Range: 0.0 to 400.0 %NaCl / 2.00 to 42.00 PSU | Salinity Range: 0.00 to 80.00 g/L | Temp. Range: -20.0 to 120.00°C (-4.0 to 248.0°F)
|
Measurement parameters:
EC (Electrical Conductivity), TDS (Total Dissolved Solids), NaCl (Salinity), Temperature
The portable 4-in-1 MW306 PRO conductivity/TDS/NaCl (salinity)/temperature meter has won many fans worldwide with its reliable fast and easy operation. It is also very rugged and has IP67 waterproof rating.
It has a user-friendly interface for data exchange and as mentioned at the beginning, it is designed to measure four different parameters of water.
Ideal for use in hydroponics, horticulture, laboratories, food processing, water treatment and many other applications with demanding measurement requirements.
€510.40*
Milwaukee MW801 PRO, 3-in-1 pH/EC/TDS meter
Product number:
895569
Measuring range:
pH: 0.0 to 14.0 pH | EC: 0 to 1990 µS/cm | TDS: 0 to 1990 ppm
|
Measurement parameters:
pH, EC (Electrical Conductivity), TDS (Total Dissolved Solids)
This 3-in-1 low range combination meter allows you to measure pH, EC (conductivity) and TDS with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1382 ppm calibration solution, a 9 V battery and instructions.
€249.10*
Milwaukee MW802 PRO, 3-in-1 pH/EC/TDS meter
Product number:
895570
Measuring range:
pH: 0.00 to 14.00 pH | EC: 0.00 to 6.00 mS/cm | TDS: 0 to 4000 ppm
|
Measurement parameters:
pH, EC (Electrical Conductivity), TDS (Total Dissolved Solids)
This 3-in-1 combination meter allows you to measure pH, EC high range (conductivity) and TDS high range with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1500 ppm calibration solution, a 9 V battery and instructions.
€249.10*
Milwaukee MW803 waterproof low range pH / EC / TDS /Temperature Tester with replaceable probe
Product number:
895518
Measuring range:
0.00 to 14.00 pH | 0 to 3999 µS/cm | 0 to 2000 ppm TDS | 0,0 to 50.0 °C
|
Measurement parameters:
pH | Conductivity (EC) | TDS (total dissolved solids) | Temperature
€186.30*
Milwaukee MW804 waterproof high range pH / EC / TDS /Temperature Tester with replaceable probe
Product number:
895519
Measuring range:
0.00 to 14.00 pH | 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt TDS | 0,0 to 50.0 °C
|
Measurement parameters:
pH | Conductivity (EC) | TDS (total dissolved solids) | Temperature
€186.30*
Milwaukee MW805 4-in-1 pH/EC/TDS/Temp. Combo Meter with ATC
Product number:
896147
Measuring range:
-2.00 - 20.00 pH | 0 - 4000 µS/cm | 0 - 2000 ppm (mg/L) | -20.0 to 120.0°C (-4.0 to 248.0°F)
|
Measurement parameters:
pH | Conductivity | TDS | Temperature
This MW805 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from .40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852D/1 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
€388.50*
Milwaukee MW806 4-in-1 pH/EC/TDS/Temp. Combo Meter with ATC
Product number:
896146
Measuring range:
-2.00-20.00 pH | 0.00-20.00 mS/cm | 0.00-10.00 ppt (g/L) | up to 16.00 ppt (g/L) with TDS 0.80 factor | -20.0 to 120.0°C (-4.0 to 248.0°F)
|
Measurement parameters:
pH | Conductivity | TDS | Temperature
This High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from 0.40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutionsGel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
€388.50*
Milwaukee PH58 waterproof pH / ORP / Temperature Tester with automatic temperature compensation (ATC) and replaceable probe
Product number:
895517
Measuring range:
-2.00 to 16.00 pH | ±1000mV ORP | -5.0 to 60.0 °C
|
Measurement parameters:
pH | ORP |Temperature
€186.30*