Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736

Frequently Asked Questions What do I need this meter for in everyday life? It measures the conductivity of liquids, e.g. in water treatment, laboratories or hydroponics. Is the device easy to use, even for beginners? Yes, it has a simple design and shows the reading directly on the display. Can I use the device in water? Yes, it is waterproof and can be submerged in liquids without any problems. What does automatic temperature compensation mean? The device automatically adjusts readings to the water temperature for more accurate results. Will I need to replace the electrode at some point? Yes, the electrode is replaceable and can be changed when necessary. For which applications is the meter particularly suitable? Ideal for aquariums, hydroponics, swimming pools and general water analysis.

Frequently Asked Questions What exactly is this meter used for? It measures high conductivity levels in water, for example in industry, agriculture or water treatment. Can I use it to measure water with a high mineral content? Yes, the meter is designed specifically for this purpose and delivers reliable results even at high levels. Is the meter suitable for outdoor use? Yes, it is waterproof and can be used in the field or on the go without any problems. Do I need to take the temperature into account when measuring? No, the automatic temperature compensation takes care of that for you. Can the measuring tip be replaced if necessary? Yes, the electrode can be easily replaced when it is worn out. Who would particularly benefit from this device? Anyone who needs to regularly check water quality with higher readings.

Frequently Asked Questions What does a TDS meter actually measure? A TDS meter measures the electrical conductivity of the water, which is caused by dissolved substances. This is used to calculate a value for the total amount of dissolved solids. It is important to note that the meter only displays the quantity of dissolved substances, not their type or purity. A high TDS value therefore does not automatically mean that the water is contaminated or unhealthy – nor does a low value guarantee that the water is free from pollutants. Measurement range: 0 to 1990 ppm (mg/l) What does TDS mean? What is ppm? TDS stands for Total Dissolved Solids – that is, the total amount of all dissolved solids in the water. These include minerals, salts, metals and organic substances dissolved in the water. The concentration of these dissolved substances is given in milligrams per litre (mg/L) or parts per million (ppm). Is it easy to use, even for beginners? Yes. Switch it on, dip it in the water and read the value straight away – no prior knowledge required. How accurate are the measurement results? For everyday use, the readings are reliable and provide a good indication of water quality. Can I use the tester when I’m out and about? Yes, the device is compact, lightweight and fits easily into any bag. Who would particularly benefit from buying this? Ideal for anyone who wants to check their water quality quickly and easily themselves.

Frequently Asked Questions How do I measure water quality correctly with this device? Simply hold it in the water, wait a moment, and read the EC value straight away. What can I use the EC Pen for? Ideal for plants, hydroponics, aquariums and general water monitoring. Is it easy for beginners to use? Yes, the device is very simple to use and ready for immediate use. Do I need to calibrate the tester regularly? Yes, regular calibration ensures consistently accurate results. How quickly does the device display a result? The measurement is taken in a few seconds immediately after immersion. Is the Milwaukee CD601 Digital Conductivity Pen (EC) robust enough for daily use? Yes, it is designed for regular use and withstands typical everyday wear and tear well.

Frequently Asked Questions What does the Milwaukee CD610 TDS tester measure? The Milwaukee CD610 measures the total dissolved solids (TDS) content in water. It records the total amount of substances dissolved in the water and displays the value in ppm (parts per million) or mg/L. The measuring range extends from 0 to 10,000 ppm, making it suitable even for water with a higher mineral or salt content. Can I use it to check water quality quickly? Yes, the device provides a reading within a few seconds, saving you the hassle of time-consuming water tests. What applications is the meter suitable for? Ideal for drinking water, aquariums, ponds, hydroponics, swimming pools and many other water applications. Do I need experience with such meters? No, it is easy to use and straightforward even for beginners. Can I use the device on the go? Yes, thanks to its compact pen-like shape, it fits comfortably in a pocket or toolbox. How do I read the result? The measurement is shown directly on the digital display and is easy to read. Why is a digital meter better than test strips? You get quick, accurate results without having to compare colours or make estimates. Is the device also suitable for water with a high mineral content? Yes, it has been specially developed for higher measurement ranges and is suitable for many types of water.

Frequently Asked Questions Can I check the water parameters on the spot? Yes, this compact device is ideal for quick measurements on the go. What water applications is the tester suitable for? It is suitable for aquariums, hydroponics, swimming pools and many other areas. Do I need to buy several devices for different measurements? No, the tester measures several key water parameters in a single device. It combines EC, TDS and temperature measurements in a waterproof unit and offers automatic temperature compensation. Measurement parameters: Conductivity (high range) | TDS (total dissolved solids) | Temperature Measuring range: 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt (= 10,000 ppm) TDS | 0.0 to 60.0 °C How easy is it to use on a daily basis? Measurements can be taken in just a few simple steps and the display is easy to read. What happens if the probe wears out? The probe can be replaced without having to replace the entire device. Is the device splash-proof? Yes, the waterproof housing is designed for damp working environments. How quickly do I see the measurement result? The values are shown on the display within a few seconds.

Digital salinity refractometer for the rapid determination of salinity in liquids. Ideal for marine aquariums, aquaculture and water analysis, featuring automatic temperature compensation and a direct digital display. What role do salt concentrations play in a healthy marine environment? In the fields of marine aquariums, aquaculture and marine research, salinity is far more than just a numerical value – it forms the basis of life. Corals, fish and invertebrates thrive only within a precisely defined salinity range. Even small deviations can cause stress in marine organisms, disrupt their growth or lead to disease. Whether you are a passionate reef aquarist or the operator of a commercial breeding facility: it is absolutely essential that salinity is closely monitored! Milwaukee MA887 Digital Salinity Refractometer – Fast measurement results in a matter of seconds for a healthy marine environment The Milwaukee MA887 has been specially developed for the quick and easy determination of salinity in liquids. The digital refractometer determines the reading via the refractive index of the sample and displays the results directly on the screen. This eliminates the need for manual reading of a scale, as is required with traditional optical refractometers. The Milwaukee MA887 digital salinity refractometer puts an end to uncertainty in salinity measurement. Unlike manual optical refractometers, whose results depend on subjective readings and lighting conditions, the MA887 delivers digital precision, reliability and reproducible results in a matter of seconds. This device allows you to reliably monitor and maintain stable conditions in seawater, thanks to its display in PSU (Practical Salinity Units), ppt (parts per thousand) and specific gravity. Designed for professionals and serious aquarists, the MA887 uses optical technology and automatic temperature compensation (ATC) to deliver precise readings – even when sample temperatures vary. As just a few drops of sample water are sufficient for a laboratory-quality measurement, the device is indispensable for reef aquarium owners, aquaculture operators and marine researchers. The device is particularly popular with saltwater aquarium owners, as salinity has a decisive influence on the well-being of many marine creatures. With the MA887, salinity can be checked in a matter of seconds, simplifying regular monitoring in aquarium operations. Its robust construction and digital data recording make the MA887 a practical tool for aquatics, laboratories and water analysis. Why should I use a Milwaukee MA887 digital salinity refractometer – the benefits for you Digital precision you can trust – Manual interpretation is a thing of the past. For fast and consistent results, the MA887 delivers precise readings with an accuracy of ±2 ppt. No manual scale reading required Flexible 3-in-1 measurement – Salinity can be displayed in ppt, PSU or as specific gravity (20/20), adapting to different requirements in marine aquariums and other applications. Automatic temperature compensation (ATC) – You don’t need to worry that temperature fluctuations might affect your results. ATC ensures precision even when temperatures vary. Quick and easy to use: Simply place a few drops of water on the prism, close the lid and read the result on the digital display within seconds. Minimal sample volume – Only 100 µL of water is required to perform the measurement – perfect for reef aquariums or systems with low water volume. Robust design – Durability thanks to a stainless steel sample well and sturdy construction, suitable for daily use in challenging environments. Versatile applications – Ideal for marine aquariums, coral care, aquaculture, shrimp farming, saltwater enrichment and laboratory testing. Typical applications of the MA887 digital salinity refractometer Aquaculture Monitoring salinity in fish farming facilities to support optimal growth and reproductive conditions. Maintaining consistent water quality to minimise stress factors and reduce the risk of disease in fish. Marine aquariums and reef aquariums Monitoring and maintaining the optimal salinity for corals, invertebrates and marine fish. Supporting stable water conditions to promote effective biological filtration and a balanced marine ecosystem. Laboratories Precise determination and reliable reproducibility of water analyses for research and investigative purposes. Suitable for applications in marine biology, oceanography and environmental science research. Mixing and treating seawater Monitoring the salinity during the production of artificial seawater for aquariums, test facilities or research purposes. Helping to maintain consistent water parameters during water changes and the regular maintenance of saltwater aquariums. Industrial applications Monitoring of salinity as part of quality control during seawater treatment and the production of brine solutions. Checking and monitoring of salt concentration in cooling systems, cooling towers and seawater desalination plants. Shrimp and crustacean farming Monitoring and adjustment of salinity in hatcheries, rearing and holding facilities for crustaceans. Promotion of suitable conditions for shell development and for key metabolic processes in prawns and other crustaceans. Aquaponics and salt-tolerant systems Monitoring of salinity in aquaponics systems operated with brackish water organisms or salt-tolerant species. Choose the Milwaukee MA887 digital salinity refractometer – fast, accurate readings for a stable and healthy marine environment With the Milwaukee MA887 digital salinity refractometer, you can maintain the delicate balance of your saltwater ecosystem – combining precision with ease of use. Whether you’re preserving colourful coral reefs or managing efficient aquaculture systems, the MA887 provides reliable salinity readings at all times. Care and Maintenance Instructions To ensure your MA887 always delivers optimal results: Rinse after each use – To prevent salt deposits or residues, clean the prism and sample well with distilled or deionised water. Avoid contamination – Ensure that no oils, chemicals or residues enter the sample chamber. Use clean pipettes or droppers to take samples. Check calibration before use – Use deionised or distilled water to check the zero point and ensure accurate readings – particularly when measuring in different salinity ranges. Store safely – When the device is not in use, it should be stored in a clean, protected and dry place. Avoid extreme temperatures or high humidity. Contents Milwaukee MA887 digital salinity refractometer 9V battery User manual Frequently Asked Questions Is the device suitable for my saltwater aquarium? Yes, the MA887 was specifically designed for the precise monitoring of salinity in saltwater aquariums. How quickly do I get a measurement result? The result appears on the display in less than 2 seconds. How much water do I need for a measurement? Just 2 to 3 drops of water are sufficient for a reliable measurement. Do I need to take the water temperature into account? No, the device automatically compensates for temperature fluctuations to ensure reliable readings. Is calibration complicated? No, calibration is quick and easy using distilled or deionized water. Are the readings easy to read? Yes, the measurement results are clearly displayed on the digital screen. Why is the MA887 more practical than an optical refractometer? You get digital results without having to guess or struggle to read through an eyepiece.

A precise pH and temperature meter featuring automatic temperature compensation (ATC), automatic calibration, and an extended pH measurement range. The Milwaukee MW102 PRO+ stands out for its high measurement accuracy and ease of use. Milwaukee MW102 PRO+ portable pH and temperature meter for fast and reliable results The Milwaukee MW102 PRO+ is a microprocessor-controlled meter designed for the precise determination of pH and temperature. By combining both measurement parameters with automatic temperature compensation (ATC) and high accuracy, the device is suitable for demanding applications in laboratories and water analysis. Compared to basic pH meters, the MW102 PRO+ offers an extended pH measurement range and superior accuracy, enabling reliable analysis of both acidic and alkaline solutions. The large digital LCD ensures readings are easy to view and supports simple operation during daily use. A key advantage of the MW102 PRO+ is its automatic temperature compensation. It automatically accounts for temperature-related effects on pH readings, ensuring precise and reliable results even when sample temperatures fluctuate. The included temperature probe also allows for the direct measurement of the sample temperature. For simple and secure calibration, the device features automatic one- or two-point calibration. Calibration is conveniently performed at the touch of a button, facilitating quick setup and ensuring measurement reliability. The package includes a high-quality, gel-filled, double-junction pH electrode of laboratory grade. It is characterized by low maintenance requirements and reliable performance. The system is complemented by a robust stainless-steel temperature probe designed for daily use. Thanks to the flexible probe cable, measurements can be conveniently performed even in hard-to-reach sample containers. Its compact design and low weight make the MW102 PRO+ a practical companion for both mobile and stationary applications. The automatic shut-off function reduces energy consumption and contributes to long battery life. This makes the device suitable for regular measurements over extended periods. Technical Data Measurement parameters: pH | Temperature Measurement range: pH range: -2.00 to 16.00 pH | Temperature range: -5 to 70°C Calibration: Automatic Accuracy: ±0.02 pH Temperature compensation: Automatic Key Benefits at a Glance Simultaneous measurement of pH and temperature High measurement accuracy and fine resolution Gel-filled pH electrode with double junction Rugged stainless steel temperature probe Automatic shut-off function Typical Applications Water analysis Laboratory applications Research and development Environmental analysis Quality control Scope of Delivery Milwaukee MW102 PRO+ meter SE220 pH electrode MA831R temperature probe 9 V battery User manual Frequently Asked Questions Does the device also measure temperature? Yes, in addition to the pH value, the MW102 PRO+ also measures the temperature of the sample. Do I need to take the temperature into account myself when taking a measurement? No, the device automatically adjusts the readings to account for the temperature. Is the meter suitable for brewing, wine-making or hydroponics? Yes, the MW102 PRO+ was developed specifically for such applications. How accurate are the measurement results in everyday use? The device provides very precise and reliable readings, even in demanding applications. Is calibration complicated? No, automatic calibration is quick and easy to perform. Can I use the device regularly whilst on the move? Yes, the MW102 PRO+ is robust, easy to transport and suitable for mobile use. What makes this model better than basic pH meters? It measures more accurately, automatically takes temperature into account and delivers particularly stable results.

MW401 is a portable TDS meter with automatic temperature compensation and low range.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.In water treatment, high TDS can affect the clarity and taste of drinking water.The MW401 has a measuring range of 0 to 1990 mg/L (ppm) with a resolution of 10 mg/L (ppm).This meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution. Frequently Asked Questions What can I use this tester for? Ideal for testing drinking water, aquariums, reverse osmosis systems and other water applications. How quickly do I get a reading? The result appears on the display within a few seconds. Is the device suitable for beginners? Yes, it is straightforward to use and requires no prior knowledge. Can I detect changes in water quality? Yes, regular measurements help to identify changes quickly. Do I have to calculate the values myself? No, the device displays the measurement directly and clearly. Is the meter suitable for regular checks? Yes, it has been designed for frequent and reliable measurements. Why should I use a digital meter? You get quick results and avoid inaccurate estimates or colour comparisons.

MW402 is a high range (TDS) portable conductivity meter with automatic temperature compensation.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.A high TDS value can affect the clarity and taste of drinking water.The MW402 has a measuring range of 0.0 to 10.0 g/L (ppt) with a resolution of 0.1 g/L (ppt).This TDS meter comes complete with conductivity probe with 1 meter (3.3') cable and a calibration solution. Frequently Asked Questions What types of water samples is this meter suitable for? Ideal for water with a higher mineral or salt content, as well as many technical applications. Can I check the water quality quickly? Yes, the meter provides an easy-to-read reading within a few seconds. Is the meter suitable for regular measurements? Yes, it has been designed for frequent use and reliable results. Do I need experience with this type of equipment? No, it is easy to use and well suited even for beginners. Can I use the device in different locations? Yes, thanks to its compact design, it is easy to transport. How can I detect changes in the water? Regular measurements allow deviations to be identified quickly. Why is a digital measuring device worth it? You get quick results and avoid inaccurate estimates or comparisons.

Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature, featuring automatic temperature compensation (ATC) and a replaceable electrode. The Milwaukee MW803 was specifically designed for applications in the low conductivity range. Milwaukee MW803 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW803 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into one compact unit, the meter is ideal for users who need to monitor water quality quickly and reliably without relying on multiple separate devices. The MW803 was specifically developed for low-conductivity applications. This makes the device particularly suitable for hydroponics, drinking water analysis, aquarium maintenance, and other applications involving low salt and mineral concentrations. Simultaneous measurement of multiple parameters simplifies water quality assessment and supports efficient monitoring of water and nutrient solutions. To ensure precise results, the meter features automatic temperature compensation (ATC). Temperature-related fluctuations are automatically accounted for during conductivity and TDS measurements, ensuring reliable readings even under changing environmental conditions. Additionally, the integrated temperature sensor allows for direct monitoring of the sample temperature. Another advantage of the Milwaukee MW803 is its replaceable electrode. Should the electrode wear out or its performance decline, it can be replaced without needing to discard the entire meter. This reduces long-term costs and significantly extends the device's service life. Automatic calibration ensures simple and convenient setup. One- or two-point calibration options are available for pH measurements, while conductivity measurement utilizes automatic single-point calibration. This allows the device to be quickly adapted to various measurement requirements. The waterproof housing protects the meter during use in damp environments, making the MW803 a reliable solution for both mobile and stationary applications. Its robust construction and ease of use make the device an attractive choice for both professional users and demanding hobbyists. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0 to 3999 µS/cm | 0 to 2000 ppm (mg/L) TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Resolution: 0.01 pH | 1 µS/cm | 1 ppm | 0.1 °C (0.1 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale | ±0.5 °C (±1 °F) Calibration: Automatic Temperature compensation: Automatic (ATC) Key Benefits at a Glance Simultaneous measurement of pH, conductivity, TDS, and temperature Specially designed for low-conductivity applications Automatic temperature compensation Automatic calibration functions Reliable monitoring of multiple water parameters with a single device Typical Applications Drinking water analysis Aquariums Water treatment Laboratory applications Nutrient solutions General water analysis Scope of Delivery Milwaukee MW803 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Can I check multiple water parameters simultaneously with this device? Yes, you can measure pH, conductivity, TDS, and temperature with a single device. Is the meter suitable for aquariums and ponds? Yes, it helps you quickly check key water parameters and detect changes early on. Can I replace the probe if it wears out? Yes, the pH probe is replaceable, allowing you to continue using the device for a long time. Is the device suitable for outdoor use? Yes, the housing is waterproof and designed for both humid environments and outdoor use. Do I need to account for temperature myself when taking measurements? No, the device automatically compensates for temperature fluctuations to ensure reliable results. Is it easy for beginners to use? Yes, the measurement process is straightforward, and the readings are displayed directly on the screen. What applications is this meter best suited for? It is ideal for hydroponics, aquariums, pools, drinking water testing, and many other water analysis applications.

Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature. The Milwaukee MW804 was specifically designed for applications involving higher conductivity and TDS levels and features automatic temperature compensation (ATC), automatic calibration, and a replaceable electrode. Milwaukee MW804 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW804 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into a single device, the meter is ideally suited for applications requiring reliable monitoring of water quality and mineral content. Compared to the Milwaukee MW803, the MW804 was developed for applications with higher conductivity and TDS levels. This makes the device particularly suitable for use in agriculture, aquaculture, and water treatment, as well as in applications involving elevated salt and mineral concentrations. Simultaneous parameter monitoring enables a comprehensive assessment of water quality and reduces the effort required for individual measurements. To ensure reliable results, the MW804 features automatic temperature compensation (ATC). Temperature-related effects on conductivity and TDS measurements are automatically accounted for, ensuring consistent readings even under changing environmental conditions. Additionally, the sample temperature can be directly measured and monitored. The replaceable electrode ensures a long service life and cost-effective maintenance. Should the electrode wear out or sensor performance decline, it can be replaced without needing to replace the entire meter. This reduces ongoing costs and simplifies device maintenance. Automatic calibration facilitates quick and convenient setup. One- or two-point calibration is available for pH measurement, while conductivity measurement utilizes automatic one-point calibration. This allows the device to be easily adapted to various measurement tasks. Thanks to its waterproof housing, the MW804 is suitable for both laboratory use and mobile outdoor measurements. Its robust construction and ease of use make it a reliable solution for professional users and demanding monitoring applications. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale Calibration: Automatic Temperature compensation: Automatic Key benefits at a glance Simultaneous measurement of pH, conductivity, TDS, and temperature Designed for applications with higher conductivity and TDS levels Automatic temperature compensation Automatic calibration functions Suitable for portable and stationary applications Typical applications Agriculture Aquaculture Water treatment Process water monitoring Nutrient solutions Laboratory applications Scope of delivery Milwaukee MW804 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Is the device suitable for water with high mineral or nutrient concentrations? Yes, the MW804 is particularly well-suited for water with higher conductivity and TDS levels. Do I need multiple devices for different water parameters? No, pH, conductivity, TDS, and temperature are all measured with a single device. Is the meter suitable for hydroponics and nutrient solutions? Yes, it was designed to reliably monitor key water parameters in nutrient solutions. Can I replace the pH probe if necessary? Yes, the probe is replaceable. This saves costs in the long run and extends the device's service life. Is the device easy to use? Yes, the readings are clearly displayed, and the device is quick to learn. Can I use the meter outdoors? Yes, the robust, water-resistant housing makes it well-suited for outdoor use. Do I need to account for water temperature during measurement? No, the device automatically compensates for temperature fluctuations to ensure the most accurate readings possible.

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

IP Protection: IP67 Manufacturer article number: 50014153

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67Manufacturer article number: 50014163

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014203

Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank.  Your analysis case consists of the following components: 1x pocket tester  1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues  You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67 

IP Protection: IP67 With exchangeable probe  Manufacturer article number: 50014213