To ensure proper commissioning as well as highly accurate measurement, the use of calibration solutions is essential. Regular calibration ensures that the medium to be monitored is measured reliably. The frequency depends in particular on the operating conditions and the respective process requirements. Proper calibration can compensate for changes in the probe over time, which can be caused by minor damage or contamination, for example.
When selecting a probe, it is important to ensure that:
- The solution selected matches the measuring range of the instrument used.
- The solution used best matches the range in which measurements are to be made.
- In the case of a multi-point calibration, make sure that calibration solutions are used whose values are above and below the required measuring range.
All solutions offered are traceable to the certified international standard SRM NIST.
Die M10016B Reinigungslösung von Milwaukee sorgt für eine gründliche Pflege von Elektroden. Jeder Beutel enthält 20 ml und bietet eine hygienische, frische Anwendung, um die Lebensdauer und Genauigkeit der Messgeräte zu erhalten.
Horiba 1.25 mmol/l iCa standard solution (Y052L) for calibration of the LAQUAtwin Ca-11C tester Manufacturer article number: 3200774598
Horiba 2.50 mmol/l iCa standard solution (Y052H) for calibration of the LAQUAtwin Ca-11C tester Manufacturer article number: 3200774599
Die Milwaukee M10004B pH 4.01 Kalibrierlösung im Einzelbeutel bietet eine komfortable und präzise Möglichkeit zur Kalibrierung von pH-Messgeräten. Jeder Beutel enthält 20 ml frische Lösung – ideal für den mobilen Einsatz und um Verunreinigungen zu vermeiden.
Die M10032B ist eine präzise TDS-Kalibrierlösung (1382 ppm) im Einwegbeutel. Perfekt für portable und Laborgeräte, wenn eine schnelle und saubere Kalibrierung erforderlich ist.
Mit der M10038B lässt sich die Genauigkeit von TDS-Messgeräten für höhere Konzentrationen zuverlässig überprüfen. Jeder 20 ml Beutel ist einzeln versiegelt, um eine gleichbleibende Qualität sicherzustellen.
Die M10030B ist eine gebrauchsfertige Kalibrierlösung für Leitfähigkeitsmessgeräte im Bereich von 12880 µS/cm. Die Einzelbeutel sichern präzise Ergebnisse und verhindern Kontamination durch wiederholte Nutzung.
Die M10080B Lösung mit 800 ppm TDS ist ideal für Anwendungen im mittleren Messbereich. Durch die Portionsbeutel ist eine exakte, kontaminationsfreie Kalibrierung gewährleistet.
Mit der Milwaukee M10007B pH 7.01 Kalibrierlösung im praktischen Beutel lassen sich pH-Messgeräte zuverlässig justieren. Die Einwegpackungen garantieren konstante Qualität und sind ideal für Labor und Außeneinsätze.
Die Milwaukee M10010B pH 10.01 Lösung im Beutel eignet sich optimal für Kalibrierungen im alkalischen Bereich. Dank der Einzelverpackung bleibt die Lösung frisch und frei von Verunreinigungen – perfekt für präzise Messungen.
Mit der M10031B können Leitfähigkeitsmessgeräte auf 1413 µS/cm zuverlässig kalibriert werden. Die handlichen 20 ml Beutel sind sofort einsatzbereit und garantieren konstante Qualität.
Manufacturer number: 51100513with N.I.S.T. traceability
Conductivity calibration solution for your device calibration
Die MA9071 Elektrolytlösung ist speziell für gelöste-Sauerstoff-Sonden konzipiert. Sie sorgt für eine zuverlässige Funktion und exakte Messergebnisse.
Manufacturer number: 51100503with N.I.S.T. traceability
Manufacturer number: 51300313with DFM (equivalent to Accredia) and N.I.S.T. traceability
Manufacturer article number: 3200987466 (500-NH4-ISA)
Manufacturer article number: 3200987465 (500-NA-ISA)
HORIBA Ion standard solutions, ionic strength controllers and ion-selective electrode filling solutions are indispensable for accurate and reproducible measurements with ion-selective electrodes (ISE). A large number of analyses in laboratories and in the field, such as testing water and wastewater quality, environmental monitoring and quality control in industrial processes, rely on these solutions. Ionic standard solutions are used to calibrate ion-selective electrodes and ensure precise measurement. Horiba's standard solutions have a known ion concentration. They are therefore essential for setting up the electrodes correctly before using them for test runs. Ionic strength regulators are specifically designed to adjust the ionic strength of the sample to enable accurate measurements. They are particularly important when the composition of the samples could affect the measurement or in samples with low ionic strength. The ionic strength can be adjusted to stabilize the ionic activity in the solution. This leads to more accurate measurement results. Ion-selective electrode filling solutionsIon-selective electrode filling solutions are specific solutions that are filled into ion-selective electrodes. They ensure the proper operation of the electrode and help to maintain the potential required to measure the specific ion. To ensure that measurements meet international standards and to ensure conformity with regulatory and compliance standards, these specialized solutions are essential. Many industries, from pharmaceutical to environmental, use these solutions to meet their quality and safety requirements. For users working in areas such as water analysis, environmental monitoring or regulatory testing environments, these solutions ensure the accuracy and reliability required for critical measurements. To provide reliable data for important environmental, health and safety decisions, they are a crucial part of analytical chemistry. Overall, HORIBA's solutions enable experts to make the best use of their instruments and achieve the precise results required for their applications. Manufacturer article number: 3200987464 (500-NA-SL)
Horiba 1000 mg/L sodium ion standard solution, 500ml Manufacturer article number: 3200987463 (500-NA-SH)
HORIBA Ion standard solutions, ionic strength controllers and ion-selective electrode filling solutions are indispensable for accurate and reproducible measurements with ion-selective electrodes (ISE). A large number of analyses in laboratories and in the field, such as testing water and wastewater quality, environmental monitoring and quality control in industrial processes, rely on these solutions. Ionic standard solutions are used to calibrate ion-selective electrodes and ensure precise measurement. Horiba's standard solutions have a known ion concentration. They are therefore essential for setting up the electrodes correctly before using them for test runs. Ionic strength controllers are specifically designed to adjust the ionic strength of the sample to enable accurate measurements. They are particularly important when the composition of the samples could affect the measurement or in samples with low ionic strength. The ionic strength can be adjusted to stabilize the ionic activity in the solution. This leads to more accurate measurement results. Ion-selective electrode filling solutionsIon-selective electrode filling solutions are specific solutions that are filled into ion-selective electrodes. They ensure the proper operation of the electrode and help to maintain the potential required to measure the specific ion. To ensure that measurements meet international standards and to ensure conformity with regulatory and compliance standards, these specialized solutions are essential. Many industries, from pharmaceutical to environmental, use these solutions to meet their quality and safety requirements. For users working in areas such as water analysis, environmental monitoring or regulatory testing environments, these solutions ensure the accuracy and reliability required for critical measurements. To provide reliable data for important environmental, health and safety decisions, they are a crucial part of analytical chemistry. Overall, HORIBA's solutions enable experts to make the best use of their instruments and achieve the precise results required for their applications. Manufacturer article number: 3200697185 (500-K-IFS)
HORIBA Ion standard solutions, ionic strength controllers and ion-selective electrode filling solutions are indispensable for accurate and reproducible measurements with ion-selective electrodes (ISE). A large number of analyses in laboratories and in the field, such as testing water and wastewater quality, environmental monitoring and quality control in industrial processes, rely on these solutions. Ionic standard solutions are used to calibrate ion-selective electrodes and ensure precise measurement. Horiba's standard solutions have a known ion concentration. They are therefore essential for setting up the electrodes correctly before using them for test runs. Ionic strength controllers are specifically designed to adjust the ionic strength of the sample to enable accurate measurements. They are particularly important when the composition of the samples could affect the measurement or in samples with low ionic strength. The ionic strength can be adjusted to stabilize the ionic activity in the solution. This leads to more accurate measurement results. Ion-selective electrode filling solutionsIon-selective electrode filling solutions are specific solutions that are filled into ion-selective electrodes. They ensure the proper operation of the electrode and help to maintain the potential required to measure the specific ion. To ensure that measurements meet international standards and to ensure conformity with regulatory and compliance standards, these specialized solutions are essential. Many industries, from pharmaceutical to environmental, use these solutions to meet their quality and safety requirements. For users working in areas such as water analysis, environmental monitoring or regulatory testing environments, these solutions ensure the accuracy and reliability required for critical measurements. To provide reliable data for important environmental, health and safety decisions, they are a crucial part of analytical chemistry. Overall, HORIBA's solutions enable experts to make the best use of their instruments and achieve the precise results required for their applications. Manufacturer article number: 3200697165 (500-F-IFS)
HORIBA Ion standard solutions, ionic strength controllers and ion-selective electrode filling solutions are indispensable for accurate and reproducible measurements with ion-selective electrodes (ISE). A large number of analyses in laboratories and in the field, such as testing water and wastewater quality, environmental monitoring and quality control in industrial processes, rely on these solutions. Ionic standard solutions are used to calibrate ion-selective electrodes and ensure precise measurement. Horiba's standard solutions have a known ion concentration. They are therefore essential for setting up the electrodes correctly before using them for test runs. Ionic strength regulators are specifically designed to adjust the ionic strength of the sample to enable accurate measurements. They are particularly important when the composition of the samples could affect the measurement or in samples with low ionic strength. The ionic strength can be adjusted to stabilize the ionic activity in the solution. This leads to more accurate measurement results. Ion-selective electrode filling solutionsIon-selective electrode filling solutions are specific solutions that are filled into ion-selective electrodes. They ensure the proper operation of the electrode and help to maintain the potential required to measure the specific ion. To ensure that measurements meet international standards and to ensure conformity with regulatory and compliance standards, these specialized solutions are essential. Many industries, from pharmaceutical to environmental, use these solutions to meet their quality and safety requirements. For users working in areas such as water analysis, environmental monitoring or regulatory testing environments, these solutions ensure the accuracy and reliability required for critical measurements. To provide reliable data for important environmental, health and safety decisions, they are a crucial part of analytical chemistry. Overall, HORIBA's solutions enable experts to make the best use of their instruments and achieve the precise results required for their applications. Manufacturer article number:3200697184 (500-K-SL)