Quick Nutrient Analysis in Strawberry Production
Regular monitoring of nutrient levels such as nitrate (NO3-), potassium (K+) and calcium (Ca2+) in plant petioles, soil solution, irrigation water, and drain water produces not only good yield and fruit quality, but also reduces fertilizer cost and mitigates environmental hazards. The LAQUAtwin pocket meters are the perfect tools for testing as they directly measure samples and provide results in just few seconds allowing growers to identify and correct any nutrient deficiency or excess immediately.
Introduction
Strawberry production requires a root environment with good availability of essential nutrients to achieve optimum plant growth, fruit quality, and yield. Soil pH influences the availability of nutrients such as nitrate (NO3-), potassium (K+) and calcium (Ca2+) ions, which have specific roles in strawberry fruit quality - NO3- determines the size, K+ influences the taste, and Ca2+ affects the firmness. The nutrients should be present in a right balance to avoid competition or improper plant uptake. Aside from maintaining the correct soil pH for nutrient availability, the conductivity should also be closely and frequently monitored, as strawberry plants do not tolerate high conductivity value.
Plant sap analysis has been used by growers to manage crop nutrient content and fertilization strategies. A plant sap test gives a view of the nutrients available for the plant, at that time, for growth or development. It directly shows if a crop suffers from a nutrient deficiency or an excess. Soil solution analysis is also important for growers. It gives a view of the nutrient and salinity levels in the soil and nutrient leaching past the root zone. Soil solution is the water held in the soil, which contains a mixture of nutrients taken up by roots.
HORIBA offers LAQUAtwin pocket meters which provide reliable and accurate results for plant sap and soil testing parameters such as pH, conductivity (EC), nitrate (NO3-) / nitrate-nitrogen (NO3-N), potassium (K+), calcium (Ca2+) and sodium (Na+). Several research studies have proven that results obtained with LAQUAtwin pocket meters are strongly correlated with those of traditional laboratory analyses. With their unique and compact design, the LAQUAtwin pocket meters allow direct measurement of micro-volume sample (as low as 0.1ml) and deliver results in just a few seconds. These advantages enable growers to make fertilization and irrigation decisions quickly.
Method
Calibrate the LAQUAtwin pocket meters according to manufacturer’s instructions.
A. Plant Sap Analysis
For sampling, it is critical to always follow the same protocol and collect the correct tissue in order to get consistent and reliable results. The most recent mature trifoliate leaf is the best indicator of the most essential nutrients for plant growth (e.g., P, K, Ca, etc.) and the petiole from this leaf is the best indicator of NO3-N. Plant temperature should be within 20 to 25°C.
1. Collect 2 most recent mature trifoliate leaves and the associated petioles from 20 different strawberry plants to get a representative sample. The petiole must be detached from the plant near the crown.
2. Separate the petioles from the leaves and cut them into small pieces.
3. Load the small pieces of petioles into a garlic press or hydraulic sap press and squeeze them to extract sap.
4. Place the sap directly onto the respective sensors of LAQUAtwin nitrate and potassium pocket meters.
5. Compare the results with the reference values in Table 1 to evaluate the current nutritional condition of the plants and implement the best course of action.
6. Rinse the sensors with clean water before testing another sample or storing them.
B. Soil Solution Analysis
Soil solution for pH, salinity (usually reported as conductivity), and nutrient analysis can be extracted through lysimeters installed in the field – at 15-20cm depth, where strawberries have the bulk of their roots and at 50-60cm depth below most of the roots. Lysimeters are installed under vacuum pressure and pull water from the soil similar to the root of the plant. To extract suitable samples, the soil must have been recently wetted with rainfall or irrigation water.
1. Place the sample of extracted soil solution directly onto the respective sensors of LAQUAtwin pH, conductivity, sodium, nitrate, potassium, and calcium meters.
2. Record the results and monitor the nutrients on a weekly basis.
3. Rinse the sensors with clean water before testing another sample or storing them.
Results should be interpreted by comparing trends from season-to-season and block-to-block with strawberry performance indicators such as yield and fruit quality. Irrigation and drain water can also be analysed directly with LAQUAtwin pocket meters.
Strawberries have salt tolerance threshold of 1.0 mS/cm and will grow best in soil pH range of 5.5 to 6.5.
Figure 2: Cutting of petioles into small pieces
Figure 3: Loading of petioles into the chamber of garlic press for sap extraction.
Figure 4: Placing sap directly onto LAQUAtwin nitrate sensor.
Figure 5: pH and conductivity testing on soil solution.
Figure 6: Irrigation wáter testing with LAQUAtwin pocket meters.
Results and Benefits
Plant sap analysis provides information on the current nutritional status of the plant. This information makes it possible to fine-tune N application, to maximize yield and quality, and to extend the fruiting season. The plant sap analysis complements soil solution analysis.
Soil solution analysis can help growers make decisions about their irrigation and nutrient management program. It should be used to enhance nutrient management and not as a measure of overall soil nutrient status. Nitrate and salinity levels are the key focus of soil solution monitoring. As nitrate is a highly mobile nutrient, soil solution can help identify incorrect nitrogen application, which could result in nitrate accumulation within the root zone and nitrate leaching below the root zone. Potassium and calcium are bound to soil and their levels in soil solution do not provide a reliable indication of their supply and availability to the crop. However, potassium, calcium, and sodium levels in soil, irrigation water, and drain water should be checked regularly. Salinity levels measured in soil solution allow growers to perform corrective action (e.g., increase irrigation to maintain salinity levels) before symptoms appear on leaves, yields or crop quality. Overwatering leaches fertilizer out of the root zone and results in environmental hazard (e.g., groundwater contamination). Soil solution analysis can be tested throughout the growing season.
References and Suggested Readings
1. Castellanos, J. Manual de producción de tomate en invernadero. México 2009, p.200-201.
2. Ginés y Simón Navarro García. Química Agrícola, Tercera Edición 2013, p.245
3. Carlos Cadahia, Ediciones Mundi-Prensa. La Savia como índice de fertilización, 2008, page 246
4. Casteel, S. (2004). Strawberry Fertility and Nutrient Management. Available at:
bit.ly/2m1dsqr (Accessed: 27 February 2017).
5. Falivene, S. Soil Solution Analysis. Available at: bit.ly/2lNtukB (Accessed: 5 March 2017).
6. Singh, P. Soil Analysis in Strawberry Farm at Holleta, Ethiopia.
7. FAO Crop Salt Tolerance Data. Available at www.fao.org/docrep/005/y4263e/y4263e0e.htm
LAQUAtwin: the only meters with flat sensor technology.
HORIBA’s highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware. Sensors are easily replaced as required.
Calibrate and measure at the touch of a button — the smiley face will tell you when the result can be read.
LAQUAtwin is fully waterproof and dustproof.
The meter and sensor are fully waterproof* and dustproof, so you can take it anywhere.
* IP67 rated. Will withstand immersion for 30 minutes at 1 m. Not suitable for underwater use.
Carry case comes as standard for handy portability.
The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
Matching products
HORIBA pH Handheld Tester – Ideal for Water and Environmental Analysis Precise pH measurements on-site – compact, reliable, and easy to use The Horiba LAQUAtwin pH tester is ideal for water quality testing in rivers, drinking water, and process water. With a measurement range of 0.0 to 14.0 pH and a 2-point calibration, the tester is suitable for a wide range of pH analyses. Just a single drop of sample provides quick and reliable measurement results. The tester combines electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital display with backlight shows both pH and mV values. Features such as automatic stability detection and Auto-Hold simplify operation. With up to 400 hours of battery life, the tester is suitable for extended measurement series. Included are calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a carrying case. Handheld pH tester for fast and precise results With its wide measurement range and 2-point calibration, the Horiba LAQUAtwin pH tester is suitable for a variety of pH analyses. Even a single drop of sample is enough to obtain fast and accurate results. Its compact design makes the mobile pH tester highly user-friendly and allows on-site measurements without complex sample preparation or laboratory infrastructure. Robust, waterproof design with comprehensive features The tester integrates the electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital backlit display clearly shows pH and mV values. Features like automatic stability detection and Auto-Hold simplify daily use. With a battery life of up to 400 hours, the tester is suitable for long measurement series. The package includes calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a practical carrying case. Typical applications of the Horiba LAQUAtwin pH Pocket Tester Aquaculture and corals Aquariums Beer, beverages, and food Heating systems Laboratories and schools Horticulture Water treatment
Mobile pH Tester with 3-Point Calibration for On-the-Go Use Horiba LAQUAtwin pH Tester – ideal for water and environmental analysis The Horiba LAQUAtwin pH Tester pH-22 is compact, robust, and designed for mobile use. With up to three calibration points and a measurement range of 0.00 to 14.00 pH, this device delivers high precision and reliability. Direct measurement with just a single drop of sample provides fast results. Features such as automatic buffer recognition, temperature compensation, and Stabil/Hold functionality make daily operation simple and convenient. Mobile precision pH tester for reliable on-site measurements The tester combines electrode, display, and sample container in a dust- and waterproof IP67 housing, making it ideal for field and laboratory applications. The digital backlit display shows pH and mV values clearly and accurately. Automatic shut-off and battery status indicators ensure convenient operation. The package includes calibration buffer solutions (pH 4.01 and 7.00), batteries, a pipette, and a quick-start guide. Why accurate pH measurement is critical – and why a handheld tester is ideal pH is a key parameter in water, environmental, and process analysis because it significantly influences chemical reactions, biological processes, and material stability. Even small deviations can substantially impact water quality, product quality, or process safety. A mobile handheld pH tester allows fast, reliable measurements directly on site. Changes can be detected immediately, and corrective actions implemented without delay. The Horiba LAQUAtwin pH-22 combines this flexibility with high measurement precision, making it ideal for field, laboratory, and routine applications. Typical applications for the Horiba LAQUAtwin pH handheld tester Aquaculture and coral monitoring Beer, beverage, and food production Heating systems Laboratories and schools Environmental analysis Water treatment Horticulture
Manufacturer Part No. 3999960124 LAQUAtwin PH-33: The world's first pocket-sized PH meter Your mobile laboratory - for use on site: Ideal for water quality testing in aquatic, drinking and process water and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.1 ml (0.05 ml with sampling sheet B) Up to 5 calibration points pH, mV and temperature display Automatic calibration Automatic buffer recognition: USA & NIST pH buffers Automatic temperature compensation Temperature calibration: 5 to 40.0 ºC Automatic stable / automatic hold measurement Automatic switch off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Material: ABS epoxy Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instructions and quick reference guide
Manufacturer Part No. 3999960125 LAQUAtwin EC-11: The world's first pocket-sized conductivity meter Your mobile laboratory - for use on site: Ideal for water quality tests in aquariums, food, beekeeping (honey) and many other applications HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.12 ml Up to 2 calibration points Automatic range Automatic calibration Automatic standard detection: 1413µS/cm & 12.88mS/cm Automatic temperature compensation: 2%/ºC fixed Automatic stable / automatic hold measurement Automatic switch off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Materials: ABS epoxy housing and titanium coating with platinum black sensor Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with 1413 µS/cm & 12.88 mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, drops, instructions and quick reference guide
Manufacturer Part No. 3999960126 LAQUAtwin EC-22: The world's first pocket-sized conductivity meter Your mobile laboratory - for use on site: Ideal for water quality tests in aquariums, food and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity and temperature display Automatic range Automatic calibration Automatic standard detection: 1413µS/cm, 12.88mS/cm, 111.8mS/cm Automatic temperature compensation: 2%/ºC fixed Temperature calibration: 5 to 40.0 ºC Automatically stable / automatically held measurement Automatic switch-off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Materials: ABS epoxy housing and titanium coating with platinum black sensor Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instructions and quick reference guide
Manufacturer Part No. 3999960127 LAQUAtwin EC-33: The world's first pocket-sized conductivity meter Your mobile laboratory - for use on site: Ideal for water quality tests in aquariums, food and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity, TDS and temperature display Automatic range Automatic calibration Automatic standard detection: 1413µS/cm, 12.88mS/cm, 111.8mS/cm Automatic temperature compensation: 2%/ºC fixed Temperature calibration: 5 to 40.0 ºC 4 curves for the total dissolved solids content: TDS factor 0.4 to 1.0, EN 27888, 442, NaCl Automatically stable / automatically held measurement Automatic switch-off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Materials: ABS epoxy housing and titanium coating with platinum black sensor Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, drops, instructions and quick reference guide Horiba LAQUAtwin – Mobile Precision for Water Treatment The compact Horiba LAQUAtwin pocket testers deliver fast, accurate and user‑friendly on‑site measurement of key water parameters—directly from a single droplet. In the HeylNeomeris online shop, you’ll find carefully selected models designed for professional use in water treatment, environmental analysis, aquaculture, and laboratory routines. Why LAQUAtwin Devices Excel in Water Treatment: Ultra‑low sample volume: only 0.05 mL per measurement Rapid results: ideal for mobile checks and spot analyses Laboratory‑grade accuracy in a pocket‑sized instrument Effortless operation: no special training required IP67‑rated housing: waterproof, dustproof, and rugged for field use Key Applications in Water Treatment: Quick screening in drinking water testing or process water quality control Routine monitoring of parameters such as pH, conductivity, calcium, sodium, or nitrate Interim checks in laboratories or treatment plants where bench‑top instruments aren’t practical Perfect for service technicians, field engineers, and operators of small‑scale systems Sample Models Available in the HeylNeomeris Shop: Horiba LAQUAtwin pH‑11 – precision pH measurement Horiba LAQUAtwin EC‑33 – conductivity monitoring Horiba LAQUAtwin Na‑11, Ca‑11, NO₃‑11 – targeted ion analysis for sodium, calcium, and nitrate
Mobile Sodium Ion Tester from Horiba with Temperature Measurement – precise and robust High-precision sodium ion tester with 2-point calibration – ideal for water and environmental analysis The Horiba LAQUAtwin Na-11 sodium ion tester was specifically designed for accurate measurement of sodium concentrations in a wide range of samples. The device enables direct on-site measurements. Its clear display shows both the Na⁺ concentration and the sample temperature in a single step, making field, laboratory, and greenhouse work significantly more efficient. Mobile sodium ion tester for precise on-site measurements Featuring 2-point calibration and automatic standard recognition (150 and 2000 ppm), the instrument can be easily adapted to different measurement requirements. The integrated temperature display and automatic temperature compensation ensure accurate results even under fluctuating environmental conditions. The robust IP67 housing is dustproof and waterproof, making the tester suitable for demanding daily use. With a battery life of approximately 400 hours, reliable long-term operation is ensured. The tester is supplied with standard solutions, sampling sheets, batteries, and matching pipettes for immediate use. Why sodium measurement matters – and why a handheld tester is the ideal solution Measuring sodium ions plays a crucial role in water, environmental, food, and agricultural analysis. Excessively high or low sodium concentrations can significantly affect water quality, soil structure, plant growth, and the quality of food products and drinking water. Regulatory limits and quality standards further require regular monitoring. A mobile sodium ion handheld tester enables fast and precise analysis directly at the point of use, without time-consuming sampling or laboratory analysis. The Horiba LAQUAtwin Na-11 combines this flexibility with high measurement accuracy and ease of use, making it ideal for routine monitoring, quality control, and research applications. Typical applications for the Horiba sodium ion tester Environmental monitoring: Measurement of sodium concentrations in surface and groundwater to assess water quality and ensure compliance with environmental standards. Food and beverage production: Testing sodium levels in food and beverages for quality assurance, product development, and regulatory compliance. Agriculture: Monitoring sodium content in irrigation water and soils to support plant health and optimize water management. Research & development: Use in laboratories for experimental studies on sodium ion behavior under varying conditions. Education: Utilized in schools and universities to demonstrate the use of ion-selective electrodes in analytical chemistry.
Mobile Calcium Ion Tester from Horiba with Temperature Measurement – precise, compact, robust Handheld Ca²⁺ pocket tester with 2-point calibration and temperature display – ideal for water and environmental applications The mobile Horiba LAQUAtwin calcium ion tester measures both the Ca²⁺ concentration and the temperature of a sample. Equipped with an ion-selective sensor, a digital LCD display, and a minimal sample volume of only 0.3 ml (0.05 ml when using the sampling sheet), it delivers fast and reliable measurement results. Thanks to the integrated temperature display and automatic temperature compensation, calcium values can be measured accurately even under changing environmental conditions – making the device ideal for mobile applications. Mobile calcium ion tester for precise on-site measurements With two calibration points and automatic standard recognition (150 and 2000 ppm), the device can be flexibly adapted to different measurement situations. Temperature-compensated measurement, multiplicative compensation, automatic stability and hold modes, as well as automatic shut-off ensure easy and reliable operation. The tester is dustproof and waterproof according to IP67 and offers a long battery life of approximately 400 hours. It is supplied complete with standard solutions, sampling sheets, pipette, and batteries. Why calcium measurement is important – optimal results with the Horiba handheld tester Calcium is a key parameter in water, environmental, aquaculture, and food analysis. Calcium concentration influences water hardness, biological processes, coral growth, and product quality in beverages and food. Deviations can lead to ecological, technical, or quality-related impacts. A mobile calcium handheld tester allows fast analysis directly at the point of use without complex laboratory procedures. This makes it possible to detect changes immediately and take timely action. The Horiba LAQUAtwin calcium tester combines this flexibility with high measurement accuracy, simple operation, and a robust design. Typical applications of the Horiba LAQUAtwin calcium tester Aquaculture and corals Laboratories and schools Water treatment Beverages and food
Precise Potassium Ion Measurement on the Go – Mobile, Reliable, and Easy Precise potassium ion measurement with 2-point calibration and integrated temperature display The Horiba K-11 Potassium Pocket Tester was designed to determine potassium in a wide variety of samples with high precision. Thanks to the ion-selective electrode and the digital LCD screen with backlight, the tester is perfect for mobile water quality and environmental analyses. The minimal sample volume of only 0.3 ml (0.05 ml with sampling sheet) ensures reliable results even with small sample sizes. With its 2-point calibration and automatic standard recognition, the device can be flexibly adapted to different measurement conditions. The IP67 rating for dust and water protection, along with a long battery life of up to approximately 400 hours, makes the tester highly reliable for mobile use. Technical Features for Reproducible Potassium Measurements The potassium tester covers a wide measurement range from 4 to 9,900 ppm (mg/L) and additionally displays temperatures up to 50 °C with a resolution of 0.1 °C. The integrated temperature compensation ensures stable results even under changing environmental conditions. Automatic standard recognition, adjustable calibration values, and multiplication compensation guarantee high reproducibility across different sample types. This makes the K-11 suitable for both routine and demanding analytical tasks. Why Potassium Measurement Is Important – Ideal with the Horiba K-11 Hand Tester Potassium is an essential parameter in water, environmental, agricultural, and food analysis. In water bodies, potassium content affects water quality, in soils it is a key nutrient for healthy plant growth, and in food it plays an important role for nutrition and labeling requirements. A mobile potassium hand tester enables rapid on-site analysis without time-consuming laboratory testing. Changes can be detected immediately, and decisions can be made right away. The Horiba K-11 combines this flexibility with high measurement accuracy and ease of use – ideal for fieldwork, routine checks, and scientific studies. Where Can It Be Used? Environmental Monitoring: The K-11 is a fast and precise measurement tool for environmental technicians and scientists monitoring potassium concentrations in water bodies to ensure water quality and identify contamination sources. Agriculture: The K-11 allows farmers and agronomists to measure potassium in soil. This is crucial for fertilizer application and improving plant growth. Easy evaluation of soil extracts enables precise nutrient requirement determination. Food Industry: The tester is used by quality assurance personnel to check potassium content in beverages and food. These measurements are important for product development, health assessments, and compliance with nutritional labeling requirements. Teaching, Research, and Development: By deepening the understanding of potassium’s role in biological and chemical processes, the K-11 serves researchers and educators as a useful tool for experimental studies and educational purposes.
Horiba LAQUAtwin Nitrate Ion Tester NO3-11 for Precise On-Site Measurements Handheld tester with 2-point calibration, ideal for water and environmental measurements The Horiba LAQUAtwin Nitrate Ion Tester (NO3-11) is a portable device for direct determination of nitrate ions (NO3) and temperature in liquids and samples. Thanks to the ion-selective electrode and compact design, the tester delivers fast and reliable results. The integrated temperature unit enables temperature-compensated analysis and clearly displays both nitrate and temperature values on the digital LCD display. Mobile Nitrate Ion Tester for Precise On-Site Analyses The integrated temperature measurement enables temperature-compensated analysis and shows both nitrate and temperature values. Only very small sample volumes are required, minimizing sample consumption and increasing efficiency in daily use. The tester can be set up with up to two calibration points, with features such as automatic standard recognition, adjustable calibration values, and multiplication compensation for flexibility. Only minimal sample volumes are needed for each analysis, reducing sample usage and improving efficiency. Why Nitrate Measurement Is Crucial – and a Pocket Tester from Horiba Is Ideal Nitrate measurement plays a central role in agriculture, water management, and environmental monitoring. Elevated nitrate concentrations can affect drinking water quality, stress ecosystems, and contribute to over-fertilization. At the same time, nitrate is an essential nutrient for plants, and targeted control is vital for sustainable agriculture. A mobile nitrate pocket tester enables rapid on-site analysis without time-consuming laboratory tests. This allows early detection of contamination, immediate action, and reliable monitoring of legal limits. The Horiba LAQUAtwin NO3-11 combines this flexibility with high measurement accuracy and easy operation – ideal for routine checks and scientific applications. The tester can be configured with up to two calibration points. Features like automatic standard recognition, adjustable calibration values, and multiplication compensation provide high adaptability to different sample types and measurement conditions. Typical Applications of the Horiba LAQUAtwin Nitrate Ion Tester (NO3-11) Agriculture: To optimize fertilizer use, promote plant growth, and minimize environmental impact, farmers and agronomists use the tester to monitor nitrate levels in soils and irrigation water. Water Quality Management: To maintain nitrate concentrations within safe limits, the NO3-11 is used in water management to check drinking and wastewater quality. Environmental Monitoring: The NO3-11 allows environmental technicians and scientists to quickly analyze nitrate contamination in rivers, lakes, and groundwater, ensuring compliance with environmental standards and identifying pollution sources. Research and Development: The tester is used by scientists in environmental science, hydrology, and soil science to conduct detailed studies of the nitrogen cycle and the effects of nitrates on ecosystems.