Mobile Sodium Ion Tester from Horiba with Temperature Measurement – precise and robust High-precision sodium ion tester with 2-point calibration – ideal for water and environmental analysis The Horiba LAQUAtwin Na-11 sodium ion tester was specifically designed for accurate measurement of sodium concentrations in a wide range of samples. The device enables direct on-site measurements. Its clear display shows both the Na⁺ concentration and the sample temperature in a single step, making field, laboratory, and greenhouse work significantly more efficient. Mobile sodium ion tester for precise on-site measurements Featuring 2-point calibration and automatic standard recognition (150 and 2000 ppm), the instrument can be easily adapted to different measurement requirements. The integrated temperature display and automatic temperature compensation ensure accurate results even under fluctuating environmental conditions. The robust IP67 housing is dustproof and waterproof, making the tester suitable for demanding daily use. With a battery life of approximately 400 hours, reliable long-term operation is ensured. The tester is supplied with standard solutions, sampling sheets, batteries, and matching pipettes for immediate use. Why sodium measurement matters – and why a handheld tester is the ideal solution Measuring sodium ions plays a crucial role in water, environmental, food, and agricultural analysis. Excessively high or low sodium concentrations can significantly affect water quality, soil structure, plant growth, and the quality of food products and drinking water. Regulatory limits and quality standards further require regular monitoring. A mobile sodium ion handheld tester enables fast and precise analysis directly at the point of use, without time-consuming sampling or laboratory analysis. The Horiba LAQUAtwin Na-11 combines this flexibility with high measurement accuracy and ease of use, making it ideal for routine monitoring, quality control, and research applications. Typical applications for the Horiba sodium ion tester Environmental monitoring: Measurement of sodium concentrations in surface and groundwater to assess water quality and ensure compliance with environmental standards. Food and beverage production: Testing sodium levels in food and beverages for quality assurance, product development, and regulatory compliance. Agriculture: Monitoring sodium content in irrigation water and soils to support plant health and optimize water management. Research & development: Use in laboratories for experimental studies on sodium ion behavior under varying conditions. Education: Utilized in schools and universities to demonstrate the use of ion-selective electrodes in analytical chemistry. Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.
Horiba Y046 Sampling Sheet B Contains 100 pcs. / boxuse for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract) for the latter, please use sampling sheet holder and cover the sensor during measurement for LAQUAtwin and Twin pocket meters, except conductivity and salt EC modelsManufacturer Part Nr. 3200053858
Horiba Y048 sample sheet holder for sample sheet B (sheet B is used for samples with particles)Manufacturer Part Nr. 3200459736
Waterproof conductivity meter with an extended measurement range, automatic temperature compensation, and a replaceable electrode. Suitable for applications in aquaristics, industry, water treatment, and environmental analysis. Milwaukee C66 Waterproof Conductivity Meter for High Ranges The Milwaukee C66 is designed for conductivity measurements in applications involving higher salt and mineral concentrations. This compact meter combines a rugged design with ease of use, making it suitable for both stationary use and on-site measurements. Automatic temperature compensation (ATC) accounts for temperature fluctuations during measurement, ensuring reliable conductivity readings. This makes the device suitable for various operating conditions and allows for use both indoors and outdoors. The replaceable electrode is a particularly practical feature. If electrode performance declines, the electrode can be replaced without needing to replace the entire meter. This contributes to cost-effective operation and a long service life for the device. Thanks to its extended measurement range, the Milwaukee C66 is suitable for applications in aquaristics, water treatment, and industrial sectors where higher conductivity levels may occur. Its compact, pen-style design ensures easy handling and convenient portability. Technical Data Measurement parameter: Conductivity Measurement range: 0.00 to 10.00 mS/cm Accuracy: EC: ±2% of full scale Temperature compensation: Automatic (ATC) Key Benefits at a Glance For conductivity measurements in higher ranges Waterproof housing for demanding operating conditions Replaceable electrode for long-term use of the device Compact and lightweight pen-style meter Simple calibration Suitable for mobile and stationary applications Typical Applications Aquaristics Water treatment Industrial applications Process control Environmental analysis Frequently Asked Questions What exactly is this meter used for? It measures high conductivity levels in water, for example in industry, agriculture or water treatment. Can I use it to measure water with a high mineral content? Yes, the meter is designed specifically for this purpose and delivers reliable results even at high levels. Is the meter suitable for outdoor use? Yes, it is waterproof and can be used in the field or on the go without any problems. Do I need to take the temperature into account when measuring? No, the automatic temperature compensation takes care of that for you. Can the measuring tip be replaced if necessary? Yes, the electrode can be easily replaced when it is worn out. Who would particularly benefit from this device? Anyone who needs to regularly check water quality with higher readings.
Frequently Asked Questions What does a TDS meter actually measure? A TDS meter measures the electrical conductivity of the water, which is caused by dissolved substances. This is used to calculate a value for the total amount of dissolved solids. It is important to note that the meter only displays the quantity of dissolved substances, not their type or purity. A high TDS value therefore does not automatically mean that the water is contaminated or unhealthy – nor does a low value guarantee that the water is free from pollutants. Measurement range: 0 to 1990 ppm (mg/l) What does TDS mean? What is ppm? TDS stands for Total Dissolved Solids – that is, the total amount of all dissolved solids in the water. These include minerals, salts, metals and organic substances dissolved in the water. The concentration of these dissolved substances is given in milligrams per litre (mg/L) or parts per million (ppm). Is it easy to use, even for beginners? Yes. Switch it on, dip it in the water and read the value straight away – no prior knowledge required. How accurate are the measurement results? For everyday use, the readings are reliable and provide a good indication of water quality. Can I use the tester when I’m out and about? Yes, the device is compact, lightweight and fits easily into any bag. Who would particularly benefit from buying this? Ideal for anyone who wants to check their water quality quickly and easily themselves.
Compact conductivity tester for the rapid measurement of electrical conductivity in water samples. Features automatic temperature compensation, simple calibration, and a handy pen-style design for mobile use and routine checks. Milwaukee CD601 Digital Conductivity Tester – Simple, precise, pocket-sized EC measurement The Milwaukee CD601 is a compact conductivity tester designed for quick water quality checks. Its handy pen-style format makes it ideal for mobile use, allowing for easy on-site determination of electrical conductivity. Automatic temperature compensation (ATC) accounts for temperature fluctuations during measurement, ensuring convenient operation in various environments. Single-point calibration allows for straightforward setup and simplifies regular accuracy checks. Its robust design makes the tester suitable for both daily use and occasional spot checks. The device is particularly appealing to users who need a quick and easy way to assess the conductivity of water samples. The CD601 is used in a wide range of fields, including aquaristics, aquaculture, water treatment, and education. This compact meter is also a practical tool for routine checks of process water or drinking water. Technical Data Measurement parameter: Conductivity Measurement range: 0 to 1990 µS/cm Resolution: 10 µS/cm Accuracy: EC: ±2% of full scale Temperature compensation: Automatic 5 to 50 °C (41 to 122 °F) Your Benefits at a Glance Compact pen-style design for mobile measurements Rapid determination of electrical conductivity Automatic temperature compensation (ATC) Simple 1-point calibration Suitable for a wide range of water applications Typical Areas of Application Aquaristics Aquaculture and coral farming Water treatment Beverage industry Swimming pools Schools and educational institutions Water conditioning Frequently Asked Questions How do I measure water quality correctly with this device? Simply hold it in the water, wait a moment, and read the EC value straight away. What can I use the EC Pen for? Ideal for plants, hydroponics, aquariums and general water monitoring. Is it easy for beginners to use? Yes, the device is very simple to use and ready for immediate use. Do I need to calibrate the tester regularly? Yes, regular calibration ensures consistently accurate results. How quickly does the device display a result? The measurement is taken in a few seconds immediately after immersion. Is the Milwaukee CD601 Digital Conductivity Pen (EC) robust enough for daily use? Yes, it is designed for regular use and withstands typical everyday wear and tear well.
Compact conductivity tester for measurements in the medium-to-high conductivity range. Features automatic temperature compensation, a rugged design, and simple operation for laboratory, water analysis, and mobile applications. Milwaukee CD611 Conductivity Tester – Reliable, simple, and precise EC measurement The Milwaukee CD611 is a compact conductivity tester designed for the reliable measurement of electrical conductivity in water samples with medium-to-high conductivity levels. Its ease of use makes the device suitable for both regular spot checks and mobile field applications. Integrated automatic temperature compensation accounts for temperature fluctuations during measurement, ensuring consistent readings. This allows the tester to be used in various environments without the need for manual temperature corrections. Thanks to its rugged construction, the CD611 is built for daily use. Its compact size ensures easy portability, making it a practical solution for users who need quick measurement results directly on-site. Whether in the laboratory, during water analysis, or for routine checks in technical systems, the Milwaukee CD611 offers a straightforward way to monitor the conductivity of water samples. Technical Data Measurement parameter: Conductivity Measurement range: 0 to 20,000 µS/cm Accuracy: EC: ±2% of full scale Temperature compensation: Automatic Key Benefits at a Glance For conductivity measurements in the medium-to-high range Simple and convenient operation Compact design for mobile applications Rugged build for daily use Typical Applications Water analysis Laboratory applications Water treatment Process control Frequently Asked Questions How can I measure the EC value in water quickly and easily? Simply dip it into the sample, wait a moment, and read the value straight away. What can I use the EC Pen for? Ideal for plant care, hydroponics, aquariums and general water testing. Can I use it without any prior knowledge? Yes, the device is very straightforward and ready to use straight away. How accurate are the readings in everyday use? The readings are reliable and well suited for regular checks. How often should I calibrate the device? Regular calibration ensures consistently accurate results. For which liquids can I use the meter? It is suitable for many water-based solutions where conductivity needs to be tested. Can I read the values directly on the display? Yes, the display shows the measurement results clearly and legibly. Is the Milwaukee CD611 conductivity tester also suitable for use on the go? Yes, thanks to its compact design, it fits easily into any bag. How quickly do I get a measurement result? The reading is usually displayed within a few seconds. Who is the Milwaukee CD611 particularly suitable for? For anyone who wants to check conductivity values easily, quickly and reliably.
Waterproof multifunction meter for measuring conductivity, TDS, and temperature. Features automatic temperature compensation, a replaceable probe, and simple calibration for various applications. Milwaukee EC59 Waterproof Conductivity, TDS, and Temperature Meter – Precision and reliability for all water quality monitoring applications. The Milwaukee EC59 combines conductivity (EC), TDS, and temperature measurements into a single, compact handheld device. By integrating multiple measurement parameters, it is ideal for users who need to assess water quality quickly and easily without carrying multiple instruments. Automatic temperature compensation ensures reliable readings even when temperatures fluctuate. Additionally, automatic 1-point calibration allows for easy setup and regular accuracy checks, making the meter suitable for both beginners and experienced users. A key advantage of the EC59 is its replaceable electrode. The electrode can be swapped out if it wears down or performance declines, thereby extending the device's service life. Its robust, waterproof housing makes it a reliable tool for use in laboratories, greenhouses, or directly in the field. By simultaneously measuring conductivity, TDS, and temperature, the Milwaukee EC59 is suitable for a wide range of water quality monitoring and control applications. Technical Specifications Measurement parameters: Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0 to 3999 µS/cm | 0 to 2000 ppm TDS | 0.0 to 60.0 °C (32.0 to 140.0 °F) Resolution: 1 µS/cm / 1 ppm / 0.1 °C / 0.1 °F Accuracy (EC/TDS/Temp.): 2% of full scale | +/-0.5 °C (+/-1 °F) Temperature compensation: Automatic Key benefits at a glance Measurement of conductivity, TDS, and temperature with a single device Waterproof housing for daily use Replaceable electrode for extended service life Compact and user-friendly design Ideal for portable and stationary measurements Typical applications Water treatment Aquaculture Hydroponics Laboratory applications Environmental analysis Frequently Asked Questions Can I use the device even if I have no prior knowledge? Yes, it is easy to use and the readings can be taken quickly. What can I actually measure with this tester? You can check the water quality based on conductivity, TDS value and temperature. Is the device suitable for outdoor use? Yes, the waterproof housing protects the device when used in damp environments. Will I need to replace the probe at some point? Yes, the probe is replaceable and can be replaced if necessary. How quickly do I get a measurement result? The measurement is taken within a few seconds of immersion in water. For which applications is the device particularly suitable? It is suitable for aquariums, hydroponics, swimming pools and many other water-related applications. Is the device compact enough for use on the go? Yes, thanks to its handy size, it fits easily into a bag or toolbox.
Waterproof multifunction meter for measuring conductivity, TDS, and temperature in high ranges. Features automatic temperature compensation, a replaceable probe, and a rugged design suitable for applications in aquaculture, industry, water treatment, and food production. Milwaukee EC60 waterproof high-range conductivity, TDS, and temperature meter – Reliable water quality monitoring – anywhere you need it The Milwaukee EC60 was developed for applications requiring reliable measurement of higher conductivity and TDS levels. This compact meter combines conductivity, total dissolved solids (TDS), and temperature measurements into a single device, making it suitable for a wide range of applications. Its extended measurement range makes the EC60 particularly well-suited for samples with high salt or mineral concentrations. Automatic temperature compensation accounts for temperature fluctuations during measurement, ensuring consistent results. Its rugged, waterproof design allows for both indoor and outdoor use. Automatic 1-point calibration ensures quick setup and easy maintenance. The replaceable probe further extends the meter's service life and helps reduce long-term costs. By simultaneously measuring conductivity, TDS, and temperature, the Milwaukee EC60 offers a practical solution for users who need to monitor multiple water parameters with a single device. Technical Specifications Measurement parameters: Conductivity (High range) | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt (= 10,000 ppm) TDS | 0.0 to 60.0 °C Resolution: 0.01 mS/cm / 0.01 ppt / 0.1 °C / 0.1 °F Temperature compensation: Automatic Key benefits at a glance Designed for higher conductivity and TDS ranges Waterproof housing for daily use Automatic temperature compensation Replaceable probe for extended service life Compact and user-friendly design Typical applications Aquaculture and coral farming Beverage industry Food production Swimming pool technology Hydroponics Water treatment Frequently Asked Questions Can I check the water parameters on the spot? Yes, this compact device is ideal for quick measurements on the go. What water applications is the tester suitable for? It is suitable for aquariums, hydroponics, swimming pools and many other areas. Do I need to buy several devices for different measurements? No, the tester measures several key water parameters in a single device. It combines EC, TDS and temperature measurements in a waterproof unit and offers automatic temperature compensation. Measurement parameters: Conductivity (high range) | TDS (total dissolved solids) | Temperature Measuring range: 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt (= 10,000 ppm) TDS | 0.0 to 60.0 °C How easy is it to use on a daily basis? Measurements can be taken in just a few simple steps and the display is easy to read. What happens if the probe wears out? The probe can be replaced without having to replace the entire device. Is the device splash-proof? Yes, the waterproof housing is designed for damp working environments. How quickly do I see the measurement result? The values are shown on the display within a few seconds.
Digital salinity refractometer for the rapid determination of salinity in liquids. Ideal for marine aquariums, aquaculture and water analysis, featuring automatic temperature compensation and a direct digital display. What role do salt concentrations play in a healthy marine environment? In the fields of marine aquariums, aquaculture and marine research, salinity is far more than just a numerical value – it forms the basis of life. Corals, fish and invertebrates thrive only within a precisely defined salinity range. Even small deviations can cause stress in marine organisms, disrupt their growth or lead to disease. Whether you are a passionate reef aquarist or the operator of a commercial breeding facility: it is absolutely essential that salinity is closely monitored! Milwaukee MA887 Digital Salinity Refractometer – Fast measurement results in a matter of seconds for a healthy marine environment The Milwaukee MA887 has been specially developed for the quick and easy determination of salinity in liquids. The digital refractometer determines the reading via the refractive index of the sample and displays the results directly on the screen. This eliminates the need for manual reading of a scale, as is required with traditional optical refractometers. The Milwaukee MA887 digital salinity refractometer puts an end to uncertainty in salinity measurement. Unlike manual optical refractometers, whose results depend on subjective readings and lighting conditions, the MA887 delivers digital precision, reliability and reproducible results in a matter of seconds. This device allows you to reliably monitor and maintain stable conditions in seawater, thanks to its display in PSU (Practical Salinity Units), ppt (parts per thousand) and specific gravity. Designed for professionals and serious aquarists, the MA887 uses optical technology and automatic temperature compensation (ATC) to deliver precise readings – even when sample temperatures vary. As just a few drops of sample water are sufficient for a laboratory-quality measurement, the device is indispensable for reef aquarium owners, aquaculture operators and marine researchers. The device is particularly popular with saltwater aquarium owners, as salinity has a decisive influence on the well-being of many marine creatures. With the MA887, salinity can be checked in a matter of seconds, simplifying regular monitoring in aquarium operations. Its robust construction and digital data recording make the MA887 a practical tool for aquatics, laboratories and water analysis. Why should I use a Milwaukee MA887 digital salinity refractometer – the benefits for you Digital precision you can trust – Manual interpretation is a thing of the past. For fast and consistent results, the MA887 delivers precise readings with an accuracy of ±2 ppt. No manual scale reading required Flexible 3-in-1 measurement – Salinity can be displayed in ppt, PSU or as specific gravity (20/20), adapting to different requirements in marine aquariums and other applications. Automatic temperature compensation (ATC) – You don’t need to worry that temperature fluctuations might affect your results. ATC ensures precision even when temperatures vary. Quick and easy to use: Simply place a few drops of water on the prism, close the lid and read the result on the digital display within seconds. Minimal sample volume – Only 100 µL of water is required to perform the measurement – perfect for reef aquariums or systems with low water volume. Robust design – Durability thanks to a stainless steel sample well and sturdy construction, suitable for daily use in challenging environments. Versatile applications – Ideal for marine aquariums, coral care, aquaculture, shrimp farming, saltwater enrichment and laboratory testing. Typical applications of the MA887 digital salinity refractometer Aquaculture Monitoring salinity in fish farming facilities to support optimal growth and reproductive conditions. Maintaining consistent water quality to minimise stress factors and reduce the risk of disease in fish. Marine aquariums and reef aquariums Monitoring and maintaining the optimal salinity for corals, invertebrates and marine fish. Supporting stable water conditions to promote effective biological filtration and a balanced marine ecosystem. Laboratories Precise determination and reliable reproducibility of water analyses for research and investigative purposes. Suitable for applications in marine biology, oceanography and environmental science research. Mixing and treating seawater Monitoring the salinity during the production of artificial seawater for aquariums, test facilities or research purposes. Helping to maintain consistent water parameters during water changes and the regular maintenance of saltwater aquariums. Industrial applications Monitoring of salinity as part of quality control during seawater treatment and the production of brine solutions. Checking and monitoring of salt concentration in cooling systems, cooling towers and seawater desalination plants. Shrimp and crustacean farming Monitoring and adjustment of salinity in hatcheries, rearing and holding facilities for crustaceans. Promotion of suitable conditions for shell development and for key metabolic processes in prawns and other crustaceans. Aquaponics and salt-tolerant systems Monitoring of salinity in aquaponics systems operated with brackish water organisms or salt-tolerant species. Choose the Milwaukee MA887 digital salinity refractometer – fast, accurate readings for a stable and healthy marine environment With the Milwaukee MA887 digital salinity refractometer, you can maintain the delicate balance of your saltwater ecosystem – combining precision with ease of use. Whether you’re preserving colourful coral reefs or managing efficient aquaculture systems, the MA887 provides reliable salinity readings at all times. Care and Maintenance Instructions To ensure your MA887 always delivers optimal results: Rinse after each use – To prevent salt deposits or residues, clean the prism and sample well with distilled or deionised water. Avoid contamination – Ensure that no oils, chemicals or residues enter the sample chamber. Use clean pipettes or droppers to take samples. Check calibration before use – Use deionised or distilled water to check the zero point and ensure accurate readings – particularly when measuring in different salinity ranges. Store safely – When the device is not in use, it should be stored in a clean, protected and dry place. Avoid extreme temperatures or high humidity. Contents Milwaukee MA887 digital salinity refractometer 9V battery User manual Frequently Asked Questions Is the device suitable for my saltwater aquarium? Yes, the MA887 was specifically designed for the precise monitoring of salinity in saltwater aquariums. How quickly do I get a measurement result? The result appears on the display in less than 2 seconds. How much water do I need for a measurement? Just 2 to 3 drops of water are sufficient for a reliable measurement. Do I need to take the water temperature into account? No, the device automatically compensates for temperature fluctuations to ensure reliable readings. Is calibration complicated? No, calibration is quick and easy using distilled or deionized water. Are the readings easy to read? Yes, the measurement results are clearly displayed on the digital screen. Why is the MA887 more practical than an optical refractometer? You get digital results without having to guess or struggle to read through an eyepiece.
A precise pH and temperature meter featuring automatic temperature compensation (ATC), automatic calibration, and an extended pH measurement range. The Milwaukee MW102 PRO+ stands out for its high measurement accuracy and ease of use. Milwaukee MW102 PRO+ portable pH and temperature meter for fast and reliable results The Milwaukee MW102 PRO+ is a microprocessor-controlled meter designed for the precise determination of pH and temperature. By combining both measurement parameters with automatic temperature compensation (ATC) and high accuracy, the device is suitable for demanding applications in laboratories and water analysis. Compared to basic pH meters, the MW102 PRO+ offers an extended pH measurement range and superior accuracy, enabling reliable analysis of both acidic and alkaline solutions. The large digital LCD ensures readings are easy to view and supports simple operation during daily use. A key advantage of the MW102 PRO+ is its automatic temperature compensation. It automatically accounts for temperature-related effects on pH readings, ensuring precise and reliable results even when sample temperatures fluctuate. The included temperature probe also allows for the direct measurement of the sample temperature. For simple and secure calibration, the device features automatic one- or two-point calibration. Calibration is conveniently performed at the touch of a button, facilitating quick setup and ensuring measurement reliability. The package includes a high-quality, gel-filled, double-junction pH electrode of laboratory grade. It is characterized by low maintenance requirements and reliable performance. The system is complemented by a robust stainless-steel temperature probe designed for daily use. Thanks to the flexible probe cable, measurements can be conveniently performed even in hard-to-reach sample containers. Its compact design and low weight make the MW102 PRO+ a practical companion for both mobile and stationary applications. The automatic shut-off function reduces energy consumption and contributes to long battery life. This makes the device suitable for regular measurements over extended periods. Technical Data Measurement parameters: pH | Temperature Measurement range: pH range: -2.00 to 16.00 pH | Temperature range: -5 to 70°C Calibration: Automatic Accuracy: ±0.02 pH Temperature compensation: Automatic Key Benefits at a Glance Simultaneous measurement of pH and temperature High measurement accuracy and fine resolution Gel-filled pH electrode with double junction Rugged stainless steel temperature probe Automatic shut-off function Typical Applications Water analysis Laboratory applications Research and development Environmental analysis Quality control Scope of Delivery Milwaukee MW102 PRO+ meter SE220 pH electrode MA831R temperature probe 9 V battery User manual Frequently Asked Questions Does the device also measure temperature? Yes, in addition to the pH value, the MW102 PRO+ also measures the temperature of the sample. Do I need to take the temperature into account myself when taking a measurement? No, the device automatically adjusts the readings to account for the temperature. Is the meter suitable for brewing, wine-making or hydroponics? Yes, the MW102 PRO+ was developed specifically for such applications. How accurate are the measurement results in everyday use? The device provides very precise and reliable readings, even in demanding applications. Is calibration complicated? No, automatic calibration is quick and easy to perform. Can I use the device regularly whilst on the move? Yes, the MW102 PRO+ is robust, easy to transport and suitable for mobile use. What makes this model better than basic pH meters? It measures more accurately, automatically takes temperature into account and delivers particularly stable results.
MW401 is a portable TDS meter with automatic temperature compensation and low range.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.In water treatment, high TDS can affect the clarity and taste of drinking water.The MW401 has a measuring range of 0 to 1990 mg/L (ppm) with a resolution of 10 mg/L (ppm).This meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution. Frequently Asked Questions What can I use this tester for? Ideal for testing drinking water, aquariums, reverse osmosis systems and other water applications. How quickly do I get a reading? The result appears on the display within a few seconds. Is the device suitable for beginners? Yes, it is straightforward to use and requires no prior knowledge. Can I detect changes in water quality? Yes, regular measurements help to identify changes quickly. Do I have to calculate the values myself? No, the device displays the measurement directly and clearly. Is the meter suitable for regular checks? Yes, it has been designed for frequent and reliable measurements. Why should I use a digital meter? You get quick results and avoid inaccurate estimates or colour comparisons.
MW402 is a high range (TDS) portable conductivity meter with automatic temperature compensation.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.A high TDS value can affect the clarity and taste of drinking water.The MW402 has a measuring range of 0.0 to 10.0 g/L (ppt) with a resolution of 0.1 g/L (ppt).This TDS meter comes complete with conductivity probe with 1 meter (3.3') cable and a calibration solution. Frequently Asked Questions What types of water samples is this meter suitable for? Ideal for water with a higher mineral or salt content, as well as many technical applications. Can I check the water quality quickly? Yes, the meter provides an easy-to-read reading within a few seconds. Is the meter suitable for regular measurements? Yes, it has been designed for frequent use and reliable results. Do I need experience with this type of equipment? No, it is easy to use and well suited even for beginners. Can I use the device in different locations? Yes, thanks to its compact design, it is easy to transport. How can I detect changes in the water? Regular measurements allow deviations to be identified quickly. Why is a digital measuring device worth it? You get quick results and avoid inaccurate estimates or comparisons.
Waterproof multi-parameter meter for measuring pH, conductivity, TDS, and temperature. The Milwaukee MW804 was specifically designed for applications involving higher conductivity and TDS levels and features automatic temperature compensation (ATC), automatic calibration, and a replaceable electrode. Milwaukee MW804 Waterproof pH, Conductivity, TDS, and Temperature Meter – Compact All-in-One Meter The Milwaukee MW804 is a versatile multi-parameter meter for the simultaneous determination of pH, conductivity, TDS (Total Dissolved Solids), and temperature. By combining several key water parameters into a single device, the meter is ideally suited for applications requiring reliable monitoring of water quality and mineral content. Compared to the Milwaukee MW803, the MW804 was developed for applications with higher conductivity and TDS levels. This makes the device particularly suitable for use in agriculture, aquaculture, and water treatment, as well as in applications involving elevated salt and mineral concentrations. Simultaneous parameter monitoring enables a comprehensive assessment of water quality and reduces the effort required for individual measurements. To ensure reliable results, the MW804 features automatic temperature compensation (ATC). Temperature-related effects on conductivity and TDS measurements are automatically accounted for, ensuring consistent readings even under changing environmental conditions. Additionally, the sample temperature can be directly measured and monitored. The replaceable electrode ensures a long service life and cost-effective maintenance. Should the electrode wear out or sensor performance decline, it can be replaced without needing to replace the entire meter. This reduces ongoing costs and simplifies device maintenance. Automatic calibration facilitates quick and convenient setup. One- or two-point calibration is available for pH measurement, while conductivity measurement utilizes automatic one-point calibration. This allows the device to be easily adapted to various measurement tasks. Thanks to its waterproof housing, the MW804 is suitable for both laboratory use and mobile outdoor measurements. Its robust construction and ease of use make it a reliable solution for professional users and demanding monitoring applications. Technical Specifications Measurement parameters: pH | Conductivity | TDS (Total Dissolved Solids) | Temperature Measurement range: 0.00 to 14.00 pH | 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt TDS | 0.0 to 50.0 °C (32.0 to 122.0 °F) Accuracy: pH: ±0.05 pH | EC/TDS: 2% of full scale Calibration: Automatic Temperature compensation: Automatic Key benefits at a glance Simultaneous measurement of pH, conductivity, TDS, and temperature Designed for applications with higher conductivity and TDS levels Automatic temperature compensation Automatic calibration functions Suitable for portable and stationary applications Typical applications Agriculture Aquaculture Water treatment Process water monitoring Nutrient solutions Laboratory applications Scope of delivery Milwaukee MW804 pH, conductivity, TDS, and temperature meter Batteries User manual Frequently Asked Questions Is the device suitable for water with high mineral or nutrient concentrations? Yes, the MW804 is particularly well-suited for water with higher conductivity and TDS levels. Do I need multiple devices for different water parameters? No, pH, conductivity, TDS, and temperature are all measured with a single device. Is the meter suitable for hydroponics and nutrient solutions? Yes, it was designed to reliably monitor key water parameters in nutrient solutions. Can I replace the pH probe if necessary? Yes, the probe is replaceable. This saves costs in the long run and extends the device's service life. Is the device easy to use? Yes, the readings are clearly displayed, and the device is quick to learn. Can I use the meter outdoors? Yes, the robust, water-resistant housing makes it well-suited for outdoor use. Do I need to account for water temperature during measurement? No, the device automatically compensates for temperature fluctuations to ensure the most accurate readings possible.
Waterproof pH meter with a replaceable double-junction electrode for reliable pH measurements in aquaculture, pools, hydroponics, and laboratory applications. The Milwaukee PH51 stands out due to its ease of use, flexible one- or two-point calibration, and long battery life. Milwaukee PH51 waterproof pH meter with replaceable probe The Milwaukee PH51 is a compact, waterproof pH meter designed for reliable pH measurements across a wide range of applications. Its user-friendly design and robust construction make it suitable for both portable use and routine monitoring in aquaculture, pools, hydroponics, schools, and laboratories. A key advantage of the PH51 is its replaceable pH electrode. If the probe wears out or performance declines, it can be replaced without needing to discard the entire meter. This extends the device's service life and reduces long-term operating costs. The integrated double-junction electrode ensures reliable and stable measurement performance. For optimal accuracy, the device can be manually adjusted using one- or two-point calibration. The clear display allows for quick and easy reading of measurements, making the PH51 suitable for both experienced users and beginners. Its waterproof housing makes the meter ideal for use in humid environments. The compact design ensures easy transport and handling, while the long battery life guarantees reliable operation over numerous measurements. The Milwaukee PH51 offers a practical solution for anyone needing to monitor pH levels regularly while prioritizing ease of use, a replaceable electrode, and a robust design. Technical data Measurement parameter: pH Measurement range: 0.0 to 14.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Manual, 1- or 2-point Advantages Water-resistant housing for use in humid environments Replaceable pH electrode for extended service life Double-junction electrode Compact and handy design Long battery life Easy to use Suitable for mobile and stationary applications Typical applications Aquaculture Coral care Swimming pools Hydroponics Schools and education Laboratory applications Water analysis General pH monitoring Frequently Asked Questions Why do I need a pH tester in the first place? It’s used to measure whether the water is more acidic or more alkaline. Is the pH meter really waterproof and suitable for outdoor use? Yes, the device is waterproof and can be used without any problems in the garden, by the pool or outdoors. How accurately does the device measure the pH value? It provides very accurate results with a margin of error of just ±0.1 pH. How quickly do I get a result? You can see the current pH value on the display in a few seconds. Is the device also suitable for beginners? Yes. Simply switch it on, hold it in the water and read the value straight away. Is calibration easy for beginners to carry out? Yes, the manual 2-point calibration is easy to understand and quick to perform. Can I replace the probe myself if it wears out? Yes, the probe is replaceable and can be easily swapped out. Where can I use the pH tester? Ideal for aquariums, hydroponics, horticulture, swimming pools and many other applications. How do I care for and store the meter correctly? Clean it regularly, calibrate it correctly and store the probe in storage solution.
Waterproof pH and temperature meter with automatic temperature compensation and a replaceable electrode. The Milwaukee PH55 enables simultaneous measurement of pH and temperature and offers automatic one- or two-point calibration. Milwaukee PH55 waterproof pH and temperature meter with automatic temperature compensation and replaceable probe The Milwaukee PH55 is a compact, waterproof meter designed for the simultaneous determination of pH and temperature. By combining these two measurement parameters, the device is ideal for applications requiring reliable water quality monitoring. Its robust design and ease of use make the PH55 a practical solution for both portable use and routine measurements in laboratory or technical environments. A key advantage of the Milwaukee PH55 is its integrated automatic temperature compensation (ATC). Temperature fluctuations are automatically accounted for during measurement, ensuring greater accuracy and reliable pH results, even under changing conditions. The replaceable electrode ensures cost-effective, long-term use of the meter. The probe can be replaced when worn without needing to discard the entire unit, thereby reducing maintenance costs and extending the device's service life. For user convenience, the PH55 features automatic one- or two-point calibration. It supports various international buffer standards, allowing for flexible use across a wide range of applications. Simultaneous display of pH and temperature further simplifies the monitoring and evaluation of measurements. The waterproof housing protects the meter during operation in damp environments, ensuring reliable performance under demanding conditions. Combined with its simple calibration and integrated temperature measurement, the Milwaukee PH55 is suitable for both private and professional users. Technical Specifications Measurement parameters: pH | Temperature Measurement range: -2.0 to 16.0 pH | -5.0 to 60.0 °C pH range: -2.0 – 16.0 pH Resolution: 0.1 pH Accuracy: ±0.1 pH Calibration: Automatic 1- or 2-point calibration with two sets of preset buffer solutions (pH 4.01; 7.01; 10.01) or (pH 4.01; 6.86; 9.18) Benefits of the PH55 Simultaneous measurement of pH and temperature Waterproof housing Replaceable electrode Automatic one- or two-point calibration Support for various buffer standards Compact and handy design Typical Applications Aquaristics Water analysis Environmental monitoring Laboratory applications Water treatment Scope of Delivery Milwaukee PH55 pH and temperature meter Batteries User manual Frequently Asked Questions Can I read the pH value and temperature at the same time? Yes, both values are clearly displayed simultaneously. Is the device suitable for cold or warm water samples? Yes, it provides reliable measurements across a wide temperature range of -5 to 60°C. How quickly do I get a stable reading? The probe responds quickly and displays stable readings after a short time. Can I replace the probe myself if it wears out? Yes, the electrode can be easily replaced by unscrewing it. Does the device really float if it falls into the water? Yes, it floats on the water's surface and does not sink. Do I need to calibrate the device regularly? Yes, simple automatic 1- or 2-point calibration ensures accuracy. Is the device easy for beginners to use? Yes, operation is simple and very intuitive thanks to the use of icons.
Compact digital pH tester for the rapid determination of pH levels in liquids. The Milwaukee PH600 stands out thanks to its ease of use, easy-to-read display, manual 1-point calibration, and long battery life. Ideal for aquariums, hydroponics, water analysis, and many other applications. Milwaukee PH600 digital pH tester – Simple operation for quick measurements The Milwaukee PH600 is a compact digital pH tester that enables fast and straightforward pH measurements across various applications. Its handy design makes the device ideal for mobile use, allowing for reliable on-site pH monitoring. The measurement range covers the entire pH spectrum—from highly acidic to highly alkaline solutions—making the PH600 a versatile tool for aquariums, hydroponics, water analysis, horticulture, laboratory work, and many other fields. The easy-to-read LCD display ensures convenient reading of measurements and makes the device simple to operate, even for users without extensive experience in measurement technology. To ensure reliable accuracy, the pH tester features manual 1-point calibration. This allows the device to be quickly recalibrated whenever necessary, guaranteeing consistently precise results. Additionally, the long battery life ensures reliable operation over extended periods, making the Milwaukee PH600 a practical companion for routine checks. Thanks to its ease of use, compact design, and reliable measurement technology, the Milwaukee PH600 is suitable for both private and professional users seeking a cost-effective pH measurement solution. Benefits Compact and handy pH tester Manual 1-point calibration Long battery life Suitable for mobile and stationary applications Versatile use across various fields Measurement parameter: pH Measurement range: 0.0 to 14.0 pH Typical applications Aquaristics Hydroponics Water analysis Horticulture Laboratory applications Education and training General pH monitoring Frequently Asked Questions How quickly does the device display the pH value? You see the reading immediately after immersion. Can I use the device in the garden and in water? Yes, you can use it for plants, soil, hydroponics, and pools. Is the device easy for beginners to use? Yes, you can simply switch it on, take a measurement, and read the value directly. How accurate are the measurements in everyday use? The measurements are very reliable and help you ensure proper care. Do I need to consider the temperature? No, the device automatically adjusts to different temperatures. Can it also help me take better care of my plants? Yes, you can quickly see whether the pH level is optimal for healthy plants. Is the device robust enough for regular use? Yes, it is designed for daily use in the garden or around the house.
Waterproof TDS meter for measuring dissolved solids in the low range. The Milwaukee T75 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T75 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T75 is a compact, waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Specifically developed for low-range measurements, this tester is ideal for applications requiring reliable water quality monitoring. Automatic temperature compensation (ATC) ensures that temperature fluctuations during measurement are automatically accounted for, delivering consistent results even under changing environmental conditions. This is particularly advantageous for applications such as water treatment, aquarium maintenance, and routine water testing. Another key feature of the Milwaukee T75 is its replaceable probe. Should the electrode wear out or performance decline, it can be replaced individually without the need to discard the entire unit, thereby extending the device's service life and reducing maintenance costs. Manual single-point calibration allows for easy adjustment of the device to specific measurement requirements. Its compact design ensures a comfortable grip, making it suitable for both portable use and regular operation in laboratories or technical facilities. The waterproof housing protects the device during use in damp environments, ensuring reliable operation across a wide range of conditions. Combined with ease of use and precise measurement technology, the Milwaukee T75 offers a practical solution for monitoring TDS levels. Technical Data Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 1999 ppm (mg/L) Resolution: 1 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Specifically designed for low-range TDS measurements Replaceable probe Compact and portable design Reliable monitoring of total dissolved solids Suitable for mobile and stationary applications Typical Applications Aquaristics Water treatment Drinking water monitoring Environmental analysis Water quality monitoring General TDS measurements Scope of Delivery Milwaukee T75 TDS meter Batteries User manual Frequently Asked Questions Is this meter suitable for drinking water? Yes, it is ideal for quickly testing drinking water and other water samples. Can I check the water quality myself? Yes, the meter displays a reading directly on the screen in just a few seconds. How does a TDS meter benefit me in everyday life? You can quickly tell if the composition of your water has changed. Is the device also suitable for aquariums or reverse osmosis systems? Yes, many users employ it to monitor aquarium and filtered water. Do I need to take special care of the device after each use? No, it is usually sufficient to rinse the measuring tip briefly after use. Can the device get wet? Yes, the casing is waterproof and designed for use around water. Is it complicated to use? No, the device is easy to use and is also suitable for beginners.
Waterproof TDS meter for measuring dissolved solids in the high range. The Milwaukee T76 features automatic temperature compensation, a replaceable probe, and simple single-point calibration. Milwaukee T76 waterproof TDS meter for dissolved solids with automatic temperature compensation and replaceable probe The Milwaukee T76 is a waterproof TDS meter designed to measure Total Dissolved Solids (TDS) in water samples. Unlike meters designed for lower TDS ranges, the T76 is particularly well-suited for applications involving higher concentrations of dissolved substances, offering reliable water quality monitoring in demanding environments. Automatic temperature compensation (ATC) automatically adjusts for temperature-related fluctuations during measurement. This ensures consistent and reliable results, even amidst changing ambient conditions or varying sample temperatures. A key advantage of the Milwaukee T76 is its replaceable probe. If the sensor wears out or performance declines, the electrode can be replaced without needing to discard the entire unit. This significantly reduces maintenance costs and extends the device's service life. Manual single-point calibration allows for easy adjustment to specific measurement requirements. Its compact design ensures a comfortable grip, making the device suitable for both portable use and regular operation in technical facilities or laboratory settings. The waterproof housing protects the meter during use in damp environments, ensuring reliable operation under challenging conditions. Ease of use and robust construction make the Milwaukee T76 a practical solution for users who need to precisely monitor higher TDS levels. Technical Specifications Measurement parameter: Total Dissolved Solids (TDS) Measurement range: 0 to 9990 ppm (mg/L) Resolution: 10 ppm (mg/L) Accuracy: EC: ±2% of full scale Temperature compensation: Automatic, 0 to 50°C (32 to 122°F) Advantages Waterproof housing Suitable for high-range TDS measurements Replaceable probe Rugged design for demanding operating conditions Typical Applications Water treatment Process water monitoring Aquariums Environmental analysis Laboratory applications Scope of Delivery Milwaukee T76 TDS meter Batteries User manual Frequently Asked Questions Can I quickly see if my water is clean enough using this device? Yes, it displays the amount of dissolved substances in the water directly. Is the meter suitable for pools and aquariums as well? Yes, it is ideal for aquariums, pools, water treatment, and similar applications. Do I need to worry about inaccurate readings due to temperature fluctuations? No, automatic temperature compensation ensures stable results. How often do I need to calibrate the device? A simple 1-point calibration—performed occasionally depending on usage—is sufficient. What happens if the probe gets dirty over time? It can be easily cleaned or replaced if necessary. Can I use the device outdoors? Yes, it is waterproof and suitable for outdoor use. Is the device easy to use, even without prior experience? Yes—simply dip it in, read the result, and you're done; it’s very straightforward.
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)
The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932)