XS PC 5 ECO PACK - Quick tester for pH/mV/conductivity/TDS/salt/temp. measurement

The Neomeris conductivity calibration solution with 12 880 µS/cm is ideal for setting a conductivity meter. It can be used in many areas, for example in saline process solutions or nutrient solutions (hydroponics). The Neomeris conductivity calibration solution with a reference value of 12 880 µS/cm (±1 % at 25 °C) in the handy 70 ml bottle is suitable for precise calibration of your conductivity devices and electrodes. The compact bottle format is particularly practical for mobile use for occasional on-site calibrations. Precise reference solution for devices and electrodes The calibration solution with 12 880 µS/cm is a common standard in the higher conductivity range and is therefore suitable for more mineralized or saline waters. With a tolerance of ±1 % at 25 °C, the solution provides a reliable reference to calibrate conductivity meters and electrodes accurately and minimize measurement deviations. What is a 12 880 µS/cm conductivity calibration solution used for? A 12 880 µS/cm ± 1 % (25 °C), 70 ml conductivity calibration solution is used for calibrating and checking conductivity meters in the high conductivity range. The value 12 880 µS/cm (≈ 12.88 mS/cm) lies in the range of highly mineralized or saline solutions. It is used to set a conductivity meter when measuring high conductivities. Typical application areas for this measurement range: saline process solutions, nutrient solutions (hydroponics), aquaristics (seawater), industrial water treatment, wastewater with high salt content. To check the measuring cell for the correct cell constant value. A meter measures most accurately in the range in which it was calibrated – therefore, for high measurement ranges, a correspondingly high reference solution is required. What do the specifications on the bottle mean? 12 880 µS/cm This is the nominal value of the electrical conductivity of the solution. µS/cm (microsiemens per centimeter) is the unit of conductivity. ± 1 % This is the tolerance or accuracy. The actual value is at most 1 % above or below 12 880 µS/cm. (25 °C) The specified conductivity value applies exactly at 25 °C because conductivity depends on temperature. Devices usually use temperature compensation. 70 ml This is the filling volume – sufficient for several calibrations. This solution is used to precisely calibrate a conductivity meter in the upper measurement range, where 12 880 µS/cm at 25 °C is the defined reference value with ± 1 % accuracy. Buy the Neomeris Conductivity Calibration Solution EC 12880 μS/cm in the 70 ml bottle easily online now With the Neomeris conductivity calibration solution EC 12880 µS/cm, you rely on quality, safety, and ease of use – for reliable measurement results you can count on. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris storage solution is ideal for the safe storage of pH and redox electrodes. It prevents your electrodes from drying out. Neomeris Storage Solution for pH and Redox Electrodes – 3 mol/l KCl, 70 ml The Neomeris storage solution is a high-quality KCl electrolyte solution for the safe storage of pH and redox electrodes. With a concentration of 3 mol/l potassium chloride (KCl), it provides optimal conditions to maintain the lifespan and measurement accuracy of your electrodes. What should I use the storage solution for? Prevents drying out of the sensitive membrane Maintains the responsiveness and precision of the electrode Suitable for pH and ion-selective electrodes (ISE) The solution acts as both an electrolyte and a pH buffer, stabilizing the contact between the electrode and the medium. Regularly placing the electrode in this solution ensures it is always ready for use – providing reliable and precise measurement results. Content: 70 ml Type: Saturated KCl solution (3 mol/l) Application: Storage of pH and redox electrodes Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

XS Professional pH Pufferlösung zur ElektrodenkalibrierungDie 250 ml und 500 ml Flaschen besitzen einen praktischen Hygiene- Verschluss welcher vor Verunreinigungen schützt. Sie drücken einfach die Flasche zusammen und es wird automatisch genügend Leitfähigkeitskalibrierlösung in den oberen Teil der Flasche befördert um eine Kalibrierung vorzunehmen.Auslieferung mit DAkkS Zertifikat und N.I.S.T. Rückführbarkeit

Neomeris Storage Solution 3 mol/L KCl – pH and Redox Electrolyte Solution Optimal care for the storage of pH and redox electrodes The Neomeris Storage Solution with 3 mol/L KCl is designed for the storage and maintenance of pH and redox electrodes. It helps maintain a stable electrolyte layer and protects sensitive sensors from drying out and contamination. Reliable storage solution for pH and redox electrodes The Neomeris Storage Solution is specially formulated for proper storage and care of pH and redox electrodes. It keeps the electrode's electrolyte layer stable and reliably protects sensitive sensors from drying, contamination, and functional loss. Storing the electrodes in a KCl-based electrolyte preserves the ionic environment of the reference electrode. This reduces drift and long-term errors, contributing significantly to the long-term measurement stability and accuracy of the electrodes. Ready-to-use electrolyte solution for maintenance and operation The storage solution is ready to use and is ideal for the daily maintenance of pH and redox electrodes during ongoing measurements. It ensures proper sensor function both between individual measurements and during extended storage. Typical applications include laboratories, industrial measurement stations, and research facilities where pH and redox electrodes are regularly used and require reliable care. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Manufacturer article number: 50014433

Manufacturer number: 51102013XS BASIC buffer solutions in sachetsSingle buffer (no different measuring ranges)with N.I.S.T. traceability

Neomeris pH Buffer Solution pH 4.01 – Acid Calibration Solution Stable reference value in the acidic range for pH electrode calibration The Neomeris pH buffer solution with a value of 4.01 ± 0.01 at 25 °C is specifically designed for precise calibration of pH electrodes. The buffer solution assists in calibrating pH meters in the acidic range. It complements the neutral and basic references and ensures a complete, multipoint calibration. The practical hygiene cap protects the solution from contamination. Acid reference solution for precise pH calibration The Neomeris pH buffer solution pH 4.01 serves as a stable reference for exact calibration of pH electrodes in the acidic measurement range. With an accuracy of pH 4.01 ± 0.01 at 25 °C, it enables reliable and reproducible calibration results and supports consistent measurement accuracy of pH meters. Complement for multipoint calibration The acid buffer solution complements neutral and basic calibration solutions, making it an essential part of multipoint pH calibration. It ensures precise adjustment of the measurement system across the entire range. The practical hygiene cap protects the solution from contamination and ensures safe use in laboratory and industrial applications. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 4.01 ± 0.01 (25°C) 500 ml – precision meets practical handling This high-quality pH buffer solution with a defined value of pH 4.01 ± 0.01 at 25 °C is ideal for calibrating your pH electrodes in laboratories, industry and environmental analysis. It ensures reliable and reproducible measurement results – a must for any professional pH measurement. Innovative 500 ml bottle with hygienic cap The solution is supplied in a specially developed 500 ml bottle equipped with a special hygienic cap. This effectively protects the buffer solution from contamination and makes it particularly easy to use: ➡️ Simply squeeze – ready for calibration! By gently squeezing the bottle, a sufficient amount of buffer solution is transferred to the upper part – perfectly dosed for direct calibration of your electrode, without any additional accessories or risk of contamination. Product advantages at a glance: ✔️ Precise pH value: 4.01 ± 0.01 at 25°C ✔️ Practical 500 ml bottle with dosing function ✔️ Hygienic cap protects against contamination ✔️ Ideal for laboratories, industry and environmental analysis ✔️ Compatible with all common pH meters Tip: For precise multi-point calibration, we recommend combining with other buffer solutions (e.g. pH 7.00 and pH 10.00). Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

XS Professional pH Pufferlösung zur ElektrodenkalibrierungDie 250 ml und 500 ml Flaschen besitzen einen praktischen Hygiene- Verschluss welcher vor Verunreinigungen schützt. Sie drücken einfach die Flasche zusammen und es wird automatisch genügend Leitfähigkeitskalibrierlösung in den oberen Teil der Flasche befördert um eine Kalibrierung vorzunehmen.Auslieferung mit DAkkS Zertifikat und N.I.S.T. Rückführbarkeit

The 1000 ml pH 4.01 buffer solution is particularly suitable for high consumption and allows for easy, practical dosing. It ensures precise calibration of pH electrodes. Neomeris pH Buffer Solution pH 4.01 ± 0.01 (25 °C), 1000 ml - Reliable calibration - buy online Our pH buffer solution with a value of 4.01 ± 0.01 at 25 °C is the ideal choice for precise calibration of pH electrodes in laboratories, industry, and environmental analysis. It ensures accurate measurement results and supports reliable quality assurance in all areas where pH measurements play an important role. Practical & hygienic: The 1000 ml bottle with special cap The solution is supplied in a large-volume 1-liter bottle equipped with an innovative hygienic cap. This reliably protects the buffer solution from contamination and ensures clean, safe use – even with frequent use. Simply squeeze – ready for calibration! By gently squeezing the bottle, a precisely measured amount of solution is transferred to the upper part – ideal for direct calibration without additional accessories or risk of contamination. Your advantages at a glance: Exact pH value: 4.01 ± 0.01 at 25 °C Large bottle with 1000 ml content – ideal for frequent users Hygienic cap protects against contamination Integrated dosing function for easy handling Compatible with all common pH meters Application tip: For precise multi-point calibration, we recommend combining with additional buffer solutions (e.g., pH 7.00 and pH 10.00). Neomeris – For precise and reliable pH measurements. Rely on quality, safety, and complete traceability – with professional calibration solutions from Neomeris, including a certificate of analysis. The practical 1000 ml bottle with hygienic dosing system makes the Neomeris calibration solution ideal for regular use in professional applications. Benefit from high precision, convenient handling, and consistently reliable measurement results – day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

XS Professional pH Pufferlösung zur ElektrodenkalibrierungDie 250 ml und 500 ml Flaschen besitzen einen praktischen Hygiene- Verschluss welcher vor Verunreinigungen schützt. Sie drücken einfach die Flasche zusammen und es wird automatisch genügend Leitfähigkeitskalibrierlösung in den oberen Teil der Flasche befördert um eine Kalibrierung vorzunehmen.Auslieferung mit DAkkS Zertifikat und N.I.S.T. Rückführbarkeit

Manufacturer number: 51102083Storage solution for pH/ORP sensors

Manufacturer number: 51102023 XS BASIC buffer solutions in sachetsSingle buffer (no different measuring ranges)with N.I.S.T. traceability

Neomeris pH Buffer Solution pH 7.00 – Ready-to-Use Reference Solution Precise calibration of pH meters and electrodes The Neomeris pH Buffer Solution pH 7.00 is a ready-to-use, standardized reference solution for precise calibration of pH meters and electrodes. With an accuracy of pH 7.00 ± 0.01 at 25 °C, it meets the highest standards for measurement reliability and reproducibility, making it ideal for the neutral pH range. Neutral Reference Solution for Reliable pH Calibration The clear green color coding allows quick identification of the buffer solution and minimizes confusion during daily use. The hygienic cap reliably protects against contamination and ensures clean handling. Easy to Use with Versatile Applications It can be used in: Laboratory analysis Environmental and water testing Food monitoring Research & education Industrial processes Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Neomeris pH buffer solution pH 7.00 ± 0.01 (25°C) 70 ml – Reliable calibration for precise pH measurements Neomeris pH buffer solution pH 7.00 ± 0.01 at 25°C is a high-quality, ready-to-use calibration solution for the precise adjustment of your pH electrodes. It is ideal for use in laboratories, industry, environmental analysis, research, and education—anywhere where precise pH values are crucial. Why Neomeris? – Quality that convinces: ✔️ Precise calibration: With an accuracy of ±0.01 pH at 25°C, the solution meets the highest requirements for measurement precision. ✔️ Color coding: The green color of the solution ensures clear visual differentiation and prevents mix-ups in everyday work. ✔️ Innovative hygienic closure: The special bottle cap reliably protects the solution from contamination and enables clean, safe use. ✔️ Practical dosing: Simply squeezing the bottle releases a sufficient amount of solution into the upper part – ideal for direct calibration without additional accessories. Areas of application: Laboratory analysis Environmental and water analysis Food monitoring Research and teaching Industrial processes Tip: For precise multi-point calibration, we recommend combining with other Neomeris buffer solutions, e.g., pH 4.01 and pH 10.00. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The Neomeris pH buffer solution, with a pH value of 7.00, is ideal for calibrating your measuring instruments. It is excellent for use in a wide range of applications where pH values are measured. Neomeris pH buffer solution pH 7.00 ± 0.01 (25 °C), 500 ml – precision and reliability for your pH calibration The Neomeris pH buffer solution pH 7.00 ± 0.01 at 25 °C is a ready-to-use calibration solution for the reliable adjustment of pH meters. It is ideal for use in laboratories, industry, environmental analysis, research and education – wherever precise pH values are crucial. Product information: Precise calibration: With an accuracy of ±0.01 pH at 25°C, the solution meets the highest standards of measurement precision. Colour coding: The green colour of the solution ensures clear visual differentiation and prevents mix-ups. Innovative hygienic cap: The special bottle cap reliably protects the solution from contamination and enables clean, safe use. Convenient dispensing: Squeezing the bottle dispenses the required amount of solution into the upper section – ideal for direct calibration without additional accessories. 500 ml capacity: Ideal for regular use and professional applications. What is a pH 7.00 buffer solution used for? A 500 ml pH 7.00 ± 0.01 (25 °C) buffer solution is used for the calibration and verification of pH meters in the neutral range. pH 7.00 is the most important reference point because it represents the neutral point on the pH scale. It is required: For single-point calibration when measuring values close to pH 7. As the midpoint in a 2- or 3-point calibration (e.g. with pH 4.01 and 9/10). Suitable for applications such as: drinking water analysis, environmental analysis, the food and pharmaceutical industries, as well as schools, training and laboratories. As many samples fall within the pH 6–8 range, this buffer solution is particularly frequently used. What do the details on the bottle mean? pH 7.00 This is the exact target pH value of the solution at the reference temperature. The chemical composition ensures a stable neutral value. ± 0.01 This is the very low tolerance. The actual pH value is a maximum of 0.01 pH units above or below 7.00 (i.e. between 6.99 and 7.01). This demonstrates the high accuracy of the solution. (25 °C) The pH value given is accurate at exactly 25 °C, as the pH value depends on temperature. Modern pH meters take this into account via temperature compensation. 500 ml This is the volume of the buffer solution. The solution is used to precisely calibrate a pH meter in the neutral range, whereby 7.00 at 25 °C is the exact reference value with a very small deviation of ± 0.01. Neomeris pH buffer solution – for reliable pH measurements Reliable calibration solutions from Neomeris for precise pH measurements. Rely on quality, safety and convenience – with Neomeris’ colour-coded, ready-to-use buffer solutions for daily use. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Manufacturer number: 51102053XS BASIC calibration solutions in sachetsSingle buffer (no different measuring ranges)with N.I.S.T. traceability

Neomeris Conductivity Calibration Solution – Accurate EC and TDS Reference Standard Solutions Standard solutions for calibrating and verifying conductivity meters The Neomeris Conductivity and TDS Calibration Solution is a standardized reference solution for precise calibration and verification of instruments measuring electrical conductivity (EC) and Total Dissolved Solids (TDS). With a stable reference value of 1413 µS/cm ± 1% at 25 °C, it ensures reliable and reproducible results across a wide range of applications. Precise Reference Solution for Conductivity Meter Calibration The special hygiene cap reliably protects the calibration solution from contamination and ensures safe handling. Each 250 ml bottle comes with a certificate confirming the quality and accuracy of the reference solution. The solution is suitable for numerous applications, including water and environmental analysis, food and beverage industry, agriculture and hydroponics, industrial processes, as well as research and teaching. Reliable Use and Versatile Applications In which application areas can the solution be used? Water and Environmental Analysis: Monitoring mineral and ion concentrations to assess water quality. Food and Beverage Industry: Ensuring product consistency and hygiene through precise conductivity measurements. Agriculture & Hydroponics: Monitoring nutrient availability in soils and nutrient solutions. Industrial Processes: Process control in electroplating, chemical production, and energy generation. Research & Education: Reference solution for precise experiments and training. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

Our Neomeris conductivity calibration solution with 1413 μS/cm is ideal for calibrating conductivity and TDS meters. It supports the precise adjustment of measuring devices in environmental analysis, drinking water monitoring, and industrial applications. The Neomeris conductivity calibration solution ensures precise calibration of conductivity and TDS meters. With a stable reference value and a handy 70 ml bottle, it is ideal for laboratories, drinking water analysis, and mobile measurements. Precise conductivity calibration for your device The Neomeris conductivity calibration solution is a reference solution for calibrating conductivity and TDS meters. It allows your electrodes to be quickly and reliably adjusted to a defined target value. With a stable conductivity value of 1413 μS/cm ± 1 % at 25 °C, it ensures precise and reliable measurements. Versatile applications The calibration solution is versatile. It supports the calibration of measuring devices in environmental analysis, drinking water applications, and industrial processes. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

The 500 ml conductivity calibration solution with a conductivity of 147 μS/cm is ideal for reliable EC measurements. It has been specially developed for calibrating instruments used to measure electrical conductivity (EC). Neomeris Conductivity Calibration Solution 147 μS/cm ± 1% (25 °C), 500 ml – Precision for your EC meters The Neomeris conductivity calibration solution, with a stable reference value of 147 μS/cm ± 1% at 25 °C, has been specially developed for the calibration of instruments used to determine electrical conductivity (EC). It ensures precise and reproducible measurement results in numerous fields – from environmental analysis to industrial process control. Product benefits at a glance: Precise calibration: Consistent conductivity value with an accuracy of ±1% at 25°C – ideal for precise applications. Certificate of analysis included: Each 500 ml bottle is supplied free of charge with a certificate confirming the quality and accuracy of the solution. Safe handling: The special hygienic cap reliably protects the solution from contamination. Easy dosing: Squeezing the bottle dispenses the required amount of solution into the upper section – ideal for direct calibration without additional accessories. 500 ml capacity: Ideal for regular use in laboratories, businesses and educational institutions with higher consumption. What is the conductivity calibration solution used for? The conductivity calibration solution 147 μS/cm ± 1 % at 25 °C (500 ml) is used for calibrating and verifying conductivity meters. It serves as a reference solution with a precisely defined electrical conductivity, ensuring that measuring instruments display accurate and reliable values. This standard is particularly useful for measurements in the low conductivity range (e.g. slightly mineralised water). What do 147 μS/cm, ± 1 % and 25 °C stand for? The value 147 μS/cm is particularly suitable for instruments that are to be set or checked in the lower measurement range. The specification ± 1 % at 25 °C describes the high accuracy of the solution at the reference temperature, as conductivity is temperature-dependent. What can I do with the calibration solution? You can use the solution to: set up a new device for the first time, check the measurement accuracy on a regular basis, or carry out a check measurement after maintenance or cleaning. What should be borne in mind when handling the solution? The 500 ml bottle is suitable for several calibration cycles in the laboratory or in the field. It is important to draw the solution cleanly and not to pour it back in, to avoid contamination. Check the expiry date: Do not use expired calibration solutions. Neomeris conductivity solutions – for reliable EC measurements. Rely on quality, safety and traceability – with Neomeris’ professional calibration solutions, including a certificate of analysis. With its practical 500 ml bottle and hygienic dosing system, the Neomeris calibration solution is particularly well suited for regular use in professional environments. Rely on quality, precision and ease of use – for reliable measurement results, day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

XS Professional conductivity calibration solution for electrode calibration The 250 ml and 500 ml bottles have a practical hygienic cap which protects against contamination. Simply squeeze the bottle and sufficient conductivity calibration solution is automatically delivered to the top of the bottle for calibration. Supplied with DFM certificate (equivalent to Accredia) and N.I.S.T. traceability

The Neomeris conductivity calibration solution is perfect for calibrating your measuring instruments for determining electrical conductivity. It is available in a 1000 ml bottle. NEOMERIS conductivity calibration solution EC 1413 μS/cm – 1413 μS/cm ±1% at 25°C, 1000 ml Reliable calibration for precise EC measurements The Neomeris calibration solution with a defined conductivity value of 1413 μS/cm ±1% at 25°C has been specially developed for the exact calibration of measuring instruments for determining electrical conductivity (EC). It provides stable reference values for precise and reproducible measurement results – indispensable in laboratories, industry and research. Product advantages at a glance: Calibration value: 1413 μS/cm ±1% at 25°C Contents: 1000 ml Hygienic closure: Innovative dosing mechanism protects against contamination and enables easy, clean removal Certificate of analysis included: For maximum transparency and quality assurance Why is a calibration solution essential? Measuring devices can change due to use, deposits or temperature fluctuations. Without regular calibration, the values displayed are often no longer accurate. With a reference solution, you can check your device and adjust it correctly. What is the conductivity calibration solution suitable or unsuitable for? The solution is suitable for conductivity measuring devices that can be set to this calibration value. It is not suitable for other water analyses or as a measuring sample itself. Typical areas of application for a conductivity calibration solution (EC 1413 µS/cm) are: Calibration of conductivity meters (EC meters) Checking the measuring accuracy of probes and electrodes The 1413 µS/cm solution is a commonly used standard in the medium conductivity range. With its practical 1000 ml bottle and hygienic dosing system, the Neomeris calibration solution is particularly suitable for regular use in professional environments. Trust in quality, precision and ease of use – for reliable measurement results, day after day. Frequently asked questions Where can I find the safety data sheet for the solution I want to use? The safety data sheet is included in printed form with the delivery of the goods. The safety data sheet can be viewed or downloaded at any time in the download area of the online shop. What bottle sizes are available? Generally, there are 60/70 ml, 250 ml, 500 ml and 1,000 ml bottles. There is one exception, for example, with brands such as Hanna, where bags are sold instead of bottles. How long do the solutions last? The shelf life is printed on the product label. Upon delivery, the shelf life is at least 7 months. Can the solutions still be used after the expiry date? No, because the function and quality can no longer be guaranteed after the best-before date has expired. How can I dispose of the solutions? Please refer to the safety data sheet for more detailed information on the disposal of the solutions. Disposal must be carried out in accordance with official regulations. What is the emergency number for acute poisoning? The emergency number for the North Poison Information Centre is +49 551-19240 and is available 24/7.

XS Professional conductivity calibration solution for electrode calibration The 250 ml and 500 ml bottles have a practical hygienic cap which protects against contamination. Simply squeeze the bottle and sufficient conductivity calibration solution is automatically delivered to the top of the bottle for calibration. Supplied with DFM certificate (equivalent to Accredia) and N.I.S.T. traceability

XS Professional conductivity calibration solution for electrode calibration The 250 ml and 500 ml bottles have a practical hygienic cap which protects against contamination. Simply squeeze the bottle and sufficient conductivity calibration solution is automatically delivered to the top of the bottle for calibration. Supplied with DFM certificate (equivalent to Accredia) and N.I.S.T. traceability